Steel and Composite Structures

  • 제34권6호
  • /
  • Pages.853-862
  • /
  • 2020
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Optimization of cables size and prestressing force for a single pylon cable-stayed bridge with Jaya algorithm

  • ATMACA, Barbaros (Karadeniz Technical University, Department of Civil Engineering) ;
  • DEDE, Tayfun (Karadeniz Technical University, Department of Civil Engineering) ;
  • GRZYWINSKI, Maksym (Czestochowa University of Technology, Faculty of Civil Engineering)
  • 투고 : 2019.11.20
  • 심사 : 2020.01.23
  • 발행 : 2020.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

In recent years, due to the many advantages cable-stayed bridges have often constructed in medium and long span. These advantages can be listed as an aesthetically pleasing appearance, economic and easy construction, etc. The main structural elements of cable-stayed bridges are listed as deck, pylon, cables and foundation. Perhaps one of the most vital and expensive of these structural elements is stay-cables. Stay-cables ensure the allowable displacement and distribution of bending moments along the bridge deck with prestressing force. Therefore the optimum design of the stay-cables and prestressing force are very important in achieving the performance expected from the cable-stayed bridges. This paper aims to obtain the stay-cables size and prestressing force optimization of the cable-stayed bridge. For this purpose, single pylon and fan type cable configuration Manavgat Cable-Stayed Bridge was selected as an example. The three dimensional (3D) finite element model (FEM) of the bridge was created with SAP2000. Analysis of the 3D FEM of the bridge was conducted under the different combined effects of the self-weight of the structural element, prestressing force of stay-cable and live load. Stay-cable stress and deck displacement were taken into account as constraints for the optimization problem. To optimize this existing bridge a metaheuristic algorithm named Jaya was used in the optimization process. 3D FEM of the selected bridge was repeatedly analyzed by using Open Applicable Programming Interface (OAPI) properties of SAP2000. To carry out the optimization process the developed program which integrates the Jaya algorithm and the required codes for calling SAP2000 is coded in MATLAB. At the end of the study, the total weight of the stay-cables was reduced more than 40% according to existing stay cables under loads taken into account.

