과제정보
이 논문은 2020학년도 건국대학교의 연구년 교원 지원에 의하여 연구되었음. 이 논문은 2018년도 정부(과학기술정보통신부)의 재원으로 한국연구재단-미래선도기술개발사업의 지원을 받아 수행된 연구임(No. 2018M3C1B9069748).
참고문헌
- F. Gironi and V. Piemonte, "Bioplastics and Petroleum-based Plastics: Strengths and Weaknesses", Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2011, 33, 1949-1959. https://doi.org/10.1080/15567030903436830
- W. C. Li, H. Tse, and L. Fok, "Plastic Waste in the Marine Environment: A Review of Sources, Occurrence and Effects", Sci. Total Environ., 2016, 566, 333-349. https://doi.org/10.1016/j.scitotenv.2016.05.084
- C. Freeman, M. A. Young, and J. Fuller, "The Plastics Industry: A Comparative Study of Research and Innovation", Nat. Inst. Economic Rev., 1963, 26, 22-62. https://doi.org/10.1177/002795016302600103
- Z. Kuruppalil, "Green Plastics: An Emerging Alternative for Petroleum-based Plastics", Int. J. Eng. Res. Innov., 2011, 3, 59-64.
- R. L. Reddy, V. S. Reddy, and G. A. Gupta, "Study of Bio-plastics as Green and Sustainable Alternative to Plastics", Int. J. Emerg. Technol. Adv. Eng., 2013, 3, 76-81.
- C. R. Alvarez-Chavez, S. Edwards, R. Moure-Eraso, and K. Geiser, "Sustainability of Bio-based Plastics: General Comparative Analysis and Recommendations for Improvement", J. Clean. Prod., 2012, 23, 47-56. https://doi.org/10.1016/j.jclepro.2011.10.003
- R. K. Kulkarni, E. Moore, A. Hegyeli, and F. Leonard, "Biodegradable Poly(lactic acid) Polymers", J. Biomed. Mater. Res., 1971, 5, 169-181.
- D. Garlotta, "A Literature Review of Poly(lactic acid)", J. Polym. Environ., 2001, 9, 63-84. https://doi.org/10.1023/A:1020200822435
- R. E. Drumright, P. R. Gruber, and D. E. Henton, "Polylactic Acid Technology", Adv. Mater., 2000, 12, 1841-1846. https://doi.org/10.1002/1521-4095(200012)12:23<1841::AID-ADMA1841>3.0.CO;2-E
- Q. Chen, J. D. Mangadlao, J. Wallat, A. De Leon, J. K. Pokorski, and R. C. Advincula, "3D Printing Biocompatible Polyurethane/poly(lactic acid)/graphene Oxide Nanocomposites: Anisotropic Properties", ACS Appl. Mater. Interfaces, 2017, 9, 4015-4023. https://doi.org/10.1021/acsami.6b11793
- C. Dichtl, P. Sippel, and S. Krohns, "Dielectric Properties of 3D Printed Polylactic Acid", Adv. Mater. Sci. Eng., 2017, 2017, 1-10.
- N. Li, Y. Li, and S. Liu, "Rapid Prototyping of Continuous Carbon Fiber Reinforced Polylactic Acid Composites by 3D Printing", J. Mater. Proc. Technol., 2016, 238, 218-225. https://doi.org/10.1016/j.jmatprotec.2016.07.025
- C. Zengwen, H. Pan, J. Bian, L. Han, H. Zhang, L. Dong, and Y. Yang, "Transform Poly(lactic acid) Packaging Film from Brittleness to Toughness Using Traditional Industrial Equipments", Polymer, 2019, 180, 121728. https://doi.org/10.1016/j.polymer.2019.121728
- M. Razavi and S.-Q. Wang, "Why is Crystalline Poly(lactic acid) Brittle At Room Temperature?", Macromolecules, 2019, 52, 5429-5441. https://doi.org/10.1021/acs.macromol.9b00595
- Y. Yu, P. Xu, S. Jia, H. Pan, H. Zhang, D. Wang, and L. Dong, "Exploring Polylactide/poly(butylene adipate-co-terephthalate)/rare Earth Complexes Biodegradable Light Conversion Agricultural Films", Int. J. Biol. Macromol., 2019, 127, 210-221. https://doi.org/10.1016/j.ijbiomac.2019.01.044
- X. Li, X. Ai, H. Pan, J. Yang, G. Gao, H. Zhang, H. Yang, and L. Dong, "The Morphological, Mechanical, Rheological, and Thermal Properties of PLA/PBAT Blown Films with Chain Extender", Polym. Adv. Technol., 2018, 29, 1706-1717. https://doi.org/10.1002/pat.4274
- K. Prashantha, B. Lecouvet, M. Sclavons, M. F. Lacrampe, and P. Krawczak, "Poly(lactic acid)/halloysite Nanotubes Nanocomposites: Structure, Thermal, and Mechanical Properties as a Function of Halloysite Treatment", J. Appl. Polym. Sci., 2013, 128, 1895-1903. https://doi.org/10.1002/app.38358
- Y. Dong, J. Marshall, H. J. Haroosh, S. Mohammadzadehmoghadam, D. Liu, X. Qi, and K.-T. Lau, "Polylactic Acid (PLA)/Halloysite Nanotube (HNT) Composite Mats: Influence of HNT Content and Modification", Compos. Part A: Appl. Sci. Manuf., 2015, 76, 28-36. https://doi.org/10.1016/j.compositesa.2015.05.011
