Geomechanics and Engineering

  • 제20권3호
  • /
  • Pages.207-220
  • /
  • 2020
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Stabilization of oily contaminated clay soils using new materials: Micro and macro structural investigation

  • 투고 : 2019.12.04
  • 심사 : 2020.01.18
  • 발행 : 2020.02.10
⟨ 이전 논문 다음 논문 ⟩

초록

Clay soils have a big potential to become contaminated with the oil derivatives because they cover a vast area of the earth. The oil derivatives diffusion in the soil lead to soil contamination and changes the physical and mechanical properties of the soil specially clay soils. Soil stabilization by using new material is very important for geotechnical engineers in order to improve the engineering properties of the soil. The main subjects of this research are a- to investigate the effect of the cement and epoxy resin mixtures on the stabilization and on the mechanical parameters as well as the microstructural properties of clay soils contaminated with gasoline and kerosene, b- study on the phenomenon of clay concrete development. Practical engineering indexes such as Unconfined Compressive Strength (UCS), elastic modulus, toughness, elastic and plastic strains are all obtained during the course of experiments and are used to determine the optimum amount of additives (cement and epoxy resin) to reach a practical stabilization method. Microstructural tests were also conducted on the specimens to study the changes in the nature and texture of the soil. Results obtained indicated that by adding epoxy resin to the contaminated soil specimens, the strength and deformational properties are increased from 100 to 1500 times as that of original soils. Further, the UCS of some stabilized specimens reached 40 MPa which exceeded the strength of normal concrete. It is interesting to note that, in contrast to the normal concrete, the strength and deformational properties of such stabilized specimens (including UCS, toughness and strain at failure) are simultaneously increased which further indicate on suitability and applicability of the current stabilization method. It was also observed that increasing cement additive to the soil has negligible effect on the contaminated soils stabilized by epoxy resin. In addition, the epoxy resin showed a very good and satisfactory workability for the weakest and the most sensitive soils contaminated with oil derivatives.

