DOI QR코드

DOI QR Code

A versatile small-scale structural laboratory for novel experimental earthquake engineering

  • Chen, Pei-Ching (Department of Civil and Construction Engineering, National Taiwan University of Science and Technology) ;
  • Ting, Guan-Chung (Department of Mechanical Engineering, National Taiwan University) ;
  • Li, Chao-Hsien (Department of Structural Engineering, UC San Diego)
  • Received : 2019.06.19
  • Accepted : 2020.01.29
  • Published : 2020.03.25

Abstract

Experimental testing has been considered as one of the most straightforward approaches to realize the structural behavior for earthquake engineering studies. Recently, novel and advanced experimental techniques, which combine numerical simulation with experimental testing, have been developed and applied to structural testing practically. However, researchers have to take the risk of damaging specimens or facilities during the process of developing and validating new experimental methods. In view of this, a small-scale structural laboratory has been designed and constructed in order to verify the effectiveness of newly developed experimental technique before it is applied to large-scale testing for safety concerns in this paper. Two orthogonal steel reaction walls and one steel T-slotted reaction floor are designed and analyzed. Accordingly, a large variety of experimental setups can be completed by installing servo-hydraulic actuators and fixtures depending on different research purposes. Meanwhile, a state-of-the-art digital controller and multiple real-time computation machines are allocated. The integration of hardware and software interfaces provides the feasibility and flexibility of developing novel experimental methods that used to be difficult to complete in conventional structural laboratories. A simple experimental demonstration is presented which utilizes part of the hardware and software in the small-scale structural laboratory. Finally, experimental layouts of future potential development and application are addressed and discussed, providing the practitioners with valuable reference for experimental earthquake engineering.

Keywords

Acknowledgement

Supported by : Ministry of Science and Technology, Republic of China (Taiwan)

The construction and facilities in the small-scale structural laboratory were financially supported by the Ministry of Science and Technology, Republic of China (Taiwan) (MOST 105-3111-F-492-002).