- J. Zhao, X. Li, H. Pan, X. Ai, H. Yang, H. Zhang, G. Gao, and L. Dong, "Rheological, Thermal and Mechanical Properties of Biodegradable Poly(lactic acid)/poly(butylene adipate-co-terephthalate)/poly(propylene carbonate) Polyurethane Trinary Blown Films", Polym. Bull., 2020, 77, 4235-4258. https://doi.org/10.1007/s00289-019-02942-5
- L. Bokobza, M. Rahmani, C. Belin, J. L. Bruneel, and N. E. El Bounia, "Blends of Carbon Blacks and Multiwall Carbon Nanotubes as Reinforcing Fillers for Hydrocarbon Rubbers", J. Polym. Sci. Part B: Polym. Phys., 2008, 46, 1939-1951. https://doi.org/10.1002/polb.21529
- G. Mittal, V. Dhand, K. Y. Rhee, S.-J. Park, and W. R. Lee, "A Review on Carbon Nanotubes and Graphene as Fillers in Reinforced Polymer Nanocomposites", J. Ind. Eng. Chem., 2015, 21, 11-25. https://doi.org/10.1016/j.jiec.2014.03.022
- J. Muller, F. Huaux, N. Moreau, P. Misson, J.-F. Heilier, M. Delos, M. Arras, A. Fonseca, J. B. Nagy, and D. Lison, "Respiratory Toxicity of Multi-wall Carbon Nanotubes", Toxicol. Appl. Pharm., 2005, 207, 221-231. https://doi.org/10.1016/j.taap.2005.01.008
- M. Hasani, E. D. Cranston, G. Westman, and D. G. Gray, "Cationic Surface Functionalization of Cellulose Nanocrystals", Soft. Matter., 2008, 4, 2238-2244. https://doi.org/10.1039/b806789a
- Y. Abibi, L. A. Lucia, and O. J. Rojas, "Cellulose Nanocrystals: Chemistry, Self-assembly, and Applications", Chem. Rev., 2010, 110, 3479-3500. https://doi.org/10.1021/cr900339w
- D. Trache, M. H. Hussin, M. M. Haafiz, and V. K. Thakur, "Recent Progress in Cellulose Nanocrystals: Sources and Production", Nanoscale, 2017, 9, 1763-1786. https://doi.org/10.1039/c6nr09494e
- M.-C. Li, Q. Wu, K. Song, C. F. De Hoop, S. Lee, Y. Qing, and Y. Wu, "Cellulose Nanocrystals and Polyanionic Cellulose as Additives in Bentonite Water-based Drilling Fluids: Rheological Modeling and Filtration Mechanisms", Ind. Eng. Chem. Res., 2016, 55, 133-143. https://doi.org/10.1021/acs.iecr.5b03510
- Y. Mo, R. Guo, J. Liu, Y. Lan, Y. Zhang, W. Xue, and Y. Zhang, "Preparation and Properties of PLGA Nanofiber Membranes Reinforced with Cellulose Nanocrystals", Colloids and Surfaces B: Biointerfaces, 2015, 132, 177-184. https://doi.org/10.1016/j.colsurfb.2015.05.029
- Y. Huang, H. Zhan, D. Li, H. Tian, and C. Chang, "Tunicate Cellulose Nanocrystals Modified Commercial Filter Paper for Efficient Oil/water Separation", J. Membr. Sci., 2019, 591, 117362. https://doi.org/10.1016/j.memsci.2019.117362
- J.-W. Lee, T. Yu, C.-W. Park, and Y.-H. Kim, "Interfacial and Bending Properties by Adding HNTs on the Aramid/Basalt Reinforced Epoxy-Based Hybrid Composites", Preprints, 2017, 2017050118.
- R. Salehiyan and K. Hyun, "Effect of Organoclay on Non-linear Rheological Properties of Poly(lactic acid)/poly (caprolactone) Blends", Korean J. Chem. Eng., 2013, 30, 1013-1022. https://doi.org/10.1007/s11814-013-0035-6
- Y. Kim, Y. Song, and H. Kim, "Preparation of Transparent Cellulose Film with Controlled Haze Using Halloysite Nanotubes", Cellulose, 2018, 25, 1239-1248. https://doi.org/10.1007/s10570-017-1625-y
- N. Bleach, S. Nazhat, K. Tanner, M. Kellomaki, and P. Tormala, "Effect of Filler Content on Mechanical and Dynamic Mechanical Properties of Particulate Biphasic Calcium Phosphate-polylactide Composites", Biomaterials, 2002, 23, 1579-1585. https://doi.org/10.1016/S0142-9612(01)00283-6
- K.-H. Kim, J. L. Ong, and O. Okuno, "The Effect of Filler Loading and Morphology on the Mechanical Properties of Contemporary Composites", J. Prosthetic Dent., 2002, 87, 642-649. https://doi.org/10.1067/mpr.2002.125179
- L. Broers, S. van Dongen, V. de Goederen, M. Ton, J. Spaen, C. Boeriu, and K. Schroen, "Addition of Chitin Nanoparticles Improves Polylactic Acid Film Properties", Nanotechnol. Adv. Mater. Sci., 2018, 1, 1-8.