DOI QR코드

DOI QR Code

Experimental and numerical studies of precast connection under progressive collapse scenario

  • Joshi, Digesh D. (Civil Engineering Department, School of Engineering, Institute of Technology, Nirma University) ;
  • Patel, Paresh V. (Civil Engineering Department, School of Engineering, Institute of Technology, Nirma University) ;
  • Rangwala, Husain M. (Civil Engineering Department, School of Engineering, Institute of Technology, Nirma University) ;
  • Patoliya, Bhautik G. (Civil Engineering Department, School of Engineering, Institute of Technology, Nirma University)
  • 투고 : 2018.05.28
  • 심사 : 2020.01.18
  • 발행 : 2020.03.25

초록

Progressive collapse in a structure occurs when load bearing members are failed and the adjoining structural elements cannot resist the redistributed forces and fails subsequently, that leads to complete collapse of structure. Recently, construction using precast concrete technology is adopted increasingly because it offers many advantages like faster construction, less requirement of skilled labours at site, reduced formwork and scaffolding, massive production with reduced amount of construction waste, better quality and better surface finishing as compared to conventional reinforced concrete construction. Connections are the critical elements for any precast structure, because in past, major collapse of precast structure took place because of connection failure. In this study, behavior of four different precast wet connections with U shaped reinforcement bars provided at different locations is evaluated. Reduced 1/3rd scale precast beam column assemblies having two span beam and three columns with removed middle column are constructed and examined by performing experiments. The response of precast connections is compared with monolithic connection, under column removal scenario. The connection region of test specimens are filled by cast-in-place micro concrete with and without polypropylene fibers. Performance of specimen is evaluated on the basis of ultimate load carrying capacity, maximum deflection at the location of removed middle column, crack formation and failure propagation. Further, Finite element (FE) analysis is carried out for validation of experimental studies and understanding the performance of structural components. Monolithic and precast beam column assemblies are modeled using non-linear Finite Element (FE) analysis based software ABAQUS. Actual experimental conditions are simulated using appropriate boundary and loading conditions. Finite Element simulation results in terms of load versus deflection are compared with that of experimental study. The nonlinear FE analysis results shows good agreement with experimental results.

키워드

과제정보

연구 과제 주관 기관 : Science & Engineering Research Board (SERB)

The authors gratefully acknowledge the financial support through research project number SB/S3/CEE/0028/2013, provided by Science & Engineering Research Board (SERB), Department of Science & Technology (DST), New Delhi, India.

