Advances in nano research

  • 제8권1호
  • /
  • Pages.83-94
  • /
  • 2020
  • /
  • 2287-237X(pISSN)
  • /
  • 2287-2388(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Thermal buckling analysis of magneto-electro-elastic porous FG beam in thermal environment

  • Ebrahimi, Farzad (Department of Mechanical Engineering, Faculty of Engineering, Imam Khomeini International University) ;
  • Jafari, Ali (Department of Mechanical Engineering, Faculty of Engineering, Imam Khomeini International University) ;
  • Selvamani, Rajendran (Department of mathematics, Karunya Institute of Technology and Sciences)
  • 투고 : 2019.04.25
  • 심사 : 2019.10.27
  • 발행 : 2020.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

An analytical formulation and solution process for the buckling analysis of porous magneto-electro-elastic functionally graded (MEE-FG) beam via different thermal loadings and various boundary conditions is suggested in this paper. Magneto electro mechanical coupling properties of FGM beam are taken to vary via the thickness direction of beam. The rule of power-law is changed to consider inclusion of porosity according to even and uneven distribution. Pores possibly occur inside FGMs due the result of technical problems that lead to creation of micro-voids in these materials. Change in pores along the thickness direction stimulates the mechanical and physical properties. Four-variable tangential-exponential refined theory is employed to derive the governing equations and boundary conditions of porous FGM beam under magneto-electrical field via Hamilton's principle. An analytical model procedure is adopted to achieve the non-dimensional buckling load of porous FG beam exposed to magneto-electrical field with various boundary conditions. In order to evaluate the influence of thermal loadings, material graduation exponent, coefficient of porosity, porosity distribution, magnetic potential, electric voltage and boundary conditions on the critical buckling temperature of the beam made of magneto electro elastic FG materials with porosities a parametric study is presented. It is concluded that these parameters play remarkable roles on the buckling behavior of porous MEE-FG beam. The results for simpler states are proved for exactness with known data in the literature. The proposed numerical results can serve as benchmarks for future analyses of MEE-FG beam with porosity phases.

