Smart Structures and Systems

  • 제25권2호
  • /
  • Pages.123-133
  • /
  • 2020
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Modal parameter identification with compressed samples by sparse decomposition using the free vibration function as dictionary

  • Kang, Jie (School of Civil and Environmental Engineering, Harbin Institute of Technology at Shenzhen, University Town) ;
  • Duan, Zhongdong (School of Civil and Environmental Engineering, Harbin Institute of Technology at Shenzhen, University Town)
  • 투고 : 2019.01.24
  • 심사 : 2019.12.20
  • 발행 : 2020.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

Compressive sensing (CS) is a newly developed data acquisition and processing technique that takes advantage of the sparse structure in signals. Normally signals in their primitive space or format are reconstructed from their compressed measurements for further treatments, such as modal analysis for vibration data. This approach causes problems such as leakage, loss of fidelity, etc., and the computation of reconstruction itself is costly as well. Therefore, it is appealing to directly work on the compressed data without prior reconstruction of the original data. In this paper, a direct approach for modal analysis of damped systems is proposed by decomposing the compressed measurements with an appropriate dictionary. The damped free vibration function is adopted to form atoms in the dictionary for the following sparse decomposition. Compared with the normally used Fourier bases, the damped free vibration function spans a space with both the frequency and damping as the control variables. In order to efficiently search the enormous two-dimension dictionary with frequency and damping as variables, a two-step strategy is implemented combined with the Orthogonal Matching Pursuit (OMP) to determine the optimal atom in the dictionary, which greatly reduces the computation of the sparse decomposition. The performance of the proposed method is demonstrated by a numerical and an experimental example, and advantages of the method are revealed by comparison with another such kind method using POD technique.