키워드

참고문헌

  1. Ahnberg, H., Johanson, S.E., Pihl, H. and Carlsson, T. (2003), "Stabilising effects of different binders in some Swedish soils", Proc. Inst. Civ. Eng. Ground Improv., 7(1), 9-23. https://doi.org/10.1680/grim.2003.7.1.9.
  2. Akinwumi, I.I., Diwa, D. and Obianigwe, N. (2014), "Effects of crude oil contamination on the index properties, strength and permeability of lateritic clay", Int. J. Appl. Sci. Eng. Res., 3, 816-824.
  3. Al-Khanbashi, A. and Abdalla, S.W. (2006), "Evaluation of three waterborne polymers as stabilizers for sandy soil", Geotech. Geol. Eng., 24(6), 1603-1625. https://doi.org/10.1007/s10706-005-4895-3.
  4. Anagnostopoulos, C.A. (2015), "Strength properties of an epoxy resin and cement-stabilized silty clay soil", Appl. Clay Sci., 114, 517-529. https://doi.org/10.1016/j.clay.2015.07.007.
  5. Anagnostopoulos, C.A., Stavridakis, E.and Grammatikopoulos, I. (2003), "Engineering behaviour of cement acrylic resin treated soft clay", Proceedings of the International Conference on Problematic Soils, Nottingham, U.K., July.
  6. ASTM (1994), Annual Book of ASTM Standards, American Society for Testing and Materials, ASTM International, West Conshohocken, Philadelphia, U.S.A.
  7. ASTM (1997), ASTM C 938-97: Standard Practice for Proportioning Grout Mixtures for Preplaced Aggregate Concrete, ASTM International, West Conshohocken, Philadelphia, U.S.A.
  8. ASTM (2016), ASTM C 938-16: Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete, ASTM International, West Conshohocken, Philadelphia, U.S.A.
  9. Ayotamuno, J., Kogbara, R.B. and Taleat, M.O. (2006), "Bioremediation of a petroleum-hydrocarbon polluted agricultural soil at different levels of water application in Port Harcourt, Nigeria", J. Food Agr. Environ., 4(3), 214-217.
  10. Bergado, D.T., Ruenkrairergsa, T., Taesiri, Y. and Balasubramanian, A.S. (1999), "Deep soil mixing used to reduce embankment settlement", Proc. Inst. Civ. Eng. Ground Improv., 3(4), 145-162. https://doi.org/10.1680/gi.1999.030402.
  11. Burgess, L.C. (2013), Organic Pollutants in Soil, in Soils and Human Health, CRC Press, Boca Raton, Florida, U.S.A., 83-106.
  12. Ebuehi, O.A.T., Abibo, I.B., Shekwolo, P.D., Sigismund, K.I., Adoki, A. and Okoro, I.C. (2005), "Remediation of crude oil contaminated soil by enhanced natural attenuation technique", J. Appl. Sci. Environ. Manag., 9(1), 103-106.
  13. Estabragh, A.R., Beytolahpour, I. and Javadi, A.A. (2011), "Effect of resin on the strength of soil-cement mixture", J. Mater. Civ. Eng., 23(7), 969-976. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000252.
  14. Greenberg, B.M., Huang, X., Gerhardt, K., Glick, B.R., Gurska, J., Wang, W., Lampi, M., Khalid, A., Isherwood, D., Chang, P., Wang, H., Wu, S.S., Yu, X.M., Dixon, D.G. and Gerwing, P. (2007), "Field and laboratory tests of a multi-process phytoremediation system for decontamination of petroleum and salt impacted soils", Proceedings of the 9th International In Situ and On-Site Bioremediation Symposium, Baltimore, Maryland, U.S.A., May.
  15. Hamidi, S. and Marandi, S.M. (2017), "Effect of clay mineral types on the strength and microstructure properties of soft clay soils stabilized by epoxy resin", Geomech. Eng., 15(2), 729-738. https://doi.org/10.12989/gae.2018.15.2.729.
  16. Hamidi, S. and Marandi, S.M. (2018), "Clay concrete and effect of clay minerals types on stabilized soft clay soils by epoxy resin", Appl. Clay Sci., 151, 92-101. https://doi.org/10.1016/j.clay.2017.10.010.
  17. Horpibiulsuk, S., Miura, N., Nagaraj, T.S. and Koga, H. (2002), "Improvement of soft marine clays by deep mixing technique", Proceedings of the 12th International Offshore and Polar Engineering Conference, Kitakyushu, Japan, May.
  18. Horpibulsk, S., Rachan, R., Suddeepong, A. and Chinkulkijniwat, A. (2011), "Strength development in cement admixed Bangkok clay: laboratory and field investigations", Soils Found., 51(2), 239-251. https://doi.org/10.3208/sandf.51.239.
  19. Impe, W.F.V. and Flores, R.D.V. (2006), "Deep mixing in underwater conditions: a laboratory and field investigation", Proc. Inst. Civ. Eng. Ground Improv., 10(1), 15-22. https://doi.org/10.1680/grim.2006.10.1.15.
  20. Kamruzzaman, A.H.M., Chew, S.H. and Lee, F.H. (2000), "Engineering behavior of cement treated Singapore marine clay", Proceedings of the International Conference on Geotechnical and Geological Engineering, Melbourne, Australia, November.
  21. Khamehchiyan, M., Charkhabi, A.H. and Tajik, M. (2007), "Effects of crude oil contamination on geotechnical properties of clayey and sandy soil", Eng. Geol., 89, 220-229. https://doi.org/10.1016/j.enggeo.2006.10.009.
  22. Khemissa, M. and Mahamedi, A. (2014), "Cement and lime mixture stabilization of an expansive over consolidated clay", Appl. Clay Sci., 95, 104-110. https://doi.org/10.1016/j.clay.2014.03.017.
  23. Khosravi, E., Ghasemzadeh, H., Sabour, M.R. and Yazdani, H. (2013), "Geotechnical properties of gas oil contaminated kaolinite", Eng. Geol., 166, 11-16. https://doi.org/10.1016/j.enggeo.2013.08.004.
  24. Kogbara, R.B. and Al-Tabbaa, A. (2011), "Mechanical and leaching behaviour of slag-cement and lime-activated slag stabilised/solidified contaminated soil", Sci. Total Environ., 409(11), 2325-2335. https://doi.org/10.1016/j.scitotenv.2011.02.037.
