초록
심층혼합공법은 오거를 사용하여 지반을 굴착한 후 지반안정재를 흙 재료와 혼합하여 연약지반에 개량체를 설치하는 공법으로, 지중에 설치되는 개량체는 흙 재료의 종류와 특성에 따라 압축강도가 다르게 발현되기도 한다. 이를 위해 기존의 연구에서는 순환유동층 보일러의 연소재를 고로슬래그의 알칼리 활성화 반응의 자극재로 활용하여 개발한 심층혼합공법용 지반안정재를 부산, 여수, 인천 지역의 점토와 혼합한 후 실내 배합시험을 실시하고, 결과를 분석하여 단위안정재량(γB)과 일축압축강도(qu)의 상관관계를 도출하였다. 본 연구에서는 새만금 지역을 대상으로 채취한 흙 재료에 대해 동일한 실내시험을 실시하여 도출된 상관관계에 대한 비교검토를 실시하였고, 현장에서 수행한 시험시공 결과를 분석하여 현장에서의 안정성을 평가하였다. 연구결과, 실내시험에서는 기존의 연구를 통해 도출된 단위안정재량(γB)과 일축압축강도(qu)의 상관관계를 만족하는 것으로 나타났고, 현장에서의 시험시공 결과는 현장의 기준강도에 비해 높은 일축압축강도를 보여 안정성 측면에서 우수한 것으로 나타났다.
The DMM (Deep mixing method) is a construction method in which an improved pile is installed in the soft ground by excavation ground using an auger and then mixing ground stabilizer with soil. Improved pile installed in the soft ground by the DMM may have different compressive strength depending on the properties and characteristics of the soil. In the previous study, laboratory tests were performed on the ground stabilizer for the DMM developed by using the ash of the circulating fluidized bed boiler as a stimulator for alkali activation of the blast furnace slag. And the test results were analyzed to derive the correlation between the unit weight of binder (γB) and the uniaxial compressive strength (qu). In this study, comparative reviews were conducted on the correlations derived from the same laboratory tests on soil material collected from the Saemangeum area and the stability of the site was evaluated by analyzing the test results performed at the site. As a result, the clay collected from the Saemangeum area satisfies the correlation between the unit weight of binder (γB) and the uniaxial compressive strength (qu) derived from the previous study. And the result of the test at the field showed a higher uniaxial compressive strength than the standard strength at the field, indicating excellent stability.