Advances in concrete construction

  • 제9권3호
  • /
  • Pages.267-278
  • /
  • 2020
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of magnesium sulphate solution on compressive strength and sorptivity of blended concrete

  • Jena, Trilochan (Department of Civil Engineering, ITER, S'O'A (Deemed to be University)) ;
  • Panda, Kishor C. (Department of Civil Engineering, GCEK)
  • 투고 : 2019.06.11
  • 심사 : 2020.02.02
  • 발행 : 2020.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper reports on the result of an experimental investigation carried out to study the compressive strength and sorptivity properties of blended cement concrete exposed to 5% and 10% MgSO4 solution using fly ash (FA) and silpozz. Usually in sulphate environment the minimum grade of concrete is M30 and the mix design is done for target mean strength of 39 MPa. Silpozz is manufactured by burning of agro-waste rice husk in designed furnace in between 600° to 700℃ which is one of the main agricultural residues obtained from the outer covering of rice grains during the milling process. There are four mix series taken with control mix. The control mix made 0% replacement of FA and silpozz with Ordinary Portland Cement (OPC). The first mix series made 0% FA and 10-30% replacement of silpozz with OPC. The second mix series made with 10% FA and 10-40% replacement of silpozz with OPC. The third mix series made 20% FA and 10-30% replacement of silpozz with OPC and the fourth mix series made 30% FA and 10-20% silpozz replaced with OPC. The samples (cubes) are prepared and cured in normal water and 5% and 10% MgSO4 solution for 7, 28 and 90 days. The studied parameters are compressive strength and strength deterioration factor (SDF) for 7, 28 and 90 days. The water absorption and sorptivity tests have been done after 28 days of normal water and magnesium sulphate solution curing. The investigation reflects that the blended cement concrete incorporating FA and silpozz showing better resistance against MgSO4 solution when compared to normal water curing (NWC) samples.

키워드

과제정보

The authors gratefully acknowledged the director IMMT for XRD and SEM testing of samples and thanks S 'O' A University, ITER for giving support to conduct the experimental work as well as thanks to Cera-Chem Private Ltd., Chennai, for supplying high end SP.

