DOI QR코드

DOI QR Code

Study on midtower longitudinal stiffness of three-tower four-span suspension bridges with steel truss girders

  • Cheng, Jin (State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University) ;
  • Xu, Hang (Department of Bridge Engineering, Tongji University) ;
  • Xu, Mingsai (Department of Bridge Engineering, Tongji University)
  • 투고 : 2019.01.09
  • 심사 : 2019.11.12
  • 발행 : 2020.03.25

초록

The determination of midtower longitudinal stiffness has become an essential component in the preliminary design of multi-tower suspension bridges. For a specific multi-tower suspension bridge, the midtower longitudinal stiffness must be controlled within a certain range to meet the requirements of sliding resistance coefficient and deflection-to-span ratio. This study presents a numerical method to divide different types of midtower and determine rational range of longitudinal stiffness for rigid midtower. In this method, influence curves of midtower longitudinal stiffness on sliding resistance coefficient and maximum vertical deflection-to-span ratio are first obtained from the finite element analysis. Then, different types of midtower are divided based on the regression analysis of influence curves. Finally, rational range for longitudinal stiffness of rigid midtower is derived. The Oujiang River North Estuary Bridge which is a three-tower four-span suspension bridge with two main spans of 800m under construction in China is selected as the subject of this study. This will be the first three-tower four-span suspension bridge with steel truss girders and concrete midtower in the world. The proposed method provides an effective and feasible tool for engineers to design midtower of multi-tower suspension bridges.

키워드

과제정보

연구 과제 주관 기관 : Ministry of Science and Technology of China, Central Universities

This work presented herein has been supported by the National Key Research and Development Program of China under grant numbers 2018YFC0809600 and 2018YFC0809601, the Ministry of Science and Technology of China under grant number SLDRCE19-B-09 and the Fundamental Research Funds for the Central Universities under grant number 22120180316. The supports are gratefully acknowledged.