키워드

참고문헌

  1. Atmane, H.A., Tounsi, A. and Bernard, F. (2015), "Effect of thickness stretching and porosity on mechanical response of a functionally graded beams resting on elastic foundations", Int. J. Mech. Mater. Des., 13(1), 71-84. https://doi.org/10.1007/s10999-015-9318-x
  2. Barati, M.R., Zenkour, A.M. and Shahverdi, H. (2016), "Thermomechanical buckling analysis of embedded nanosize FG plates in thermal environments via an inverse cotangential theory", Compos. Struct., 141, 203-212. https://doi.org/10.1016/j.compstruct.2016.01.056
  3. Boutahar, L. and Benamar, R. (2016), "A homogenization procedure for geometrically non-linear free vibration analysis of functionally graded annular plates with porosities, resting on elastic foundations", Ain Shams Eng. J., 7(1), 313-333. https://doi.org/10.1016/j.asej.2015.11.016
  4. Ebrahimi, F. and Barati, M.R. (2016a), "A nonlocal higher-order refined magneto-electro-viscoelastic beam model for dynamic analysis of smart nanostructures", Int. J. Eng. Sci., 107, 183-196. https://doi.org/10.1016/j.ijengsci.2016.08.001
  5. Ebrahimi, F. and Barati, M.R. (2016b), "Vibration analysis of nonlocal beams made of functionally graded material in thermal environment", Eur. Phys. J. Plus, 131(8), 279. https://doi.org/10.1140/epjp/i2016-16279-y
  6. Ebrahimi, F. and Hashemi, M. (2015), "On vibration behavior of rotating functionally graded double-tapered beam with the effect of porosities", Proceedings of the Institution of Mechanical Engineers, Part G: J. Aerosp. Eng., 0954410015619647. https://doi.org/10.1177/0954410015619647
  7. Ebrahimi, F. and Jafari, A. (2016a), "A higher-order thermomechanical vibration analysis of temperature-dependent FGM beams with porosities", J. Eng., 2016, 9561504. https://doi.org/10.1155/2016/9561504
  8. Ebrahimi, F. and Jafari, A. (2016b), "Thermo-mechanical vibration analysis of temperature-dependent porous FG beams based on Timoshenko beam theory", Struct. Eng. Mech., Int. J., 59(2), 343-371. https://doi.org/10.12989/sem.2016.59.2.343
  9. Ebrahimi, F. and Mokhtari, M. (2015), "Transverse vibration analysis of rotating porous beam with functionally graded microstructure using the differential transform method", J. Brazil. Soc. Mech. Sci. Eng., 37(4), 1435-1444. https://doi.org/10.1007/s40430-014-0255-7
  10. Ebrahimi, F. and Zia, M. (2015), "Large amplitude nonlinear vibration analysis of functionally graded Timoshenko beams with porosities", Acta Astronautica, 116, 117-125. https://doi.org/10.1016/j.actaastro.2015.06.014
  11. Ebrahimi, F., Ghasemi, F. and Salari, E. (2016), "Investigating thermal effects on vibration behavior of temperature-dependent compositionally graded Euler beams with porosities", Meccanica, 51(1), 223-249. https://doi.org/10.1007/s11012-015-0208-y
  12. Henderson, J.P., Plummer, A. and Johnston, N. (2018), "An electro-hydrostatic actuator for hybrid active-passive vibration isolation", Int. J. Hydromechatron., 1(1), 47-71. https://doi.org/10.1504/IJHM.2018.090305
  13. Jiang, A. and Ding, H. (2004), "Analytical solutions to magnetoelectro-elastic beams", Struct. Eng. Mech., Int. J., 18(2), 195-209. https://doi.org/10.12989/sem.2004.18.2.195
  14. Kadoli, R., Akhtar, K. and Ganesan, N. (2008), "Static analysis of functionally graded beams using higher order shear deformation theory", Appl. Mathe. Model., 32(12), 2509-2525. https://doi.org/10.1016/j.apm.2007.09.015
  15. Kant, T. and Swaminathan, K. (2000), "Analytical solutions using a higher order refined theory for the stability analysis of laminated composite and sandwich plates", Struct. Eng. Mech., Int. J., 10(4), 337-357. https://doi.org/10.12989/sem.2000.10.4.337
  16. Kattimani, S. and Ray, M. (2015), "Control of geometrically nonlinear vibrations of functionally graded magneto-electroelastic plates", Int. J. Mech. Sci., 99, 154-167. https://doi.org/10.1016/j.ijmecsci.2015.05.012