참고문헌

  1. Al-Salloum, Y.A., Alrubaidi, M.A., Elsanadedy, H.M., Almusallam, T.H. and Iqbal, R.A. (2018), "Strengthening of precast RC beam-column connections for progressive collapse mitigation using bolted steel plates", Eng. Struct., 161, 146-160. https://doi.org/10.1016/j.engstruct.2018.02.009.
  2. ASCE/SEI 7-05 (2006), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers, Reston, VA, USA.
  3. Bao, Y., Main, J.A., Lew, H.S. and Sadek, F. (2017), "Performance of precast concrete moment frames subjected to column removal: Part 2, computational analysis", PCI J., 62(5), 53-74.
  4. BS: 8110-1 (1997), Structural Use of Concrete-Part 1: Code of Practice for Design and Construction, British Standards Institution, London, UK.
  5. Choi, H.K., Choi, Y.C. and Choi, C.S. (2013), "Development and testing of precast concrete beam-to-column connections", Eng. Struct., 56, 1820-1835. https://doi.org/10.1016/j.engstruct.2013.07.021.
  6. Dere, Y. (2016), "Assessing a retrofitting method for existing RC buildings with low seismic capacity in Turkey", J. Perform. Constr. Facil., 31(2), 040160981-17. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000969.
  7. Ehab, M., Salem, H. and Abdel-Mooty, M. (2016), "Progressive collapse assessment of precast concrete connections using the Applied Element Method (AEM)", Int. J. Comput. Meth. Exper. Measure., 4(3), 269-279. https://doi.org/10.2495/CMEM-V4-N3-269-279.
  8. Ellingwood, B.R., Smilowitz, R., Dusenberry, D.O., Duthinh, D., Lew, H.S. and Carino, N.J. (2007), "Best practices for reducing the potential for progressive collapse in buildings", Report No. NISTIR 7396, National Institute of Standards and Technology, Department of Commerce, USA.
  9. Elsanadedy, H.M., Almusallam, T.H., Al-Salloum, Y.A. and Abbas, H. (2017), "Investigation of precast RC beam-column assemblies under column-loss scenario", Constr. Build. Mater., 142, 552-571. https://doi.org/10.1016/j.conbuildmat.2017.03.120.
  10. GSA (2003), Progressive Collapse Analysis and Design Guidelines for New Federal Office Buildings and Major Modernization Projects, The U.S. General Services Administration, Washington, D.C., USA.
  11. GSA (2013), General Services Administration Alternate Path Analysis & Design Guidelines for Progressive Collapse Resistance, The U.S. General Services Administration, Washington, D.C., USA.
  12. Hu, H.T., Lin, F.M., Liu, H.T., Huang, Y.F. and Pan, T.C. (2010), "Constitutive modeling of reinforced concrete and prestressed concrete structures strengthened by fiber-reinforced plastics", Compos. Struct., 92(7), 1640-1650. https://doi.org/10.1016/j.compstruct.2009.11.030.
  13. IS: 10262 (2009), Concrete Mix Proportioning Guidelines, Bureau of Indian Standard, New Delhi, India.
  14. IS: 13920 (1993), Ductile Detailing of Reinforced Concrete Structures subjected to Seismic Forces-Code of Practice, Bureau of Indian Standard; New Delhi, India.
  15. IS: 1893 (Part-I) (2002), Criteria for Earthquake Resistant Design of Structures, Part 1: General Provisions and Buildings, Bureau of Indian Standards, New Delhi, India.
  16. IS: 456 (2000), Indian Standard Code of Practice for Plain and Reinforced Concrete, Bureau of Indian Standards, New Delhi, India.
  17. Joshi, D.D. and Patel, P.V. (2016), "Experimental assessment of dry precast beam column connections under progressive collapse scenario", J. Struct. Eng., 43(3), 258-269.
  18. Joshi, M.K., Murty, C.V.R and Jaisingh, M.P. (2005), "Cyclic behaviour of precast RC connections", Ind. Concrete J., 79, 43-50.
  19. Kang, S.B. and Tan, K.H. (2015), "Behaviour of precast concrete beam-column sub-assemblages subject to column removal", Eng. Struct., 93, 85-96. https://doi.org/10.1016/j.engstruct.2015.03.027.
  20. Kang, S.B. and Tan, K.H. (2016), "Robustness assessment of exterior precast concrete frames under column removal scenarios", J. Struct. Eng., 142(12), 1-13. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001616.
  21. Kang, S.B. and Tan, K.H. (2017), "Progressive collapse resistance of precast concrete frames with discontinuous reinforcement in the joint", J. Struct. Eng., 143(9), 1-13. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001828.
  22. Kang, S.B., Tan, K.H. and Yang, E.H. (2015), "Progressive collapse resistance of precast beam-column sub-assemblages with engineered cementitious composites", Eng. Struct., 98, 186-200. https://doi.org/10.1016/j.engstruct.2015.04.034.
  23. Kumar, V. and Patel, P.V. (2016), "Strengthening of axially loaded concrete columns using stainless steel wire mesh (SSWM)-numerical investigations", Struct. Eng. Mech., 60(16), 279-299. https://doi.org/10.12989/sem.2016.60.6.979.
  24. Lew, H.S., Main, J.A., Bao, Y., Sadek, F., Chiarito, V.P., Robert, S.D. and Torres, J.O. (2017), "Performance of precast concrete moment frames subjected to column removal: Part 1, experimental study", PCI J., 62(5), 35-52.