References

  1. Ahmadizadeh, M., Mosqueda, G. and Reinhorn, A.M. (2008), "Compensation of actuator delay and dynamics for real-time hybrid structural simulation", Earthq. Eng. Struct. Dyn., 37(1), 21-42. https://doi.org/10.1002/eqe.743.
  2. Chae Y., Kazemibidokhti K. and Ricles J.M. (2013), "Adaptive time series compensator for delay compensation of servo-hydraulic actuator systems for real-time hybrid simulation", Earthq. Eng. Struct. Dyn, 42(11), 1697-1715. https://doi.org/10.1002/eqe.2294.
  3. Chen, C. and Ricles J.M. (2009), "Analysis of actuator delay compensation methods for real-time testing", Eng. Struct., 31(11), 2643-2655. https://doi.org/10.1016/j.engstruct.2009.06.012.
  4. Chen, P.C. and Tsai, K.C. (2013), "Dual compensation strategy for real-time hybrid testing", Earthq. Eng. Struct. Dyn., 42(1), 1-23. https://doi.org/10.1002/eqe.2189.
  5. Chen, P.C., Hsu, S.C., Zhong, Y.J. and Wang, S.J. (2019), "Real-time hybrid simulation of smart base-isolated raised floor systems for high-tech industry", Smart Struct. Sys., 23(1), 91-106. https://doi.org/10.12989/sss.2019.23.1.091.
  6. Chopra, A. (1995), "Dynamics of structures - Theory and applications to earthquake engineering", Prentice Hall, Englewood Cliffs, New Jersey.
  7. Darby, A.P., Williams, M.S. and Blakeborough, A. (2002) "Stability delay compensation for real-time substructure testing", J. Eng. Mech. (ASCE), 128(12), 1276 -1284. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:12(1276).
  8. Hayati S. and Song W. (2017), "An optimal discrete-time feedforward compensator for real-time hybrid simulation", Smart Struct. Syst., 20(4), 483-498. https://doi.org/10.12989/sss.2017.20.4.483
  9. Horiuchi, T., Inoue, M., Konno, T. and Namita, Y. (1999) "Real-time hybrid experimental system with actuator delay compensation and its application to a piping system with energy absorber", Earthq. Eng. Struct. Dyn., 28(10), 1121-1141. https://doi.org/10.1002/(SICI)1096-9845(199910)28:10%3C1121::AID-EQE858%3E3.0.CO;2-O,
  10. Hou, H., Chou, C.C., Zhou, J., Wu, M., Qu, B., Ye, H., Liu, H. and Li, J. (2016), "Cyclic tests of steel frames with composite lightweight infill walls", Earthq. Struct., 10(1), 163-178. https://doi.org/10.12989/eas.2016.10.1.163.
  11. Jang, D.D., Jung, H.J. and Moon, Y.J. (2014), "Active mass damper system using time delay control algorithm for building structure with unknown dynamics", Smart Struct. Syst., 13(2), 305-318. https://doi.org/10.12989/sss.2014.13.2.305.
  12. Jung, R.Y., Shing, P.B., Stauffer, E. and Bradford, T. (2007) "Performance of a real-time pseudodynamic test system considering nonlinear structural response", Earthq. Eng. Struct. Dyn., 36(12),1785-1809. https://doi.org/10.1002/eqe.722.
  13. Khoo, H.H., Tsai, K.C., Tsai, C.Y., Tsai, C.Y. and Wang, K.J. (2016), "Bidirectional substructure pseudo-dynamic tests and analysis of a full-scale two-story buckling-restrained braced frame", Earthq. Eng. Struct. Dyn., 45(7), 1085-1107. https://doi.org/10.1002/eqe.2696.
  14. Kim D., Jeon C. and Shim C. (2016), "Cyclic and static behaviors of CFT modular bridge pier with enhanced bracings", Steel Compos. Struct., 20(6), 1221-1236. https://doi.org/10.12989/scs.2016.20.6.1221.
  15. Kwon, O.S., Nakata, N., Elnashai, A.S., and Spencer, B.F. (2005) "A framework for multi-site distributed simulation and application to complex structural systems", J. Earthq. Eng., 9(5), 741-753. https://doi.org/10.1080/13632460509350564
  16. Lu, Z., Wang, Z., Masri, S. F., and Lu, X. (2017) "Particle impact dampers: past, present, and future", Struct. Control Health Monit, 25(1), e2058. https://doi.org/10.1002/stc.2058.
  17. Nakashima, M., Akazawa, T. and Igarashi, H. (1995), "Pseudo-dynamic testing using conventional testing devices", Earthq. Eng. Struct. Dyn., 24(10), 1409-1422. https://doi.org/10.1002/eqe.4290241009.
  18. Schellenberg, A.H., Becker, T.C. and Mahin, S.A. (2017), "Hybrid shake table testing method: Theory, implementation and application to midlevel isolation", Struct. Control Health Monit., 24, e1915. https://doi.org/10.1002/stc.1915.
  19. Schellenberg, A.H., Mahin, S.A., and Fenves, G.L. (2009) "Advanced implementation of hybrid simulation", Report No. 2009/104, Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA.
  20. Soleymani, M. and Khodadadi, M. (2014), "Adaptive fuzzy controller for active tuned mass damper of a benchmark tall building subjected to seismic and wind loads", Struct. Des. Tall Spec. Build., 23(10), 781-800. https://doi.org/10.1002/tal.1091.
  21. Wang, J.T., Gui, Y., Zhu, F., Jin, F. and Zhou, M.X. (2016), "Real-time hybrid simulation of multi-story structures installed with tuned liquid damper", Struct. Control Health Monit., 23(7), 1015-1031. https://doi.org/10.1002/stc.1822.
  22. Yang, C.Y., Dong, G.J., Ren, X.S., You S. and Schellenberg, A.H. (2015), "Real-time hybrid testing on a girder bridge model by using shaking- table and actuator", Proceedings of the 6th International Conference on Advances in Experimental Structural Engineering, Urbana-Champaign, Illinois, United States, August.
  23. Zhang, R., Lauenstein, P.V. and Phillips, B.M. (2016), "Real-time hybrid simulation of a shear building with a uni-axial shake table", Eng. Struct., 119, 217-229. https://doi.org/10.1016/j.engstruct.2016.04.022.
  24. Zhang, R., Phillips, B.M., Taniguchi, S., Ikenaga, M., and Ikago, K. (2017) "Shake table real-time hybrid simulation techniques for the performance evaluation of buildings with inter-story isolation", Struct. Control Health Monit., 24(10), e1971. https://doi.org/10.1002/stc.1971.

Cited by

  1. Machine-Learning Based Optimal Seismic Control of Structure with Active Mass Damper vol.10, pp.15, 2020, https://doi.org/10.3390/app10155342