Geomechanics and Engineering

  • 제20권6호
  • /
  • Pages.485-495
  • /
  • 2020
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Compression characteristics of filling gangue and simulation of mining with gangue backfilling: An experimental investigation

  • Wang, Changxiang (College of Mining and Safety Engineering, Shandong University of Science and Technology) ;
  • Shen, Baotang (College of Mining and Safety Engineering, Shandong University of Science and Technology) ;
  • Chen, Juntao (College of Mining and Safety Engineering, Shandong University of Science and Technology) ;
  • Tong, Weixin (College of Mining and Safety Engineering, Shandong University of Science and Technology) ;
  • Jiang, Zhe (College of Mining and Safety Engineering, Shandong University of Science and Technology) ;
  • Liu, Yin (College of Mining and Safety Engineering, Shandong University of Science and Technology) ;
  • Li, Yangyang (College of Mining and Safety Engineering, Shandong University of Science and Technology)
  • 투고 : 2019.11.16
  • 심사 : 2020.02.17
  • 발행 : 2020.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

Based on the movement characteristics of overlying strata with gangue backfilling, the compression test of gangue is designed. The deformation characterristics of gangue is obtained based on the different Talbot index. The deformation has a logarithmic growth trend, including sharp deformation stage, linear deformation stage, rheological stage, and the resistance to deformation changes in different stages. The more advantageous Talbot gradation index is obtained to control the surface subsidence. On the basis of similarity simulation test with gangue backfilling, the characteristics of roof failure and the evolution of the supporting force are analyzed. In the early stage of gangue backfilling, beam structure damage directly occurs at the roof, and the layer is separated from the overlying rock. As the working face advances, the crack arch of the basic roof is generated, and the separation layer is closed. Due to the supporting effect of filling gangue, the stress concentration in gangue backfilling stope is relatively mild. Based on the equivalent mining height model of gangue backfilling stope, the relationship between full ratio and mining height is obtained. It is necessary to ensure that the gradation of filling gangue meets the Talbot distribution of n=0.5, and the full ratio meets the protection grade requirements of surface buildings.

키워드

과제정보

연구 과제 주관 기관 : Shandong Provincial Natural Science Foundation, National Natural Science Foundation of China, Ministry of Science and Technology

The research described in this paper was financially supported from the funding of the Shandong Provincial Doctoral Program for Overseas Studies, Taishan Scholar Talent Team Support Plan for Advantaged & Unique Discipline Areas and Key research and development plan of Shandong Province (2018GSF117018; 2018GSF120003; 2019GSF111024), Shandong Provincial Natural Science Foundation (ZR2019BEE013) and National Natural Science Foundation of China(51804179; 51604167; 51974173), State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology(MDPC2016ZR01).

