Steel and Composite Structures

  • 제35권1호
  • /
  • Pages.13-27
  • /
  • 2020
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Stress-strain model of weak PVC-FRP confined concrete column and strong RC ring beam joint under eccentric compression

  • Yu, Feng (Department of Civil engineering and Anhui University of Technology) ;
  • Zhang, Nannan (Department of Civil engineering and Anhui University of Technology) ;
  • Fang, Yuan (Department of Civil engineering and Anhui University of Technology) ;
  • Liu, Jie (Department of Civil engineering and Anhui University of Technology) ;
  • Xiang, Guosheng (Department of Civil engineering and Anhui University of Technology)
  • 투고 : 2019.09.24
  • 심사 : 2020.01.04
  • 발행 : 2020.04.10
⟨ 이전 논문 다음 논문 ⟩

초록

To investigate the stress-strain relation of PVC-FRP Confined Concrete (PFCC) column with RC ring beam joint subjected to eccentric compression, the experiment of 13 joint specimens, which were designed with principle of "strong joint and weak column", were presented. Several variable parameters, such as reinforcement ratio, width and height of ring beam, FRP strips spacing and eccentricity, were considered. The specimens were eventually damaged by the crushing of concrete, the fracture of PVC tube and several FRP strips. With the FRP strips spacing or eccentricity increased, the ultimate carrying capacity of specimens declined. The strain of FRP strips and axial strain of PVC tube decreased as FRP strips spacing decreased. The decrease of eccentricity would slow down the development of strain of FRP strips and axial strain of PVC tube. The slope of stress-strain curve of PFCC column decreased as FRP strips spacing or eccentricity increased. The ultimate strain of PFCC column reduced as FRP strips spacing increased, while the effect of eccentricity on the ultimate strain of PFCC was not distinct. Considering the influence of eccentricity on the stress-strain relation, a modified stress-strain model for conveniently predicting the weak PFCC column and strong RC ring beam joint under eccentric compression was proposed and it was in good agreement with the experimental data.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Ministry of Housing and Urban-Rural Development

This research was supported by National Natural Science Foundation of China (Nos. 51878002, 51578001, 51608003 and 51008001), Ministry of Housing and UrbanRural Development (No.2012-K2-7), Key Research and Development Plan of Anhui Province (No.1704a0802131), and the Outstanding Young Talent Support Program of Anhui Province (No. gxyqZD2016072).