키워드

과제정보

연구 과제 주관 기관 : Natural Science Foundation of China

참고문헌

  1. Bajwa, W., Haupt, J., Sayeed, A. and Nowak, R. (2006), "Compressive wireless sensing", Proceedings of the Fifth International Conference on Information Processing in Sensor Networks, Nashville, TN, USA, April.
  2. Bao, Y., Beck, J.L. and Li, H. (2011), "Compressive sampling for accelerometer signals in structural health monitoring", Struct. Heal. Monit., 10(3), 235-246. https://doi.org/10.1177/1475921710373287
  3. Bao, Y., Li, H., Sun, X., Yu, Y. and Ou, J. (2013), "Compressive sampling based data loss recovery for wireless sensor networks used in civil structural health monitoring", Struct. Heal. Monit., 12(1), 78-95. https://doi.org/10.1177/1475921712462936
  4. Bao, Y., Shi, Z., Wang, X. and Li, H. (2017), "Compressive sensing of wireless sensors based on group sparse optimization for structural health monitoring", Struct. Heal. Monit., 17(4), 823-836. https://doi.org/10.1177/1475921717721457
  5. Candes, E.J. (2006), "Compressive Sensing", Proceedings of the international congress of mathematicians, Madrid, Spain, August.
  6. Candes, E.J., Romberg, J. and Tao, T. (2006), "Robust uncertainty principles: Exact signal reconstruction from highly incomplete frequency information", IEEE Trans. Inf. Theory., 52(2), 489-509. https://doi.org/10.1109/TIT.2005.862083
  7. Cho, S., Jo, H., Jang, S., Park, J., Jung, H.J., Yun, C.B., Spencer, B.F. and Seo, J.W. (2010), "Structural health monitoring of a cable-stayed bridge using wireless smart sensor technology: Data analyses", Smart Struct. Syst., Int. J., 6(5-6), 461-480. https://doi.org/10.12989/sss.2010.6.5_6.461
  8. Donoho, D.L. (2006), "Compressed sensing", IEEE Trans. Inf. Theory., 52(4), 1289-1306. https://doi.org/10.1109/TIT.2006.871582
  9. Duan, Z. and Kang, J. (2014), "Compressed sensing techniques for arbitrary frequency-sparse signals in structural health monitoring", SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, San Diego, CA, USA, March.
  10. Eldar, Y. and Kutyniok, G. (2012), Compressed Sensing:Theory and Applications, Cambridge University Press, New York, NY, USA.
  11. Feng, C., Valaee, S. and Tan, Z. (2009), "Localization of wireless sensors using compressive sensing for manifold learning", Proceedings of the 2009 IEEE International Symposium on Workload Characterization, Austin, TX, USA, October.
  12. Fornasier, M. and Rauhut, H. (2011), Handbook of mathematical methods in imaging, Springer Science & Business Media, New York, NY, USA.
  13. Ganesan, V., Das, T., Rahnavard, N. and Kauffman, J.L. (2017), "Vibration-based monitoring and diagnostics using compressive sensing", J. Sound Vib., 394, 612-630. https://doi.org/10.1177/1475921712462936
  14. Hou, R., Xia. Y, Bao, Y. and Zhou, X. (2018), "Selection of regularization parameter for l1-regularized damage detection", J. Sound Vib., 423, 141-160. https://doi.org/10.1016/j.jsv.2018.02.064
  15. Huang, Y., Beck, J.L., Wu, S. and Li, H. (2016), "Bayesian compressive sensing for approximately sparse signals and application to structural health monitoring signals for data loss recovery", Probabilistic Eng. Mech., 46, 62-79. https://doi.org/10.1016/j.probengmech.2016.08.001
  16. Ling, Q. and Tian, Z. (2010), "Decentralized sparse signal recovery for compressive sleeping wireless sensor networks", IEEE Trans. Signal Process., 58(7), 3816-3827. https://doi.org/10.1109/TSP.2010.2047721
  17. Liu, E. and Temlyakov, V.N. (2012), "The orthogonal super greedy algorithm and applications in compressed sensing", IEEE Trans. Inf. Theory., 58(4), 2040-2047. https://doi.org/10.1109/TIT.2011.2177632
  18. Lynch, J.P. (2007), "An overview of wireless structural health monitoring for civil structures", Philos. Trans. A. Math. Phys. Eng., 365(1851), 345-372. https://doi.org/10.1098/rsta.2006.1932
  19. Lynch, J.P., Law, K.H., Kiremidjian, A.S., Kenny, T. and Carryer, E. (2002), "A wireless modular monitoring system for civil structures", Proceedings of the 20th International Modal Analysis Conference, Los Angeles, CA, USA, February.
  20. Lynch, J.P., Sundararajan, A., Law, K.H., Kiremidjian, A.S. and Carryer, E. (2003), "Power-efficient data management for a wireless structural monitoring system", Proceedings of the 4th International Workshop on Structural Health Monitoring, Stanford University, USA, September.
  21. Mascarenas, D., Cattaneo, A., Theiler, J. and Farrar, C. (2013), "Compressed sensing techniques for detecting damage in structures", Struct. Heal. Monit., 12(4), 325-338. https://doi.org/10.1177/1475921713486164
  22. O'Connor, S.M., Lynch, J.P. and Gilbert, A.C. (2014), "Compressed sensing embedded in an operational wireless sensor network to achieve energy efficiency in long-term monitoring applications", Smart Mater. Struct., 23(8), 085014. https://doi.org/10.1088/0964-1726/23/8/085014
  23. Pan, C.D., Yu. L., Liu, H.L. and Luo, W.F. (2018), "Moving force identification based on redundant concatenated dictionary and weighted l1-norm regularization", Mech. Syst. Signal Progress., 98, 32-49. https://doi.org/10.1016/j.ymssp.2017.04.032
  24. Park, J.Y., Wakin, M.B. and Gilbert, A.C. (2014), "Modal analysis with compressive measurements", IEEE Trans. Signal Process., 62(7), 1655-1670. https://doi.org/10.1109/TSP.2014.2302736
  25. Park, J.Y., Wakin, M.B. and Gilbert, A.C. (2015), "Sampling considerations for modal analysis with damping", Proceedings of Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2015, Vol. 9435, San Diego, CA, USA, March.
  26. Rauhut, H., Schnass, K. and Vandergheynst, P. (2008), "Compressed sensing and redundant dictionaries", IEEE Trans. Inf. Theory., 54(5), 2210-2219. https://doi.org/10.1109/TIT.2008.920190
  27. Spencer, B.F., Park, J.W., Mechitov, K.A., Jo, H. and Agha, G. (2017), "Next Generation Wireless Smart Sensors Toward Sustainable Civil Infrastructure", Procedia Eng., 171, 5-13. https://doi.org/10.1016/j.proeng.2017.01.304
  28. Wei, F. and Qiao, P. (2011), "Vibration-based damage identification methods: a review and comparative study", Struct. Heal. Monit., 10(1), 83-111. https://doi.org/10.1177/1475921710365419
  29. Xu, N., Rangwala, S. and Chintalapudi, K.K. (2004), "A wireless sensor network for structural monitoring", Proceedings of the 2nd International Conference on Embedded Networked Sensor Systems, MD, USA, November.
  30. Zhuo, P., Yuan, M. and Wakin, M. (2018), "A random demodulation architecture for sub-sampling acoustic emission signals in structural health monitoring", J. Sound Vib., 431, 390-404. https://doi.org/10.1016/j.jsv.2018.06.021
  31. Wang, Y. and Hao, H. (2015), "Damage identification scheme based on compressive sensing", J. Comput. Civ. Eng., 29(2), 04014037. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000324
  32. Zhang, C.D. and Xu, Y.L. (2016), "Comparative studies on damage identification with Tikhonov regularization and sparse regularization", Struct. Control Heal. Monit., 23(3), 560-579. https://doi.org/10.1002/stc.1785
  33. Zhou, S., Bao, Y. and Li, H. (2013), "Structural damage identification based on substructure sensitivity and l1 sparse regularization", SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, San Diego, CA, USA, March.
  34. Zhou, X., Xia. Y. and Weng, S. (2015), "L1 regularization approach to structural damage detection using frequency data", Struct. Heal. Monit., 14(6), 571-582. https://doi.org/10.1177/1475921715604386