참고문헌

  1. An, B., Miao, X., Zhang, J., Ju, F. and Zhou, N. (2016), "Overlying strata movement of recovering standing pillars with solid backfilling by physical simulation", Int. J. Min. Sci. Technol., 26(2), 301-307. https://doi.org/10.1016/j.ijmst.2015.12.017.
  2. Casini, F., Viggiani, G.M.B. and Springman, S.M. (2013), "Breakage of an artificial crushable material under loading", Granul. Matter 15(5), 661-673. https://doi.org/10.1007/s10035-013-0432-x
  3. Chen, S.J., Yin, D. W., Jiang, N., Wang, F. and Guo, W.J. (2019), "Simulation study on effects of loading rate on uniaxial compression failure of composite rock-coal layer", Geomech. Eng., 17(4), 333-342. https://doi.org/10.12989/gae.2019.17.4.333.
  4. Coop, M.R., Sorensen, K.K., Freitas, T.B. and Georgoutsos, G (2004), "Particle breakage during shearing of a carbonate sand", Geotechnique, 54(3), 157-163. https://doi.org/10.1680/geot.2004.54.3.157.
  5. Donohue, S., O'Sullivan, C. and Long, M. (2009), "Particle breakage during cyclic triaxial loading of a carbonate sand", Geotechnique, 59(5), 477-482. https://doi.org/10.1680/geot.2008.T.003.
  6. Friedemann, J., Wagner, A., Heinze, A., Krzack, S. and Meyer, B. (2016), "Direct optical observation of coal particle fragmentation behavior in a drop-tube reactor", Fuel, 166, 382-391. https://doi.org/10.1016/j.fuel.2015.11.007.
  7. Ghabchi, R., Zaman, M., Kazmee, H. and Singh, D. (2014), "Effect of shape parameters and gradation on laboratorymeasured permeability of aggregate bases", Int. J. Geomech., 15(4), 04014070. http://dx.doi.org/10.1061/(ASCE)GM.1943-5622.0000397
  8. Gu, H., Tao, M., Wang, J., Jiang, H., Li, Q. and Wang, W. (2018), "Influence of water content on dynamic mechanical properties of coal", Geomech. Eng., 16(1), 85-95. https://doi.org/10.12989/gae.2018.16.1.085.
  9. Guida, G., Bartoli, M., Casini, F. and Viggiani, G.M. (2016), "Weibull distribution to describe grading evolution of materials with crushable grains", Procedia Eng., 158, 75-80. https://doi.org/10.1016/j.proeng.2016.08.408.
  10. Guo, G., Zhu, X., Zha, J. amd Wang, Q. (2014), "Subsidence prediction method based on equivalent mining height theory for solid backfilling mining", Trans. Nonferr. Metals Soc. China, 24(10), 3302-3308. https://doi.org/10.1016/S1003-6326(14)63470-1.
  11. Guo, W. (2013), Backfill Mining Technology in Coal Mines, China Coal Industry Publishing House, Beijing, China.
  12. Guo, W., Gu, Q., Tan, Y. and Hu, S. (2019), "Case studies of rock bursts in tectonic areas with facies change", Energies, 12(7), 1330. https://doi.org/10.3390/en12071330.
  13. Guo, W., Yu, F., Tan, Y. and Zhao, T. (2019), "Experimental study on the failure mechanism of layer-crack structure", Energy Sci. Eng., 1-22. https://doi.org/10.1002/ese3.407.
  14. Hu, C., Wang, X., Mei, Y., Yuan, Y. and Zhang, S. (2018), "Compaction techniques and construction parameters of loess as filling material", Geomech. Eng., 15(6), 1143-1151. https://doi.org/10.12989/gae.2018.15.6.1143.
  15. Indraratna, B. and Locke, M.R (1999), "Design methods for granular filters-Critical review", Geotech. Eng., 137(3), 137-147. https://doi.org/10.1680/gt.1999.370303.