참고문헌

  1. Abdelkarim, O.I., ElGawady, M.A., Anumolu, S., Gheni, A. and Sanders, G.E. (2017), "Behavior of hollow-core FRP - concrete-steel columns under static cyclic flexural loading", J. Struct. Eng. - ASCE, 144(2), 04017188. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001905.
  2. Attari, B. and Tavakkolizadeh, M. (2019), "An experimental investigation on effect of elevated temperatures on bond strength between externally bonded CFRP and concrete", Steel Compos. Struct., 32 (5), 559-569. https://doi.org/10.12989/scs.2019.32.5.559.
  3. Chen, B.L. and Wang, L.G. (2019), "Experimental study on flexural behavior of splicing concrete-filled GFRP tubular composite members connected with steel bars", Steel Compos. Struct., 18 (5), 1129-1144. https://doi.org/10.12989/scs.scs.2015.18.5.1129.
  4. Chen, J.F. and Teng, J.G. (2001), "Anchorage Strength Models for FRP and Steel Plates Bonded to Concrete", J. Struct. Eng.- ASCE, 127(7), 784-791. https://doi.org/10.1061/(ASCE)07339445(2001)127:7(784).
  5. Dhahir, M.K. (2017), "Shear strength of FRP reinforced deep beams without web reinforcement", Compos. Struct., 165, 223-232. https://doi.org/10.1016/j.compstruct.2017.01.039.
  6. Fakharifar, M. and Chen, G. (2016), "Compressive behavior of FRP-confined concrete-filled PVC tubular columns", Compos. Struct., 141, 91-109. https://doi.org/10.1016/j.compstruct.2016.01.004.
  7. Fakharifar, M. and Chen, G. (2017), "FRP-confined concrete filled PVC tubes: A new design concept for ductile column construction in seismic regions", Constr. Build. Mater., 130, 1-10. https://doi.org/10.1016/j.conbuildmat.2016.11.056.
  8. GB/T228.1 (2010), "Metallic materials - Tensile testing- Part 1: Method of test at room temperature", China.
  9. GB/T3354 (2014), "Test method for tensile properties of orientational fiber reinforced polymer matrix materials", China.
  10. GB/T50081 (2002), "Standard for test method of mechanical properties on ordinary the concrete strength of the concrete", China.
  11. GB/T8804.1 (2003), "Thermoplastic pipes-Determination of tensile properties", China.
  12. Gholampour, A. and Ozbakkaloglu, T. (2017), "Finite Element Analysis of Constitutive Behavior of FRP-Confined Steel Fiber Reinforced Concrete." Key Eng Mater, 737, 511-516. https://doi.org/10.4028/www.scientific.net/KEM.737.511
  13. Grammatikou, S., Biskinis, D. and Fardis, M.N. (2018), "Effect of load cycling, FRP jackets, and lap-splicing of longitudinal bars on the effective stiffness and ultimate deformation of flexure-controlled RC members", J. Struct. Eng. - ASCE, 144(6), 04018056. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002045
  14. Gupta, P.K. and Verma, V.K. (2016), "Study of concrete-filled unplasticized poly-vinyl chloride tubes in marine environment." Proceedings of the Ins of Mech Eng Part M-J Eng for the Marit Envir, 230(2), 229-240. https://doi.org/10.1177/1475090214560448.
  15. Harajli, M.H. (2006), "Axial stress-strain relationship for FRP confined circular and rectangular concrete columns", Cement Concrete Compos., 28(10), 938-948. https://doi.org/10.1016/j.cemconcomp.2006.07.005.
  16. Jiang, S.F., Ma, S.L. and Zhao, Q.W. (2014), "Experimental study and theoretical analysis on slender concrete-filled FRP - PVC tubular columns", Constr. Build. Mater., 53(2), 475-487. https://doi.org/10.1016/j.conbuildmat.2013.11.089.
  17. Jiang, S.F. and Ma, S.L. (2014), "Experimental study on hysteretic behavior of circular section reinforced concrete composite columns with FRP-PVC tube", J. Build. Struct., 35(2), 111-118. https://doi.org/10.15951/j.tmgcxb.2014.01.013.
  18. Kurt, C.E. (1978), "Concrete-filled structure plastic columns", J. Struct. Div., 104(1), 55-63. https://doi.org/10.1061/JSDEAG.0004849
  19. Mansouri, I. and Kisi, O. (2015), "Prediction of debonding strength for masonry elements retrofitted with FRP composites using neuro fuzzy and neural network approaches", Compos. Part B: Eng., 70(5), 247-255. https://doi.org/10.1016/j.compositesb.2014.11.023
  20. Mansouri, I. Ozbakkaloglu, T. Kisi, O. and Xie, T. (2016), "Predicting behavior of FRP-confined concrete using neuro fuzzy, neural network, multivariate adaptive regression splines and M5 model tree techniques", Mater. Struct., 49(10), 4319-4334. https://doi.org/10.1617/s11527-015-0790-4.