  25. Lorenzo, G.A., Bergado, D.T. and Soralump, S. (2006), "New and economical mixing method of cement-admixed clay for DMM application", Geotech. Test. J., 29(1), 54-63. https://doi.org/10.1520/GTJ12129.
  26. Meegoda, J.N. and Ratnaweera, P. (1994), "Compressibility of contaminated fine grained soils", Geotech. Test. J., 17(1), 101-112. https://doi.org/10.1520/GTJ10078J.
  27. Murugesan, S. and Rajagopal, K. (2007), "Model tests on geosynthetics-encased Stone column", Geosynth. Int., 14, 346-354. https://doi.org/10.1680/gein.2007.14.6.346.
  28. Nazir, A.K. (2011), "Effect of motor oil contamination on geotechnical properties of over consolidated clay", Alexandria Eng. J., 50, 331-335. https://doi.org/10.1016/j.aej.2011.05.002.
  29. Obeta, I.N. and Eze-uzomaka, O.J. (2013), "Geotechnical properties of waste engine oil contaminated laterites", Nigerian J. Technol., 32, 203-210.
  30. Ouhadi, V.R. and Yong, R.N. (2003), "Impact of clay microstructure and mass absorption coefficient on the quantitative mineral identification by XRD analysis", Appl. Clay Sci., 23, 141-148. https://doi.org/10.1016/S0169-1317(03)00096-6.
  31. Pakbaz, M.S. and Alipour, R. (2012), "Influence of cement addition on the geotechnical properties of an Iranian clay", Appl. Clay Sci., 67-68, 1-4. https://doi.org/10.1016/j.clay.2012.07.006.
  32. Petchgate, K., Jongpradist, P. and Jamsawang, P. (2004), "Field flexural behaviour of soil-cement column", Proceedings of the 5th Symposium 2004 on Soil/Ground Improvement and Geosynthetics, Thonburi, Thailand, December.
  33. Petchgate, K., Jongpradist, P. and Panmanajareonphol, S. (2003), "Field pile load test of soil-cement column in soft clay", Proceedings of the International Symposium 2003 on Soil/Ground Improvement and Geosynthetics in Waste Containment and Erosion Control Applications, Thailand, December.
  34. Porbaha, A. (1998), "State of the art in deep mixing technology, part I: basic concepts and overview", Proc. Inst. Civ. Eng. Ground Improv., 2(2), 81-92. https://doi.org/10.1680/gi.1998.020204.
  35. Porbaha, A. (2002), "State of the art in quality assessment of deep mixing technology", Proc. Inst. Civ. Eng. Ground Improv., 6(3), 95-120. https://doi.org/10.1680/grim.2002.6.3.95.
  36. Puppala, A.J., Wattanasanticharoen, E. and Punthutaecha, K. (2003), "Experimental evaluations of stabilisation methods for sulphate-rich expansive soils", Proc. Inst. Civ. Eng. Ground Improv., 7(1), 25-35. https://doi.org/10.1680/grim.2003.7.1.25.
  37. Rubright, R. and Bandimere, S. (2004), Ground Improvement, Spon Press, London, U.K., 440.
  38. Saride, S., Puppala, A.J. and Chikyala, S.R. (2013), "Swell-shrink and strength behaviors of lime and cement stabilized expansive organic clays", Appl. Clay Sci., 85, 39-45. https://doi.org/10.1016/j.clay.2013.09.008.
  39. Sukpunya, A., Jotisankasa, A. (2016), "Large simple shear testing of soft Bangkok clay stabilized with soil-cement-columns and its application", Soils Found., 56(4), 640-651. https://doi.org/10.1016/j.sandf.2016.07.005.
  40. Sukontasukkul, P. and Jamsawang, P. (2012), "Use of steel and polypropylene fibers to improve flexural performance of deep soil-cement column", Constr. Build. Mater., 29, 201-205. https://doi.org/10.1016/j.conbuildmat.2011.10.040.
  41. Tabbaa, A.A. (2003), "Soil mixing in the UK 1991-2001: State of practice report", Proc. Inst. Civ. Eng. Ground Improv., 7(3), 117-126. https://doi.org/10.1680/grim.2003.7.3.117.
  42. Vichan, S. and Rachan, R. (2013), "Chemical stabilization of soft Bangkok clay using the blend of calcium carbide residue and biomass ash", Soils Found., 53(2), 272-281. https://doi.org/10.1016/j.sandf.2013.02.007
  43. Voottipruex, P. and Jamsawang, P. (2014), "Characteristics of expansive soils improved with cement and fly ash in Northern Thailand", Geomech. Eng., 6(5), 437-453. https://doi.org/10.12989/gae.2014.6.5.437
  44. Wu, M., Zhao, X. and Dou, Y.M. (2005), "Application of stiffened deep cement mixed column in ground improvement", Proceedings of the International Conference on Deep Mixing Best Practices and Recent Advances. Stockholm, Sweden, May.
  45. Yang, Y., Wang, G., Xie, S., Tu, X. and Huang, X. (2013), "Effect of mechanical property of cemented soil under the different pH value", Appl. Clay Sci., 79, 19-24. https://doi.org/10.1016/j.clay.2013.02.014.
  46. Yi, Y., Gu, L. and Liu, S. (2015), "Microstructural and mechanical properties of marine soft clay stabilized by lime-activated ground granulated blast furnace", Appl. Clay Sci., 103, 71-76. https://doi.org/10.1016/j.clay.2014.11.005.
  47. Yi, Y., Gu, L., Liu, S. and Jin, F. (2016), "Magnesia reactivity on activating efficacy for ground granulated blast furnace slag for soft clay stabilization", Appl. Clay Sci., 126, 57-62. https://doi.org/10.1016/j.clay.2016.02.033.

피인용 문헌

  1. Mechanical properties and microstructures of stabilised dredged expansive soil from coal mine vol.25, pp.2, 2020, https://doi.org/10.12989/gae.2021.25.2.143
  2. Removal behaviors of Cu and Pb from heavy metal contaminated silts flushed by citric acid vol.26, pp.5, 2021, https://doi.org/10.12989/gae.2021.26.5.489