  17. Ke, L.-L. and Wang, Y.-S. (2014), "Free vibration of sizedependent magneto-electro-elastic nanobeams based on the nonlocal theory", Physica E: Low-dimens. Syst. Nanostruct., 63, 52-61. https://doi.org/10.1016/j.physe.2014.05.002
  18. Ke, L.-L., Yang, J., Kitipornchai, S. and Bradford, M.A. (2012), "Bending, buckling and vibration of size-dependent functionally graded annular microplates", Compos. Struct., 94(11), 3250-3257. https://doi.org/10.1016/j.compstruct.2012.04.037
  19. Khor, K. and Gu, Y. (2000), "Effects of residual stress on the performance of plasma sprayed functionally graded $ZrO_{2}$/NiCoCrAlY coatings", Mater. Sci. Eng.: A, 277(1), 64-76. https://doi.org/10.1016/S0921-5093(99)00565-1
  20. Kiani, Y. and Eslami, M. (2013), "An exact solution for thermal buckling of annular FGM plates on an elastic medium", Compos. Part B: Eng., 45(1), 101-110. https://doi.org/10.1016/j.compositesb.2012.09.034
  21. Larbi, L.O., Kaci, A., Houari, M.S.A. and Tounsi, A. (2013), "An Efficient Shear Deformation Beam Theory Based on Neutral Surface Position for Bending and Free Vibration of Functionally Graded Beams#", Mech. Based Des. Struct. Mach., 41(4), 421-433. https://doi.org/10.1080/15397734.2013.763713
  22. Liew, K., Yang, J. and Kitipornchai, S. (2004), "Thermal postbuckling of laminated plates comprising functionally graded materials with temperature-dependent properties", J. Appl. Mech., 71(6), 839-850. https://doi.org/10.1115/1.1795220
  23. Lu, C.-F. and Chen, W. (2005), "Free vibration of orthotropic functionally graded beams with various end conditions", Struct. Eng. Mech., Int. J., 20(4), 465-476. https://doi.org/10.12989/sem.2005.20.4.465
  24. Mantari, J., Bonilla, E. and Soares, C.G. (2014), "A new tangential-exponential higher order shear deformation theory for advanced composite plates", Compos. Part B: Eng., 60, 319-328. https://doi.org/10.1016/j.compositesb.2013.12.001
  25. Mechab, I., Mechab, B., Benaissa, S., Serier, B. and Bouiadjra, B.B. (2016), "Free vibration analysis of FGM nanoplate with porosities resting on Winkler Pasternak elastic foundations based on two-variable refined plate theories", J. Brazil. Soc. Mech. Sci. Eng., 38(8), 2193-2211. https://doi.org/10.1007/s40430-015-0482-6
  26. Peng, X., Yan, M. and Shi, W. (2007), "A new approach for the preparation of functionally graded materials via slip casting in a gradient magnetic field", Scripta Materialia, 56(10), 907-909. https://doi.org/10.1016/j.scriptamat.2006.12.020
  27. Rezaei, A. and Saidi, A. (2016), "Application of Carrera Unified Formulation to study the effect of porosity on natural frequencies of thick porous-cellular plates", Compos. Part B: Eng., 91, 361-370. https://doi.org/10.1016/j.compositesb.2015.12.050
  28. Seifried, S., Winterer, M. and Hahn, H. (2001), "Nanocrystalline gradient films through chemical vapor synthesis", Scripta Materialia, 44(8), 2165-2168. https://doi.org/10.1016/S1359-6462(01)00898-3
  29. Simsek, M. and Yurtcu, H. (2013), "Analytical solutions for bending and buckling of functionally graded nanobeams based on the nonlocal Timoshenko beam theory", Compos. Struct., 97, 378-386. https://doi.org/10.1016/j.compstruct.2012.10.038
  30. Sladek, J., Sladek, V., Krahulec, S., Chen, C. and Young, D. (2015), "Analyses of circular magnetoelectroelastic plates with functionally graded material properties", Mech. Adv. Mater. Struct., 22(6), 479-489. https://doi.org/10.1080/15376494.2013.807448
  31. Sobhy, M. (2013), "Buckling and free vibration of exponentially graded sandwich plates resting on elastic foundations under various boundary conditions", Compos. Struct., 99, 76-87. https://doi.org/10.1016/j.compstruct.2012.11.018
  32. Song, C., Xu, Z. and Li, J. (2007), "Structure of in situ Al/Si functionally graded materials by electromagnetic separation method", Mater. Des., 28(3), 1012-1015. https://doi.org/10.1016/j.matdes.2005.11.007
