References
- "2018년도 발전설비 현황", Korea Power Exchange, No. 388003, 2018.
- P. Zayicek, "Inspection and Damage Assessment of Turbine Casing Cracks," EPRI, 1014138, 2008.
- J. Siefert, J. Shingledecker, "Steam Turbine Casing and Valve Body Repair Guidelines," EPRI, 3002001473, 2013.
- Holdsworth, Stuart, "Creep-fatigue failure diagnosis," Materials, Vol.8, No.11, pp.7757-7769, November, 2015. https://doi.org/10.3390/ma8115418
- NIMS Creep Datasheet No. 31B, National Institute for Materials Science, 1994. Available: https://smds.nims.go.jp/MSDS/en/sheet/Creep.html, Accessed on July 2019.
- NIMS Fatigue Datasheet No. 58, National Institute for Materials Science, 1987. Available: https://smds.nims.go.jp/MSDS/en/sheet/Fatigue.html, Accessed on July 2019.
- Robinson, E. L., "Effect of temperature variation on the long-time rupture strength of steels," Trans. ASME, Vol. 77, 1952.
- R. Viswanathan, "Damage Mechanisms and Life Assessment of High-Temperature Components," ASM international, 1995.
- Takahashi, I., & Fujiwara, S., "Transient characteristics of thermal contact conductance between isotropic rough surfaces of metals," Heat Transfer-Asian Research: Co-sponsored by the Society of Chemical Engineers of Japan and the Heat Transfer Division of ASME, Vol. 30, No.4, pp.341-356, 2001. https://doi.org/10.1002/htj.1022
- Shojaefard, M. H., & Goudarzi, K., "The numerical estimation of thermal contact resistance in contacting surfaces," American Journal of Applied Sciences, Vol. 5, No. 11, pp.1566-1571, 2008. https://doi.org/10.3844/ajassp.2008.1566.1571
- Ramberg, W., & Osgood, W. R., "Description of stress-strain curves by three parameters,"National Advisory Committee For Aeronautics, Technical Note No. 902, Washington DC., 1943.
- Seeger, T., & Heuler, P., "Generalized Application of Neuber's Rule," Journal of Testing and Evaluation, Vol. 8, No. 4, pp. 199-204, 1980. https://doi.org/10.1520/JTE11613J
- Taira S., Fujino M. & Ohtani R., "Collaborative study on thermal fatigue properties of high temperature alloys in Japan," Fatigue & Fracture of Engineering Materials & Structures, Vol.1, No.4, pp.495-508. https://doi.org/10.1111/j.1460-2695.1979.tb01336.x