Steel and Composite Structures

  • 제34권6호
  • /
  • Pages.863-875
  • /
  • 2020
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental and numerical evaluation of rigid connection with reduced depth section

  • 투고 : 2019.03.28
  • 심사 : 2020.02.18
  • 발행 : 2020.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

After medium or strong earthquakes, damage in the reduced portion of RBS connections occurs due to plastic deformations. The purpose of this paper is to numerically and experimentally investigate the reduced depth section connection as a replaceable fuse. In this regard, three commonly used rigid connections with RBS, a replaceable fuse with RBS, and a replaceable fuse with Reduced Depth Section (RDS-F) were evaluated. All specimens were subjected to quasi-static cyclic load until failure. Although the final strength of the RDS-F is lower than that of the other two, laboratory results showed that it had the maximum ductility among the three samples. The numerical models of all three laboratory samples were constructed in ABAQUS, and the results were verified with great accuracy. The results of more than 28 numerical analyses showed that the RDS-F sample is more ductile than the other specimens. Moreover, the thickness of the web and the plastic section modulus increasing, the final strength would be equal to the other specimens. Therefore, the modified RDS-F with replaceability after an earthquake can be a better alternative for RBS connections.

키워드

과제정보

The authors would like to gratefully thank the structural research lab of the Islamic Azad University of Kermanshah and the 'NOVIN SAZE FIDER ZAGROSS Industrial Group' company.