  16. Karacan, C.O. (2010), "Prediction of porosity and permeability of caved zone in longwall gobs", Transp. Porous Media, 82, 413-439. https://doi.org/10.1007/s11242-009-9437-7.
  17. Kratzsch, I.H. (1983), "Mining subsidence engineering", Environ. Geol. Water Sci., 8(3), 133-136. https://doi.org/10.1007/BF02509900.
  18. Li, J., Huang, Y., Qiao, M., Chen, Z., Song, T., Kong, G., Gao, H. and Guo, L. (2018), "Effects of water soaked height on the deformation and crushing characteristics of loose gangue backfill material in solid backfill coal mining", Processes, 6(6), 64. https://doi.org/10.3390/pr6060064
  19. Li, M., Zhang, J. and Gao, R. (2016), "Compression characteristics of solid wastes as backfill materials", Adv. Mater. Sci. Eng., 2496194. http://dx.doi.org/10.1155/2016/2496194.
  20. Li, Y.Y., Zhang, S.C. and Zhang, X. (2018), "Classification and fractal characteristics of coal rock fragments under uniaxial cyclic loading conditions", Arab. J. Geosci., 11(9), 201-212. https://doi.org/10.1007/s12517-018-3534-2.
  21. Liu, X.S., Gu, Q.H., Tan, Y.L., Ning, J.G. and Jia, Z. (2019). "Mechanical Characteristics and Failure Prediction of Cement Mortar with a Sandwich Structure". Minerals, 9(3), 143. https://doi.org/10.3390/min9030143
  22. Ma, D., Duan, H.Y., Liu, J.F., Li, X.B. and Zhou, Z.L. (2019), "The role of gangue on the mitigation of mining-induced hazards and environmental pollution: An experimental investigation", Sci. Total Environ., 664(10) 436-448. https://doi.org/10.1016/j.scitotenv.2019.02.059.
  23. Ma, D., Mohammad, R., Yu, H.S. and Bai, H.B. (2017), "Variations of hydraulic properties of granular sandstones during water inrush: Effect of small particle migration", Eng. Geol., 217(30) 61-70. https://doi.org/10.1016/j.enggeo.2016.12.006.
  24. Marcin, L. and Miguel, A. (2016), "Characteristics of carbon dioxide sorption in coal and gas shale-The effect of particle size", J. Nat. Gas Sci. Eng., 28, 558-565. https://doi.org/10.1016/j.jngse.2015.12.037.
  25. Muriithi, G.N., Petrik, L.F., Gitari, W.M. and Doucet, F.J. (2017), "Synthesis and characterization of hydrotalcite from South African Coal fly ash", Powder Technol., 312, 299-309. https://doi.org/10.1016/j.powtec.2017.02.018.
  26. Poulsen, B.A. and Adhikary, D.P. (2013), "A numerical study of the scale effect in coal strength", Int. J. Rock Mech. Min. Sci., 63, 62-71. https://doi.org/10.1016/j.ijrmms.2013.06.006.
  27. Rozenblat, Y., Portnikov, D., Levy, A., Kalman, H., Aman, S. and Tomas, J. (2011), "Strength distribution of particles under compression", Powder Technol., 208(1), 215-224. https://doi.org/10.1016/j.powtec.2010.12.023.
  28. Shahriar, M.A., Sivakugan, N., Das, B.M., Urquhart, A. and Tapiolas, M. (2015), "Water table correction factors for settlements of shallow foundations in granular soils", Int. J. Geomech., 15(1), 06014015. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000391.
  29. State Administration of Coal Industry (2017), Regulations for the Preservation and Mining of Coal Pillars in Buildings, Water Bodies, Railways and Main Roadways, Coal Industry Publishing House, Beijing, China.