키워드

참고문헌

  1. AASHTO, (2012), LRFD bridge design specifications, 6th Ed., Washington, D.C.
  2. Artar, M. (2016a), "Optimum design of braced steel frames via teaching learning based optimization" Steel Compos. Struct., 22(4), 733-744. https://doi.org/10.12989/SCS.2016.22.4.733
  3. Artar, M. (2016b), "A comparative study on optimum design of multi-element truss structures" Steel and Composite Structures, 22(3), 521-535. https://doi.org/10.12989/SCS.2016.22.3.521
  4. Atmaca, B. and Ates, S. (2012), "Construction stage analysis of three-dimensional cable-stayed bridges", Steel Compos. Struct., 12(5), 413-426.. https://doi.org/10.12989/scs.2012.12.5.413
  5. Baldomir, A., Hernandez, S., Nieto, F. and Jurado, J.A. (2010). "Cable optimization of a long span cable stayed bridge in La Coruna (Spain)", Adv. Eng. Softw., 41, 931-938.. https://doi.org/10.1016/j.advengsoft.2010.05.001
  6. Chen, D.W., Au, F.T.K., Tham, L.G. and Lee, P.K.K. (2000), "Determination of initial cable forces in prestressed concrete cable-stayed bridges for given design deck profiles using the force equilibrium method", J. Comput. Struct., 74, 1-9. https://doi.org/10.1016/S0045-7949(98)00315-0
  7. Cheng, J., Xiao, R. and Jiang, J. (2004), "Probabilistic determination of initial cable forces of cable-stayed bridges under dead loads", Struct. Eng. Mech., 17(2), 267-279. https://doi.org/10.12989/sem.2004.17.2.267.
  8. Dede, T. (2018), "Jaya algorithm to solve single objective size optimization problem for steel grillage structures", Steel Compos. Struct., 26(2), 163-170. https://doi.org/10.12989/scs.2018.26.2.163
  9. Fabbrocino, F., Modano, M., Farina, I., Carpentieri, G. and Fraternali, F. (2017), "Optimal prestress design of composite cable-stayed bridges", Compos. Struct., 169, 167-172. https://doi.org/10.1016/j.compstruct.2016.09.008.
  10. Ferreira, F. and Simoes, L. (2019), "Optimum design of a cablestayed steel footbridge with three dimensional modelling and control devices", Eng. Struct., 180, 510-523. https://doi.org/10.1016/j.engstruct.2018.11.038.
  11. Freire, A.M.S., Negrao, J.H.O. and Lopes, A.V. (2006), "Geometrical nonlinearities on the static analysis of highly flexible steel cable-stayed bridges", Comput. Struct., 84, 2128-2140. https://doi.org/10.1016/j.compstruc.2006.08.047.
  12. Grzywinski, M., Dede, T. and O zdemir, Y.I. (2019), "Optimization of the braced dome structures by using Jaya algorithm with frequency constraints", Steel Compos. Struct., 30(1), 47-55. https://doi.org/10.12989/scs.2019.30.1.047.
  13. Hassan, M.M. (2013), "Optimization of stay cables in cable-stayed bridges using finite element, genetic algorithm, and B-spline combined technique", Eng. Struct., 49, 643-654. https://doi.org/10.1016/j.engstruct.2012.11.036
  14. Hassan, M.M., Annan, C.D. and Norlander, G.W. (2013), "Optimal design of stay cables in cable-stayed bridges", Proceedings of the 3rd International Structural Specialty Conference, Edmonton, Alberta.
  15. Hewson, N. (2003), Prestressed concrete bridges: design and construction, Thomas Telford Publishing, London.
  16. Ho-Huu, V., Vo-Duy T., Duong-Gia, D. and Nguyen-Thoi, T. (2018), "An efficient procedure for lightweight optimal design of composite laminated beams", Steel Compos. Struct., 27(3), 297-310. https://doi.org/10.12989/scs.2018.27.3.297.
  17. Janjic, D., Pircher, M. and Pircher, H. (2003), "Optimization of cable tensioning in cable-stayed bridges", J. Bridge Eng.= ASCE, 8, 131-137. https://doi.org/10.1061/(ASCE)1084-0702(2003)8:3(131)
  18. Jorquera-Lucerga, J.J., Lozano-Galant, J.A. and Turmo, J. (2016), "Structural behavior of non-symmetrical steel cable-stayed bridges", Steel Compos. Struct., 20(2), 447-468. https://doi.org/10.12989/scs.2016.20.2.447.
  19. Kim, K. and Lee, H.S. (2001), "Analysis of target configurations under dead loads for cablesupported bridges", Comput. Struct., 79(29-30), 2681-292. https://doi.org/10.1016/S0045-7949(01)00120-1
  20. Lee, T.Y., Kim, Y.H. and Kang, S.W. (2008), "Optimization of tensioning strategy for asymmetric cable-stayed bridge and its effect on construction process", Struct. Multidisc. Optim., 35, 623-629. https://doi.org/10.1007/s00158-007-0172-9
  21. Leonhardt, F. (1987), "Cable stayed bridges with prestressed concrete", J. Prestress. Concrete Inst., 32(5), 1-30.
  22. Martins, A.M.B., Simoes, L.M.C. and Negrao, J.H.J.O. (2015), "Cable stretching force optimization of concrete cable-stayed bridges including construction stages and time-dependent effects", Struct. Multidisc. Optim., 51, 757-772. https://doi.org/10.1007/s00158-014-1153-4
  23. Rao, R.V. (2016), "Jaya: A simple and new optimization algorithm for solving constrained and unconstrained optimization problems", Int. J. Ind. Eng. Comput., 7, 19-34. https://doi.org/10.5267/j.ijiec.2015.8.004
  24. SAP2000. (2016), Computers & Structures, CALIFORNIA, 2016.
  25. Simoes, L.M.C., Martins, A.M.B. and Monteiro, S.R.S. (2009), "Discrete optimum design of cable-stayed bridges", Proceedings of the 8th World Congress on Structural and Multidisciplinary Optimization, 1-9.
  26. Xiao, R., Jia, L., Song, X. and Xiang, H. (2001), "Influence matrix method of cable tension optimization for long span cable-stayed bridges", Proceedings of the IABSE Conference on cablesupported bridges, Seoul.

피인용 문헌

  1. An Adjustment Method for the Suspender Tension of CFSTTTHAB Based on Influence Matrix of Single Suspender vol.2020, 2020, https://doi.org/10.1155/2020/1232835
  2. Optimization of Cable Force Adjustment in Cable-Stayed Bridge considering the Number of Stay Cable Adjustment vol.2020, 2020, https://doi.org/10.1155/2020/4527309
  3. Replacement of Cable Stays in Yonghe Bridge in Tianjin, China vol.2020, 2020, https://doi.org/10.1155/2020/6650393
  4. Mechanical Characteristics of the Main Tower of a Polygonal Line Tower Cable-Stayed Bridge vol.2020, 2020, https://doi.org/10.1155/2020/7090426
  5. Bearing Repair and Monitoring for Poyanghu Cable-Stayed Bridge vol.2020, 2020, https://doi.org/10.1155/2020/8819360
  6. The USGT Method for Suspender Tensioning of Self-Anchored Suspension Bridges vol.2021, 2020, https://doi.org/10.1155/2021/6619924
  7. Estimation of Extreme Cable Forces of Cable-Stayed Bridges Based on Monitoring Data and Random Vehicle Models vol.2021, 2020, https://doi.org/10.1155/2021/8897427
  8. A comparative study of multi-objective evolutionary metaheuristics for lattice girder design optimization vol.77, pp.3, 2020, https://doi.org/10.12989/sem.2021.77.3.417
  9. EnPSO: An AutoML Technique for Generating Ensemble Recommender System vol.46, pp.9, 2020, https://doi.org/10.1007/s13369-021-05670-z
  10. Performance of Jaya algorithm in optimum design of cold-formed steel frames vol.40, pp.6, 2021, https://doi.org/10.12989/scs.2021.40.6.795
  11. Mechanical performance analysis and stiffness test of a new type of suspension bridge vol.15, pp.5, 2021, https://doi.org/10.1007/s11709-021-0760-6