참고문헌

  1. ABAQUS/CAE User's Guide 6.13. 2016.
  2. Akrami, V. and Erfani, S. (2015), "Effect of local web buckling on the cyclic behavior of reduced web beam sections (RWBS)", Steel Compos. Struct., 18(3), 641-657. https://doi.org/10.12989/scs.2015.18.3.641.
  3. ANSI/AISC 358-16 (2016), Prequalified connections for special and intermediate steel moment frames for seismic applications, American Institute of Steel Construction; Chicago, Illinois, USA.
  4. ASTM Standard A370-02 (2002), Standard test methods and definitions for mechanical testing of steel products, American Society for Testing and Materials; Philadelphia, PA.
  5. DIN 18800, Teil 3: "Stahlbauten - Stabilitatsfalle, Plattenbeulen", Beuth Verlag GmbH, November 1990 DK 693.814.073.1.
  6. Deylami, A. and Tabar, A.M. (2013), "Promotion of cyclic behavior of reduced beam section connections restraining beam web to local buckling", Thin-Wall. Struct., 73, 112-120. https://doi.org/10.1016/j.tws.2013.07.013
  7. Engelhardt, M.D. and Husain, A.S. (1993), "Cyclic-loading performance of welded flange-bolted web connection", J. Struct. Eng., 119(12), 3537-3550. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:12(3537).
  8. FEMA- 440 (2005), Improvement of nonlinear static seismic analysis procedures, Federal Emergency Management Agency; Redwood City.
  9. FEMA-350 (2000), Recommended Seismic Design Provisions for New Moment Frame Buildings Report, Federal Emergency Management Agency; Washington DC.
  10. Hassanien, S.H., Ramadan, H.M., Abdel-Salam, M.N. and Mourad, S.A. (2014), "Experimental study of prequalified status of flush end plate connections", HBRC Journal.
  11. Hedayat, A.A. and Celikag, M. (2009), "Post-Northridge connection with modified beam end configuration to enhance strength and ductility", J. Constr. Steel Res., 65(7), 1413-1430. https://doi.org/10.1016/j.jcsr.2009.03.007.
  12. ISO 898-1 (2009), mechanical properties of fasteners made of carbon steel and alloy steel -Part 1:, screws and studs with pacified property classes - coarse thread and fine pitch thread, International Organization for Standardization; Geneva, Switzerland.
  13. Lee, C.H., Jeon, S.W., Kim, J.H. and Uang, C.M. (2005), "Effects of panel zone strength and beam web connection method on seismic performance of reduced beam section steel moment connections", J. Struct. Eng., 131(12), 1854-1865. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:12(1854).
  14. Lu, L., Xu, Y., Liu, J. and Lim, J. B. (2018), "Cyclic performance and design recommendations of a novel weak-axis reduced beam section connection", Steel Compos. Struct., 27(3), 337-353. https://doi.org/10.12989/scs.2018.27.3.337.
  15. Mahin, S.A. (1998), "Lessons from damage to steel buildings during the Northridge earthquake", Eng. Struct., 20(4-6), 261-70. https://doi.org/10.1016/S0141-0296(97)00032-1.
  16. Maleki, S. and Tabbakhha, M. (2012), "Numerical study of Slotted-Web-Reduced-Flange moment connection", J. Constr. Steel Res., 69(1), 1-7. https://doi.org/10.1016/j.jcsr.2011.06.003.
  17. Miller, D.K. (1998), "Lessons learned from the Northridge earthquake", Eng. Struct., 20(4-6), 249-60. https://doi.org/10.1016/S0141-0296(97)00031-X.
  18. Oh, K., Lee, K., Chen, L., Hong, S.B. and Yang, Y. (2015), "Seismic performance evaluation of weak axis column-tree moment connections with reduced beam section", J. Constr. Steel Res., 105, 28-38. https://doi.org/10.1016/j.jcsr.2014.10.005.
  19. Rahnavard, R., Hassanipour, A. and Siahpolo, N. (2015), "Analytical study on new types of reduced beam section moment connections affecting cyclic behavior", Case Studies in Struct. Eng., 3, 33-51. https://doi.org/10.1016/j.csse.2015.03.001.
  20. Roudsari, M.T., Abdollahi, F., Salimi, H., Azizi, S. and Khosravi, A.R. (2015), "The effect of stiffener on behavior of reduced beam section connections in steel moment-resisting frames", Int. J. Steel Struct., 15(4), 827-834. https://doi.org/10.1007/s13296-015-1205-7
  21. Saleh, A., Zahrai, S.M. and Mirghaderi, S.R. (2016), "Experimental study on innovative tubular web RBS connections in steel MRFs with typical shallow beams", Struct. Eng. Mech., 57(5), 785-808. https://doi.org/10.12989/sem.2016.57.5.785.
  22. Sofias, C.E., Kalfas, C.N. and Pachoumis, D.T. (2014), "Experimental and FEM analysis of reduced beam section moment endplate connections under cyclic loading", Eng. Struct., 59, 320-329. https://doi.org/10.1016/j.engstruct.2013.11.010.
  23. Swati, A.K. and Gaurang, V. (2014), "Study of steel moment connection with and without reduced beam section", Case Studies in Struct. Eng., 1, 26-31. https://doi.org/10.1016/j.csse.2014.04.001.
  24. Tahamouli Roudsari, M., Jamshidi K.H. and Mohebi Zangeneh, M. (2016), "Experimental and numerical investigation of IPE reduced beam sections with diagonal web stiffeners", J. Earthq. Eng., 1-20. https://doi.org/10.1080/13632469.2016.1234422.
  25. Tsavdaridis, K.D., Faghih, F. and Nikitas, N. (2014), "Assessment of perforated steel beam-to-column connections subjected to cyclic loading", J. Earthq. Eng., 18(8), 1302-1325. https://doi.org/10.1080/13632469.2014.935834.
  26. Tsavdaridis, K.D. and Papadopoulos, T. (2016), "A FE parametric study of RWS beam-to-column bolted connections with cellular beams", J. Constr. Steel Res., 116, 92-113. https://doi.org/10.1016/j.jcsr.2015.08.046.
  27. Wilkinson, S., Hurdman, G. and Crowther, A. (2006), "A moment resisting connection for earthquake resistant structures", J. Constr. Steel Res., 62(3), 295-302. https://doi.org/10.1016/j.jcsr.2005.07.011.
  28. Zahrai, S.M., Mirghaderi, S.R. and Saleh, A. (2017a), "Tubular Web Reduced Beam Section (TW-RBS) connection, a numerical and experimental study and result comparison", Steel Compos. Struct., 23(5), 571-583. https://doi.org/10.12989/scs.2017.23.5.571.
  29. Zahrai, S.M., Mirghaderi, S.R. and Saleh, A. (2017b), "Increasing plastic hinge length using two pipes in a proposed web reduced beam section, an experimental and numerical study", Steel Compos. Struct., 23(4), 421-433. https://doi.org/10.12989/scs.2017.23.4.421.
  30. Zareia, A., Vaghefi, M. and Fiouz, A.R. (2016), "Numerical investigation seismic performance of rigid skewed beam-tocolumn connection with reduced beam section", Struct. Eng. Mech., 57(3), 507-528. https://doi.org/10.12989/sem.2016.57.3.507.