  30. Sun, W., Du, H., Zhou, F. and Shao, J. (2019), "Experimental study of crack propagation of rock-like specimens containing conjugate fractures", Geomech. Eng., 17(4), 323-331. https://doi.org/10.12989/gae.2019.17.4.323.
  31. Talbot, A.N., Brown, H.A. and Richart, F.E. (1923). "The strength of concrete-its relation to the cement, aggregates and water", University of Illinois at Urbana Champaign, Illinois, U.S.A.
  32. Vogler, D., Amann, F., Bayer, P. and Elsworth, D. (2016), "Permeability evolution in natural fractures subject to cyclic loading and gouge formation", Rock Mech. Rock Eng., 49, 3463-3479. https://doi.org/10.1007/s00603-016-1022-0.
  33. Wang, C., Jiang, N., Shen, B., Sun, X., Zhang, B., Lu, Y. and Li, Y. (2019), "Distribution and evolution of residual voids in longwall old goaf", Geomech. Eng., 19(2), 105-114. https://doi.org/10.12989/gae.2019.19.2.105.
  34. Wang, C., Lu, Y., Li, Y., Zhang, B. and Liang, Y. (2019), "Deformation process and prediction of filling gangue: A case study in China", Geomech. Eng., 18(4), 417-426. https://doi.org/10.12989/gae.2019.18.4.417.
  35. Wang, H., Poulsen, B.A., Shen, B., Xue, S. and Jiang, Y. (2011), "The influence of roadway backfill on the coal pillar strength by numericalinvestigation", Int. J. Rock Mech. Min. Sci., 48(3), 443-450. https://doi.org/10.1016/j.ijrmms.2010.09.007.
  36. Yin, D., Chen, S. and Liu, X.Q. (2018), "Effect of joint angle in coal on failure mechanical behavior of roof rock-coal combined body", Quart. J. Eng. Geol. Hydrogeol., 51(2), 202-209. https://doi.org/10.1144/qjegh2017-041.
  37. Zhang, B. and Meng, Z. (2019), "Experimental study on floor failure of coal mining above confined water", Arab. J. Geosci., 12(4), 114-123. https://doi.org/10.1007/s12517-019-4250-2.
  38. Zhang, J., Li, B., Zhou, N. and Zhang, Q. (2016), "Application of solid backfilling to reduce hard-roof caving and longwall coal face burst potential", Int. J. Rock Mech. Min. Sci., 88, 197-205. http://dx.doi.org/10.1016%2Fj.ijrmms.2016.07.025. https://doi.org/10.1016/j.ijrmms.2016.07.025
  39. Zhang, Q., Zhang, J., Han, X., Ju, F., Tai, Y. and Li, M. (2016), "Theoretical research on mass ratio in solid backfill coal mining", Environ. Earth Sci., 75(7), 1-11. https://doi.org/10.1007/s12665-015-5234-5.
  40. Zhang, X., Lin, J., Liu, J., Li, F. and Pang, Z. (2017), "Investigation of hydraulic-mechanical properties of paste backfill containing coal gangue-fly ash and its application in an underground coal mine", Energies, 10(9), 1309. https://doi.org/10.3390/en10091309.
  41. Zhao, J., Jiang, N. and Yin, L. (2019), "The effects of mining subsidence and drainage improvements on a waterlogged area", Bull. Eng. Geol. Environ., 78(5), 3815-3831. https://doi.org/10.1007/s10064-018-1356-9.
  42. Zhao, J., Yin, L. and Guo, W. (2018), "Stress-seepage coupling of cataclastic rock masses based on digital image technologies", Rock Mech. Rock Eng., 51(8), 2355-2372. https://doi.org/10.1007/s00603-018-1474-5.