참고문헌

  1. Aburawi, M. and Swamy, R.N. (2008), "Influence of salt weathering on the properties of concrete", Arab. J. Sci. Eng., 33, 105-115.
  2. ACI 201.2R-01, Guide to Durable Concrete, Reported by ACI Committee 201.
  3. ACI Committee 116 (2000), Cement and Concrete Terminology, ACI 116R-00, ACI Manual of Concrete Practice, Detroit, MI.
  4. Aghabaglou, M.A., Kalipcilar, I., Sezer, I.G., Sezer, A. and Altun, S. (2015), "Freeze-thaw resistance and chloride-ion penetration of cement-stabilized clay exposed to sulfate attack", Appl. Clay Sci., 115, 179-188. https://doi.org/10.1016/j.clay.2015.07.041.
  5. Agrawal, B.M. (1989), "Utilization of rice husk ash", Glass Ceram. Bull., 36, 1-2.
  6. Antiohos, S., Maganari, K.T. and Sima, S. (2005), "Evaluation of blends of high and low calcium fly ashes for use as supplementary cementing materials", Cement Concrete Compos., 27(3), 349-356. https://doi.org/10.1016/j.cemconcomp.2004.05.001.
  7. Anwar, M. and Khalil, E.A.B. (2015), "Carbonation of ternary cementitious concrete systems containing fly ash and silica fume", Water Sci. J., 29, 36-44. https://doi.org/10.1016/j.wsj.2014.12.001.
  8. Anwar, M. and Roushdi, M. (2014), "Improved concrete properties to resist the saline water using environmental by-product", Water Sci. J., 27, 30-38. https://doi.org/10.1016/j.wsj.2013.12.003.
  9. Anwar, M., Roushdi, M. and Mustafa, H. (2013), "Investigating the usage of environmental by-product materials in concrete for sustainable development", Aust. J. Basic Appl. Sci., 7, 132-139.
  10. ASTM C 1585-04, Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic Cement Concretes.
  11. Berry, E.E. (1980), "Strength development of some blended cement mortars", Cement Concrete Res., 10, 1-11. https://doi.org/10.1016/0008-8846(80)90046-0.
  12. Bouzoubaa, A.N., Zhang, M.H. and Malhotra, V.M. (2000), "Laboratory-produced high-volume fly ash blended cements compressive strength and resistance to the chloride-ion penetration of concrete", Cement Concrete Res., 30, 1037-1046. https://doi.org/10.1016/S0008-8846(00)00299-4.
  13. Hossack, A.M. and Thomas, M.D.A. (2016), "Evaluation of the effect of tricalcium aluminate content on the severity of sulfate attack in Portland cement and Portland limestone cement", Cement Concrete Compos., 56, 115-120. https://doi.org/10.1016/j.cemconcomp.2014.10.005.
  14. IS: 10262:2009, Concrete Mix Proportioning-Guidelines, Bureau of Indian Standards, New Delhi, India.
  15. IS: 383-1970, Indian Standard Specification for Coarse and Fine aggregates from Natural Sources for Concrete, Second Revision, Bureau of Indian Standards, New Delhi, India.
  16. IS: 516-1959, Methods of Tests for Strength of Concrete, Bureau of Indian Standards, New Delhi, India.
  17. IS: 8112:1989, Indian Standard, 43 Grade Ordinary Portland cement Specification, First Revision, Bureau of Indian Standards, New Delhi, India.
  18. Jena, T. and Panda, K.C. (2015), "Influence of sea water on strength and durability properties of concrete", Adv. Struct. Eng., 3, 1863-1873. https://doi.org/10.1007/978-81-322-2187-6_143.
  19. Jena, T. and Panda, K.C. (2017), "Compressive strength and carbonation of sea water cured blended concrete", Int. J. Civil Eng. Technol., 8(2), 153-162.
  20. Jena, T. and Panda, K.C. (2017), "Usage of fly ash and silpozz on strength and surptivity of marine concrete", Int. J. Appl. Eng. Res., 12(16), 5768-5780.
  21. Jena, T. and Panda, K.C. (2018), "Mechanical and durability properties of marine concrete using fly ash and silpozz", Adv. Concrete Constr., 6(1), 47-68. https://doi.org/10.12989/acc.2018.6.1.047.
  22. Jena, T. and Panda, K.C. (2018), "Strength and sorptivity of concrete using fly ash and silpozz in marine concrete", J. Eng. Sci. Technol., 13(12), 4310-4325.
  23. Jena, T. and Panda, K.C. (2019), "Study on strength reduction factor of blended concrete exposed to sea water", Recent Adv. Struct. Eng., 1, 787-801. https://doi.org/10.1007/978-981-13-0362-3_64.
  24. Lane, D.S. and Ozyildirim, C. (1999), "Combinations of pozzolans and ground, granulated, blast furnace slag for durable hydraulic cement concrete", Final Report, Virginia Department of Transportation, University of Virginia, Charlottesville, Virginia, USA.
  25. Mahmud, H. (2010), "Absorption and permeability performance of Selangor rice husk ash blended grade 30 Concrete", J. Eng. Sci. Technol., 5, 1-16.
  26. Mehta, P.K. (2004), "High-performance, high-volume fly ash concrete for sustainable development", Proceeding of the International Workshop on Sustainable Development and Concrete Technology, Beijing.
  27. Mirvalad, S. and Noken, M. (2016), "Minimum SCM requirements in mixture containing limestone cement to control thaumasite sulfate attack", Constr. Build. Mater., 84, 19-29. https://doi.org/10.1016/j.conbuildmat.2015.02.074.
  28. Nehdi, M. (2001), "Ternary and quaternary cements for sustainable development", Concrete Int., 23, 35-42.
  29. Oh, B.H., Cha, S.W., Jang, B.S. and Jang, S.Y. (2002), "Development of high-performance concrete having high resistance to chloride Penetration", Nucl. Eng. Des., 212, 221-231. https://doi.org/10.1016/S0029-5493(01)00484-8.
  30. Panda, K.C. and Prusty, S.D. (2015), "Influence of silpozz and rice husk ash on enhancement of concrete strength", Adv. Concrete Constr., 3(3), 203-221. https://doi.org/10.12989/acc.2015.3.3.203.
  31. Popovics, S. (1993), "Portland cement-fly ash-silica fume system in concrete", Adv. Cement Bas. Mater., 1(2), 83-91. https://doi.org/10.1016/1065-7355(93)90013-E.
  32. Shannag, M.J. (2000), "High strength concrete containing natural pozollana and silica fume", Cement Concrete Compos., 22, 399-406. https://doi.org/10.1016/S0958-9465(00)00037-8.
  33. Sunil, K. (2009), "Influence of water quality on the strength of plain and blended cement concretes in marine environments", Cement Concrete Res., 30, 345-350. https://doi.org/10.1016/S0008-8846(99)00263-X.
  34. Thomas, M.D.A., Shehata M.H., Shashi prakash, S.G., Hopkins, D.S. and Cail, K. (1999), "Use of ternary cementitious systems containing silica fume and fly ash in concrete", Cement Concrete Res., 29(8), 1207-1214. https://doi.org/10.1016/S0008-8846(99)00096-4.
  35. Uchikawa, H. and Okamura, T. (1993), Binary and Ternary Components Blended Cement, Ed. Sarkar, S.L., Mineral Additives in Cement and ABI Books Private, New India,
  36. Wegian, M.F. (2010), "Effect of sea water for mixing and curing on structural concrete", IES J. Part A. Civil Struct. Eng., 3(4), 235-243. https://doi.org/10.1080/19373260.2010.521048.
  37. Wei, S., Yunsheng, Z., Sifeng, L. and Yanmei, Z. (2004), "The influence of mineral admixtures on resistance to corrosion of steel bars in green high performance concrete", Cement Concrete Res., 34(10), 1781-1785. https://doi.org/10.1016/j.cemconres.2004.01.008.