  25. Main, J.A., Bao, Y., Lew, H.S. and Sadek, F. (2014), "Robustness of precast concrete frames: Experimental and computational studies", Proceedings of Structures Congress 2014, Boston, MA, USA, April.
  26. Main, J.A., Bao, Y., Lew, H.S., Sadek, F., Chiarito, V.P., Robert, S.D. and Torres, J.O. (2015), "An experimental and computational study of precast concrete moment frames under a column removal scenario", Report No. NIST 1886, National Institute of Standards and Technology, Department of Commerce, USA.
  27. Nimse, R.B., Joshi, D.D. and Patel, P.V. (2014), "Behavior of wet precast beam column connections under progressive collapse scenario: an experimental study", Int. J. Adv. Struct. Eng., 6, 149-159. https://doi.org/10.1007/s40091-014-0072-3.
  28. Nimse, R.B., Joshi, D.D. and Patel, P.V. (2015), "Experimental study on precast beam column connections constructed using RC corbel and steel billet under progressive collapse scenario", Proceedings of Structures Congress 2015, Portland, OR, USA.
  29. Obaidat, Y.T., Heyden, S. and Dahlb, O. (2010), "The effect of CFRP and CFRP/concrete interface models when modelling retrofitted RC beams with FEM", Compos. Struct., 92, 1391-1398. https://doi.org/10.1016/j.compstruct.2009.11.008.
  30. Parastesh, H., Hajirasouliha, I. and Ramezani, R. (2014), "A new ductile moment-resisting connection for precast concrete frames in seismic regions: An experimental investigation", Eng. Struct., 70, 144-157. https://doi.org/10.1016/j.engstruct.2014.04.001.
  31. Patel, D.D., Joshi, D.D. and Patel, P.V. (2015), "Experimental study on dry precast beam column connections under column removal scenario", Multi-disciplinary Sustainable Engineering: Current and Future Trends, Taylor & Francis Group, London, UK.
  32. Patoliya, B.G., Joshi, D.D. and Patel, P.V. (2017), "Nonlinear FE analysis of precast dry connection under column removal scenario", Int. J. Emerg. Technol. Adv. Eng., 7(2), 269-276.
  33. PCI (2010), PCI Design Handbook - Precast and Prestressed Concrete, 7th Edition, Precast/Prestressed Concrete Institute, Chicago, USA.
  34. Qian, K. and Li, B. (2018a), "Performance of precast concrete substructures with dry connections to resist progressive collapse", J. Perform. Constr. Facil., 31(4), 04018005-1-14. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001147.
  35. Qian, K. and Li, B. (2018b), "Strengthening and retrofitting precast concrete buildings to mitigate progressive collapse using externally bonded GFRP rtrips", J. Compos. Constr., 23(3), 04019018-1-15. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000943.
  36. Qian, K. and Li, B. (2019), "Investigation into resilience of precast concrete floors against progressive collapse", ACI Struct. J., 116(2), 171-182. https://doi.org/10.14359/51710878.
  37. Qian, K., Li, B. and Liu, Y. (2016), "Integrity of precast concrete structures to resist progressive collapse", Proceedings of Geotechnical and Structural Engineering Congress 2016, Phoenix, AZ, USA, February.
  38. Qian, K., Liang, S., Fu, F. and Fang, Q. (2019), "Progressive collapse resistance of precast concrete beam-column sub-assemblages with high-performance dry connections", Eng. Struct., 198, 598-615. https://doi.org/10.1016/j.engstruct.2019.109552.
  39. Saenz, L.P. (1964), "Discussion of ''Equation for the stress-strain curve of concrete" by Desayi P, Krishnan S.", ACI J., 61, 1229-1235.
  40. Singh, S.B., Reddy, A.L. and Khatri, C.P. (2014), "Experimental and parametric investigation of response of NSM CFRP-strengthened RC beams", J. Compos. Constr., 18(1), 04013021-1-11. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000411.
  41. Su, Y., Tian, Y. and Song, X. (2009), "Progressive collapse resistance of axially-restrained frame beams", ACI Struct. J., 106(5), 600-607.
  42. Sumer, Y. and Akta, M. (2015), "Defining parameters for concrete damage plasticity model", Chall. J. Struct. Mech., 1(3), 149-155. https://doi.org/10.20528/cjsmec.2015.07.023.
  43. UFC 4-023-03 (2013), Design of Buildings to Resist Progressive Collapse, Department of Defense, Washington, D.C., USA.
  44. Vidjeapriya, R. and Jaya, K.P. (2013), "Experimental study on two simple mechanical precast beam-column connections under reverse cyclic loading", J. Perform. Constr. Facil., 27(4), 402-414. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000324.
  45. Wang, T. and Hsu, T.T. (2001), "Nonlinear finite element analysis of concrete structures using new constitutive models", Comput. Struct., 79(32), 2781-2791. https://doi.org/10.1016/S0045-7949(01)00157-2.
  46. Yu, J. and Tan, K. (2013), "Experimental and numerical investigation on progressive collapse resistance of reinforced concrete beam column sub-assemblages", Eng. Struct., 55, 90-106. https://doi.org/10.1016/j.engstruct.2011.08.040.