피인용 문헌

  1. Multifactor Evaluation of Multiple Service Support and Optimization of Working Resistance of New Support Based on Dynamic Pressure vol.2020, 2020, https://doi.org/10.1155/2020/8858635
  2. Experimental Study on Mechanical Properties and Acoustic Emission Characteristics of Water Bearing Sandstone under Stable Cyclic Loading and Unloading vol.2020, 2020, https://doi.org/10.1155/2020/9472656
  3. The Influential Factors and Characteristics of Tight Sandstone Gas Reservoir: A Case Study in Ordos Basin in China vol.2020, 2020, https://doi.org/10.1155/2020/6690043
  4. Effect of Sea-Level Change on Deep-Sea Sedimentary Records in the Northeastern South China Sea over the past 42 kyr vol.2020, 2020, https://doi.org/10.1155/2020/8814545
  5. Nonlinear Creep Model of Deep Gangue Backfilling Material and Time-Dependent Characteristics of Roof Deformation in Backfilling Mining vol.2020, 2020, https://doi.org/10.1155/2020/8816871
  6. Insight into the Pore Structures and Its Impacts on Movable Fluid in Tight Sandstones vol.2020, 2020, https://doi.org/10.1155/2020/8820023
  7. Freeze-Thaw Stability Analysis of the High-Ice Content Soil-Rock Cutting Slope: A Case Study in Oroqen Autonomous Banner, North China vol.2020, 2020, https://doi.org/10.1155/2020/8825007
  8. Experimental System of Hydrodynamic Action of Dunhuang Mogao Grottoes under Temperature-Humidity-Mechanical (THM) Coupling vol.2020, 2020, https://doi.org/10.1155/2020/8831284
  9. Experimental Development Process of a New Cement and Gypsum-Cemented Similar Material considering the Effect of Moisture vol.2020, 2020, https://doi.org/10.1155/2020/8831801
  10. Stability Monitoring and Analysis of High and Steep Slope of a Hydropower Station vol.2020, 2020, https://doi.org/10.1155/2020/8840269
  11. A New Decision Method of Filling Ratio Based on Energy Matching of Surrounding Rock and Backfill vol.2020, 2020, https://doi.org/10.1155/2020/8856537
  12. Numerical Simulation on Heat Transfer Characteristics of Water Flowing through the Fracture of High-Temperature Rock vol.2020, 2020, https://doi.org/10.1155/2020/8864028
  13. Simulation and Recognition of Concrete Lining Infiltration Degree via an Indoor Experiment vol.2020, 2020, https://doi.org/10.1155/2020/8873315
  14. Numerical Investigation of Hydraulic Fracture Extension Based on the Meshless Method vol.2020, 2020, https://doi.org/10.1155/2020/8881901
  15. Characterization of Shale Pore Structure by Multitechnique Combination and Multifractal Analysis and Its Significance vol.2020, 2020, https://doi.org/10.1155/2020/8896940
  16. Numerical Analysis and Deformation Mechanism Study on an Excavated High-Steep Slope of a Hydropower Station vol.2020, 2020, https://doi.org/10.1155/2020/3402762
  17. Study of the Stability of a Soil-Rock Road Cutting Slope in a Permafrost Region of Hulunbuir vol.2020, 2020, https://doi.org/10.1155/2020/6701958
  18. The Key Stratum Structure Morphology of Longwall Mechanized Top Coal Caving Mining in Extra-Thick Coal Seams: A Typical Case Study vol.2020, 2020, https://doi.org/10.1155/2020/7916729
  19. Infrared Temperature Law and Deformation Monitoring of Layered Bedding Rock Slope under Static Load vol.2020, 2020, https://doi.org/10.1155/2020/8818278
  20. Failure Mechanism and Mitigation Measures of the G1002 Electricity Pylon Landslide at the Jinping I Hydropower Station vol.2020, 2020, https://doi.org/10.1155/2020/8820315
  21. Effect of Multiple Hole Distribution and Shape Based on Particle Flow on Rocklike Failure Characteristics and Mechanical Behavior vol.2020, 2020, https://doi.org/10.1155/2020/8822225
  22. Three-Dimensional Numerical Modeling and Roof Deformation Analysis of Yuanjue Cave Based on Point Cloud Data vol.2020, 2020, https://doi.org/10.1155/2020/8825015
  23. Study on the Large Deformation Characteristics and Disaster Mechanism of a Thin-Layer Soft-Rock Tunnel vol.2020, 2020, https://doi.org/10.1155/2020/8826337
  24. Three-Dimensional Physical Similarity Simulation of the Deformation and Failure of a Gas Extraction Surface Well in a Mining Area vol.2020, 2020, https://doi.org/10.1155/2020/8834199
  25. Inversion Method of Initial In Situ Stress Field Based on BP Neural Network and Applying Loads to Unit Body vol.2020, 2020, https://doi.org/10.1155/2020/8840940
  26. Study on the Stage Failure Mechanism and Stability Control of Surrounding Rock of Repeated Mining Roadway vol.2020, 2020, https://doi.org/10.1155/2020/8866559
  27. Study on the Rheological Failure Mechanism of Weakly Cemented Soft Rock Roadway during the Mining of Close-Distance Coal Seams: A Case Study vol.2020, 2020, https://doi.org/10.1155/2020/8885849
  28. Multiscale Laboratory Study and Numerical Analysis of Water-Weakening Effect on Shale vol.2020, 2020, https://doi.org/10.1155/2020/5263431
  29. Experimental study on the effect of fly ash content in cemented paste backfill on its anti-sulfate erosion vol.17, pp.12, 2020, https://doi.org/10.1080/15435075.2020.1791877
  30. Dynamic disaster control of backfill mining under thick magmatic rock in one side goaf: A case study vol.27, pp.10, 2020, https://doi.org/10.1007/s11771-020-4532-6
  31. Experimental Investigation of the Effects of the Gangue Particle Size on the Evolution Rules of Key Seepage Parameters vol.2021, 2021, https://doi.org/10.1155/2021/4410254
  32. Effects of interface angles on properties of rock-cemented coal gangue-fly ash backfill bi-materials vol.24, pp.1, 2021, https://doi.org/10.12989/gae.2021.24.1.081
  33. Study on Mining Pressure Law and Pressure Relief Control under Influence of Key Layer vol.38, pp.5, 2020, https://doi.org/10.1007/s42461-021-00465-0