  21. Niu, D.T., Yu, F. and Wang, Z.W. (2017), "Eccentric compression performance of PVC-CFRP confined reinforced steel tube concrete column", Acta Mater. Compos. Sinica, 34(10), 2356-2366. https://doi.org/10.13801/j.cnki.fhclxb.20170222.002.
  22. Ozbakkaloglu, T. and Lim, J.C. (2013), "Axial compressive behavior of FRP-confined concrete: Experimental test database and a new design-oriented model", Compos. Part B: Eng., 55(12), 607-634. https://doi.org/10.1016/j.compositesb.2013.07.025..
  23. Ozbakkaloglu, T., Lim, J.C. and Vincent, T. (2013), "FRP-confined concrete in circular sections: Review and assessment of stress-strain models", Eng. Struct., 49(4), 1068-1088. https://doi.org/10.1016/j.engstruct.2012.06.010.
  24. Prashob, P.S. Shashikala, A.P. and Somasundaran, T.P. (2019), "Characteristics of CFRP strengthened tubular joints subjected to different monotonic loadings", Steel Compos. Struct.,32(3), 361-372. https://doi.org/10.12989/scs.2019.32.3.361.
  25. Saafi, M. (2001), "Development and behavior of a new hybrid column in infrastructure systems", Texas: Doctoral Dissertation of the University of Alabama.
  26. Teng, J.G. Jiang, T. and Lam L. (2009), "Refinement of a design-oriented stress-strain model for FRP-confined concrete", J. Compos. Constr., 13(4), 269-278. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000012.
  27. Toutanji, H. and Saafi, M. (2001), "Durability studies on concrete columns encased in PVC-FRP composite tubes", Compos. Struct., 54(1), 27-35. https://doi.org/10.1016/S0263-8223(01)00067-8.
  28. Toutanji, H. and Saafi, M. (2002), "Stress-strain behavior of concrete columns confined with hybrid composite materials", Mater. Struct., 35(6), 338-347. https://doi.org/10.1007/BF02483153.
  29. Wang, Z.W. (2008), "Study on Mechanical Properties of Axial Compression PVC-FRP tube Concrete Short Column", Xi'an: Xi'an University of Architecture and Technology.
  30. Wei, Y.Y. and Wu, Y.F. (2012), "Unified stress-strain model of concrete for FRP-confined columns", Constr. Build. Mater., 26(1), 381-392. https://doi.org/10.1016/j.conbuildmat.2011.06.037.
  31. Xie, Q., Sinaei, H., Shariati, M., Khorami, M., Mohamad, E.T. and Bui, D.T. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel Compos. Struct., 30(5), 433-441. https://doi.org/10.12989/scs.scs.2019.30.5.433.
  32. Yu, F. Xu, G.S. and Cheng, A.C. (2016), "Analysis of shear bearing capacity of reinforced concrete columns with pvc-cfrp tubes under low cyclic loading", J. Build. Struct., 37(11), 106-112. https://doi.org/10.14006/j.jzjgxb.2016.11.014.
  33. Yu, F. Cheng, A.C. Xu, G.S. and Li, D.G. (2015), "Nonlinear finite element analysis of PVC-FRP confined concrete short column under axial compression", Indust. Constr., 45(4), 77-82.
  34. Yu, F. (2007), "Experimental study and theoretical analysis of mechanical properties of PVC-FRP confined concrete columns." Xi'an: Xi'an University of Architecture and Technology.
  35. Yu, F. and Niu D.T. (2010), "Stress-strain model of PVC-FRP confined concrete column subjected to axial compression." Int. J. Phys. Sci., 5(15), 2304-2309. http://www.academicjournals.org/IJPS.
  36. Yu, F., Li, D.A., Niu, D.T., Zhu, D.F., Kong, Z.Y., Zhang, N.N. and Fang, Y. (2019), "A model for ultimate bearing capacity of PVC-FRP confined concrete column with reinforced concrete beam joint under axial compression", Constr. Build. Mater., 214, 668-676. https://doi.org/10.1016/j.conbuildmat.2019.04.131.
  37. Yu, F., Xu, G.S., Niu, D.T., Cheng, A.C., Wu, P. and Kong, Z.Y. (2018), "Experimental study on PVC-FRP confined concrete columns under low cyclic loading", Constr. Build. Mater., 177(20), 287-302. https://doi.org/10.1016/j.conbuildmat.2018.05.111.
  38. Yu, F., Zhang, N.N., Niu, D.T., Kong, Z.Y., Zhu, D.F., Wang, S.L. and Fang, Y. (2019), "Strain analysis of PVC-FRP confined concrete column with ring beam joint under axial compression", Compos. Struct., 224, 1-14. https://doi.org/10.1016/j.compstruct.2019.111012.
  39. Zhu, D.F. (2018), "Study on axial compression performance of PVC-FRP confined concrete column-reinforced concrete beam joint", Ma'anshan: Anhui University of Technology.

피인용 문헌

  1. Experimental study on low-strength concrete joint core strengthened with steel meshes for connecting PFCC column and RC beam vol.24, pp.4, 2021, https://doi.org/10.1177/1369433220969028