  33. Tahouneh, V. (2014), "Free vibration analysis of bidirectional functionally graded annular plates resting on elastic foundations using differential quadrature method", Struct. Eng. Mech., Int. J., 52(4), 663-686. https://doi.org/10.12989/sem.2014.52.4.663
  34. Tanaka, Y. (2018), "Active vibration compensator on moving vessel by hydraulic parallel mechanism", Int. J. Hydromechatron., 1(3), 350-359. https://doi.org/10.1504/IJHM.2018.094887
  35. Vo, T.P., Thai, H.-T., Nguyen, T.-K. and Inam, F. (2014), "Static and vibration analysis of functionally graded beams using refined shear deformation theory", Meccanica, 49(1), 155-168. https://doi.org/10.1007/s11012-013-9780-1
  36. Vo, T.P., Thai, H.-T., Nguyen, T.-K., Inam, F. and Lee, J. (2015), "A quasi-3D theory for vibration and buckling of functionally graded sandwich beams", Compos. Struct., 119, 1-12. https://doi.org/10.1016/j.compstruct.2014.08.006
  37. Wang, Z., Xie, Z. and Huang, W. (2018), "A pin-moment model of flexoelectric actuators", Int. J. Hydromechatron., 1(1), 72-90. https://doi.org/10.1504/IJHM.2018.090306
  38. Watanabe, Y., Eryu, H. and Matsuura, K. (2001), "Evaluation of three-dimensional orientation of Al3Ti platelet in Al-based functionally graded materials fabricated by a centrifugal casting technique", Acta Materialia, 49(5), 775-783. https://doi.org/10.1016/S1359-6454(00)00384-0
  39. Wattanasakulpong, N. and Ungbhakorn, V. (2014), "Linear and nonlinear vibration analysis of elastically restrained ends FGM beams with porosities", Aerosp. Sci. Technol., 32(1), 111-120. https://doi.org/10.1016/j.ast.2013.12.002
  40. Wattanasakulpong, N., Prusty, B.G., Kelly, D.W. and Hoffman, M. (2012), "Free vibration analysis of layered functionally graded beams with experimental validation", Mater. Des., 36, 182-190. https://doi.org/10.1016/j.matdes.2011.10.049
  41. Xin, L. and Hu, Z. (2015), "Free vibration of layered magnetoelectro-elastic beams by SS-DSC approach", Compos. Struct., 125, 96-103. https://doi.org/10.1016/j.compstruct.2015.01.048
  42. Yahia, S.A., Atmane, H.A., Houari, M.S.A. and Tounsi, A. (2015), "Wave propagation in functionally graded plates with porosities using various higher-order shear deformation plate theories", Struct. Eng. Mech., Int. J., 53(6), 1143-1165. https://doi.org/10.12989/sem.2015.53.6.1143
  43. Yang, J., Liew, K. and Kitipornchai, S. (2006), "Imperfection sensitivity of the post-buckling behavior of higher-order shear deformable functionally graded plates", Int. J. Solids Struct., 43(17), 5247-5266. https://doi.org/10.1016/j.ijsolstr.2005.06.061
  44. Zhu, J., Lai, Z., Yin, Z., Jeon, J. and Lee, S. (2001), "Fabrication of $ZrO_{2}$-NiCr functionally graded material by powder metallurgy", Mater. Chem. Phys., 68(1), 130-135. https://doi.org/10.1016/S0254-0584(00)00355-2

피인용 문헌

  1. Influence of axial load function and optimization on static stability of sandwich functionally graded beams with porous core vol.36, pp.4, 2020, https://doi.org/10.1007/s00366-020-01023-w
  2. Frequency and thermal buckling information of laminated composite doubly curved open nanoshell vol.10, pp.1, 2020, https://doi.org/10.12989/anr.2021.10.1.001
  3. Vibration of multilayered functionally graded deep beams under thermal load vol.24, pp.6, 2020, https://doi.org/10.12989/gae.2021.24.6.545
  4. Computer simulation for stability performance of sandwich annular system via adaptive tuned deep learning neural network optimization vol.11, pp.1, 2021, https://doi.org/10.12989/anr.2021.11.1.083
  5. Computer modeling for frequency performance of viscoelastic magneto-electro-elastic annular micro/nanosystem via adaptive tuned deep learning neural network optimization vol.11, pp.2, 2020, https://doi.org/10.12989/anr.2021.11.2.203