참고문헌

  1. Cao, H.Y., Qian, X.D., Zhou, Y.L., Chen, Z.J. and Zhu, H.P. (2018), "Feasible range for midtower lateral stiffness in three-tower suspension bridges", J. Bridge Eng., 23(3), 06017009. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001196.
  2. Cheng, Z., Zhang, Q., Bao, Y., Jia, D., Bu, Y. and Li, Q. (2018), "Analytical study on frictional resistance between cable and saddle equipped with friction plates for multi-span suspension bridges", J. Bridge Eng., 23(1), 04017118. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001176.
  3. Choi, D.H., Gwon, S.G. and Na, H.S. (2014), "Simplified analysis for preliminary design of towers in suspension bridges", J. Bridge Eng., 19(3), 04013007. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000551.
  4. Choi, D.H., Gwon, S.G., Yoo, H. and Na, H.S. (2013), "Nonlinear static analysis of continuous multi-span suspension bridges", Int. J. Steel Struct., 13(1), 103-115. https://doi.org/10.1007/s13296-013-1010-0.
  5. Collings, D. (2016), "Multiple-span suspension bridges: State of the art", Proc., Inst. Civil Eng., Bridge Eng., 169(3), 215-231. https://doi.org/10.1680/jbren.15.00035.
  6. Daniel, R.A., van Dooren, F.J. and de Meijer, R.H. (2010), "Comparison of a single and double main span suspension bridge for the western Scheldt crossing", IABSE Symp. Rep., 97(35), 9-16. https://doi.org/10.2749/222137810796023980
  7. Forsberg, T. (2001), "Multi-span suspension bridges", Int. J. Steel Struct., 1(1), 63-73.
  8. Fukuda, T. (1967), "Analysis of multispan suspension bridges", J. Struct. Div., 93(3), 63-86. https://doi.org/10.1061/JSDEAG.0001720
  9. Ge, Y.J. and Xiang, H.F. (2011), "Extension of bridging capacity of cable-supported bridges using double main spans or twin parallel decks solutions", Struct. Eng. Mech., 7, 551-567. https://doi.org/10.1080/15732479.2010.496980.
  10. Hasegawa, K., Kojima, H., Sasaki, M. and Takena, K. (1995), "Frictional resistance between cable and saddle equipped with friction plate", J. Struct. Eng., 121(1), 1-14. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:1(1).
  11. Ji, L., Chen, C. and Feng, Z.X. (2007), "Study on slip resistance between main cable and saddle on middle tower of three-tower suspension bridge", Highw., 6, 1-6. https://doi.org/10.3969/j.issn.0451-0712.2007.06.001.
  12. JTG-D60-2015 (2015), General Specifications for the Design of Highway Bridges and Culverts, CCCC Highway Consultants Co., Ltd., China Communications Press, Beijing, China.
  13. JTG/T-D65-05-2015 (2015), Specifications for the Design of Highway Suspension Bridges, CCCC Highway Consultants Co., Ltd., China Communications Press, Beijing, China.
  14. Jung, J., Kim, J., Baek, J. and Choi, H. (2010), "Practical design of continuous two main-span suspension bridge in Korea", IABSE Symp. Rep., 97(29), 62-69. https://doi.org/10.2749/222137810796024501.
  15. Kim, H.S., Sohn, Y.K. and Yoo, D.H. (2012), "Parametric study on safety factor for cable slip in four-span suspension bridges", IABSE Congress Rep., Int. Assoc. for Bridge and Structural Engineering, Zurich. https://doi.org/10.2749/222137912805112158.
  16. Ma, X., Nie, J. and Fan, J. (2016), "Longitudinal stiffness of multispan suspension bridges", J. Bridge Eng., 21(5), 06015010. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000878.
  17. Ruan, X., Zhou, J. and Caprani, C.C. (2016), "Safety assessment of the antisliding between the main cable and middle saddle of a three-pylon suspension bridge considering traffic load modeling", J. Bridge Eng., 21(10), 04016069. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000927.
  18. Takena, K., Sasaki, M., Hata, K. and Hasegawa, K. (1992), "Slip behavior of cable against saddle in suspension bridges", J. Struct. Eng., 118(2), 377-391. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:2(377).
  19. Thai, H.T. and Choi, D.H. (2013), "Advanced analysis of multi-span suspension bridges", J. Constr. Steel Res., 90, 29-41. https://doi.org/10.1016/j.jcsr.2013.07.015.
  20. Wang, X.L. and Chai, S.B. (2018), "Determining the middle tower stiffness value in an in-plane double-cable triple-tower suspension bridge", J. Bridge Eng., 23(7), 06018001. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001254.
  21. Wang, X.L., Chai, S.B. and Xu, Y. (2017), "Sliding resistance of main cables in double-cable multispan suspension bridges", J. Bridge Eng., 22(3), 06016011. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001018.
  22. Yoshida, O., Okuda, M. and Moriya, T. (2004), "Structural characteristics and applicability of four-span suspension bridge", J. Bridge Eng., 9(5), 453-463. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:5(453).
  23. Zhang, L.W., Xiao, R.C., Jiang, Y. and Chai, S.B. (2012). "The characteristics of the multi-span suspension bridge with double main cables in the vertical plane", Struct. Eng. Mech., 42(3), 291-311. https://doi.org/10.12989/sem.2012.42.3.291.
  24. Zhang, L.W., Xiao, R.C., Sun, B., Jiang, Y., Zhang, X.Y., Zhuang, D.L., Zhou, Y.G. and Tu, X. (2013), "Study on economic performances of multi-span suspension bridges part 1: simple estimation formulas", Struct. Eng. Mech., 47(2), 265-286. https://doi.org/10.12989/sem.2013.47.2.265.
  25. Zhang, L.W., Xiao, R.C., Sun, B., Jiang, Y., Zhang, X.Y., Zhuang, D.L., Zhou, Y.G. and Tu, X. (2013), "Study on economic performances of multi-span suspension bridges part 2: parametric study", Struct. Eng. Mech., 47(2), 287-305. https://doi.org/10.12989/sem.2013.47.2.287.
  26. Zhang, Q,H. and Li, Q. (2013), "Study on cable-saddle frictional characteristics of long-span suspension bridges", China Civil Eng. J., 46(4), 85-92. https://doi.org/10.15951/j.tmgcxb.2013.04.006.
  27. Zhang, Q.H., Cheng, Z.Y., Cui, C., Bao, Y., He, J. and Li, Q. (2017), "Analytical model for frictional resistance between cable and saddle of suspension bridges equipped with vertical friction plates", J. Bridge Eng., 22(1), 04016103. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000986.
  28. Zhang, Q.H., Kang, J.P., Bao, Y., Cheng, Z.Y., Jia, D. L. and Bu, Y.Z. (2018), "Numerical study on cable-saddle frictional resistance of multispan suspension bridges", J. Constr. Steel Res., 150, 51-59. https://doi.org/10.1016/j.jcsr.2018.08.006.
  29. Zhang, X.J. and Fu, G.N. (2014), "Seismic performance and its favorable structural system of three-tower suspension bridge", Struct. Eng. Mech., 50(2), 215-229. https://doi.org/10.12989/sem.2014.50.2.215.

피인용 문헌

  1. Dynamic Response of Multitower Suspension Bridge Deck Pavement under Random Vehicle Load vol.2021, 2021, https://doi.org/10.1155/2021/6667853