DOI QR코드

DOI QR Code

비파괴 기법을 이용한 유동성 채움재의 초기경화특성 평가

Evaluation of Early-age Properties of Controlled Low Strength Material Using Non-destructive Testing

  • Kim, Dong-Ju (School of Agricultural Civil & Bio-Industrial Engineering, Kyungpook National University) ;
  • Kim, Sang-Cheol (School of Agricultural Civil & Bio-Industrial Engineering, Kyungpook National University) ;
  • Han, WooJin (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Lee, Jong-Sub (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Byun, Yong-Hoon (School of Agricultural Civil & Bio-Industrial Engineering, Kyungpook National University)
  • 투고 : 2019.10.29
  • 심사 : 2020.02.21
  • 발행 : 2020.03.31

초록

Controlled Low Strength Material (CLSM) has high fluidity and self-compaction characteristics. CLSM is mainly used for backfilling the excavated road. Early-age properties of CLSM should be characterized for fast restoration of the road. In this study, shear wave monitoring and Vicat needle test are performed to investigate the early-age properties of CLSM depending on the setting time. CLSM consists of CSA cement, fly ash, silt and sand, accelerator, and water. Five fly ashes with different chemical properties are used for CLSM samples. The penetration of CLSM along setting time is obtained through the Vicat needle test. A pair of bender elements are placed in a mold for shear wave measurement, and the change in shear waves with the setting time is monitored. The experimental results show that, regardless of the type of fly ash, the penetration depth decreases and the shear wave velocity increases with the setting time. Depending on the type of fly ash, initial and final times and shear wave velocity change. After testing, the correlation between penetration and shear wave velocity is obtained with high coefficient of determination. The shear wave measurement technique using the bender element can be used to identify early-age properties.

키워드

참고문헌

  1. American Concrete Institute Committee 229 (ACI Committee), 1999. Controlled low-strength materials (CLSM).
  2. American Society for Testing and Materials (ASTM), 2006. Standard test methods for time of setting of hydraulic cement by Vicat needle, C191.
  3. American Society for Testing and Materials (ASTM), 2016. Standard test methods for time of setting of concrete mixtures by penetration resistance, C403.
  4. American Society for Testing and Materials (ASTM), 1994. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete, C618.
  5. American Society for Testing and Materials (ASTM), 2017. Standard test methods for consistency of controlled low strength material (CLSM), D6103.
  6. Byun, Y. H., W. J. Han, E. Tutumluer, and J. S. Lee, 2016. Elastic wave characterization of controlled lowstrength material using embedded pizoeletric transducers. Construction and Building Materials 127(2016): 210-219. doi:10.1016/j.conbuildmat.2016.09.113.
  7. Cheon, S. H., S. S. Jeong, D. S. Lee, and D. H. Kim, 2006. Mechanical characteristics of accelerated flowable backfill materials using surplus soil for underground power utilities. Journal of The Korean Society of Civil Engineers 26(3):303-312.
  8. Dumoulin, C., G. Karaiskos, J. Carette, S. Staquet, and A. Deraemaeker, 2012. Monitoring of the ultrasonic P-wave velocity in early-age concrete with embedded piezoelectric transducers. Smart Materials and Structures 21(4): 047001. doi:10.1088/0964-1726/21/4/047001.
  9. Gu, H., G. Song, H. Dhonde, Y. L. Mo, and Yan. S, 2006. Concrete early-age strength monitoring using embedded piezoelectric transducers. Smart Materials and Structures 15(6): 1837. doi:10.1088/0964-1726/15/6/038.
  10. Gu, X., J. Yang, M. Huang, and G. Gao, 2015. Bender element tests in dry and saturated sand: Signal interpretation and result comparison. Soils and Foundations 55(5): 951-962. doi:10.1016/j.sandf.2015.09.002.
  11. Han, W. J., J. S. Lee, S. D. Cho, J. H. Kim, and Y. H. Byun, 2015. Study on correlation between compressive strength and compressional wave velocity for CLSM according to curing time. Journal of The Korean Geo-Environmental Society 16(11): 5-11. doi:10.14481/jkges.2015.16.11.5.
  12. Han, W. J., J. S. Lee, Y. H. Byun, S. D. Cho, and J. H. Kim, 2016. Characteristics of shear waves in controlled low strength material with curing time. Journal of The Korean Geo-Environmental Society 17(3): 13-19. doi:10.14481/jkges.2016.17.3.13.
  13. Hong, G. H., Y. S. Shin, and I. Y. Chung, 1996. A fundamental study on the development of compressive strength and E-modulus of concrete. Journal of the Architectural Institute of Korea 12(7): 229-235.
  14. Kim, D. S., and Y. W. Choo, 2001. Dynamic deformation characteristics of cohesionless soils in Korea using resonant column tests. Journal of Korea Geotechnical Society 17(5):115-128.
  15. Lee, H. K., K. M. Lee, Y. H. Kim, H. Yim, and D. B. Bae, 2004. Ultrasonic in-situ monitoring of setting process of high-performance concrete. Cement and Concrete Research 34(4): 631-640. doi:10.1016/j.cemconres.2003.10.012.
  16. Lee, J. S., and C. Lee, 2006. Principles and considerations of bender element tests. Journal of Korea Geotechnical Society 17(5): 47-57.
  17. Lee, D. Y., D. M. Kim, Y. S. Ryu, and J. G. Han, 2015. Development and application of backfill material for reducing ground subsidence. Journal of Korean Geosynthetics Society 14(4): 147-158. doi:10.12814/jkgss.2015.14.4.147.
  18. Park, J. H., K. H. Lee, J. Y. Jo, and S. N. Kim, 2004. Deformation characteristics of underground pipe with in-situ soil CLSM. Journal of Korea Geotechnical Society 20(3):129-139.
  19. Reinhardt, H. W., and C. U. Grosse, 2003. Continuous monitoring of setting and hardening of mortar and concrete. Construction and Building Materials 18(3): 145-154. doi:10.1016/j.conbuildmat.2003.10.002.
  20. Ryu, Y. S., W. R. Chae, J. S. Koo, and D. Y. Lee, 2015. Development of rapid hardening backfill material for reducing ground subsidence. Journal of Korean Geosynthetics Society 14(3): 13-20. doi:10.12814/jkgss.2015.14.3.013.
  21. Sayer, C. M., and A. Dahlin, 1993. Propagation of ultrasound through hydrating cement pastes at early times. Advanced Cement Based Materials 1(1): 12-21. doi:10.1016/1065-7355(93)90004-8.
  22. Soliman, N. A., K. H. Khayat, M. Karray, and A. F. Omran, 2015. Piezoelectric ring actuator technique to monitor early-age properties of cement-based materials. Cement and Concrete Composites 63(2015): 84-95. doi:10.1016/j.cemconcomp.2015.09.001.
  23. Song, G., H. Gu, Y. L. Mo, T. T. C. Hsu, and H. Dhonde, 2007. Concrete structural health monitoring using embedded piezoceramic transducers. Smart Materials and Structures 16(4): 959. doi:10.1088/0964-1726/16/4/003.
  24. Won, J. P., and Y. S. Lee, 2001. Compressive strength of CLSM containing bottom ash. Journal of Korean Society of Agricultural Engineers 142-146.
  25. Zhu, J., S. H. Kee, D. Han, and Y. T. Tasi, 2011. Effects of air voids on ultrasonic wave propagation in early age cement pastes. Cement and Concrete Research 41(8):872-881. doi:10.1016/j.cemconres.2011.04.005.