Computers and Concrete

  • 제26권6호
  • /
  • Pages.467-482
  • /
  • 2020
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Analytical post-heating behavior of concrete-filled steel tubular columns containing tire rubber

  • 투고 : 2020.04.19
  • 심사 : 2020.11.19
  • 발행 : 2020.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

This research focused on analyzing the post-fire behavior of high-performance concrete-filled steel tube (CFST) columns, with the concrete containing tire rubber and steel fibers, under axial compressive loading. The finite element (FE) modeling of such heated columns containing recycled aggregate is a branch of this field which has not received the proper attention of researchers. Better understanding the post-fire behavior of these columns by measuring their residual strength and deformation is critical for achieving the minimum repair level required for structures damaged in the fire. Therefore, to develop this model, 19 groups of confined and unconfined specimens with the variables including the volume ratio of steel fibers, tire rubber content, diameter-to-thickness (D/t) ratio of the steel tube, and exposure temperature were considered. The ABAQUS software was employed to model the tested specimens so that the accurate behavior of the FE-modeled specimens could be examined under test conditions. To achieve desirable results for the modeling of the specimens, in addition to the novel procedure described in this research, the modified versions of models presented by previous researchers were also utilized. After the completion of modeling, the load-axial strain and load-lateral strain relationships, ultimate strength, and failure mode of the modeled CFST specimens were evaluated against the test data, through which the satisfactory accuracy of this modeling procedure was established. Afterward, using a parametric study, the effect of factors such as the concrete core strength at different temperatures and the D/t ratio on the behavior of the CFST columns was explored. Finally, the compressive strength values obtained from the FE model were compared with the corresponding values predicted by various codes, the results of which indicated that most codes were conservative in terms of these predictions.

키워드

참고문헌

  1. ABAQUS (1998), User's Manual, Hibbitt, Karlsson, and Sorensen, Inc., Providence, RI, U.S.A.
  2. ACI 209R-02, Prediction of Creep, Shrinkage and Temperature Effects in Concrete Structures.
  3. ACI 318-19 (2019), Building Code Requirements for Reinforced Concrete and Commentary, American Concrete Institute (ACI), Detroit.
  4. Afaghi-Darabi, A. and Abdollahzadeh, G. (2019), "Effect of cooling rate on the post-fire behavior of CFST column", Comput. Concrete, 23(4), 281-294. https://doi.org/10.12989/cac.2019.23.4.281.
  5. AISC 360-16 (2016), Specification for Structural Steel Buildings, American Institute of Steel Construction; Chicago, USA.
  6. ASTM E8 / E8M-16a Standars Test methods for Tension Testing of Metalic Materials.
  7. BS EN 1994-1-1 (2004), Eurocode 4: Design of Composite Steel and Concrete Structures-Part 1-1: General Rules and Rules for Buildings,British Standards Institution, London, UK.
  8. CAN/CSA S16 (2014), Limit States Design of Steel Structures, Canadian Standards Association, Ontario, Canada.
  9. Ekmekyapar, T. and Al-Eliwi, B.J. (2016), "Experimental behaviour of circular concrete filled steel tube columns and design specifications", Thin Wall. Struct., 105, 220-230. https://doi.org/10.1016/j.tws.2016.04.004.
  10. Ekmekyapar, T. and Alhatmey, I.A. (2019), "Post-fire resistance of internally ring stiffened high performance concrete filled steel tube columns", Eng. Struct., 183, 375-388. https://doi.org/10.1016/j.engstruct.2019.01.024.
  11. Giakoumelis, G. and Lam, D. (2004), "Axial capacity of circular concrete-filled tube columns", J. Constr. Steel Res., 60(7), 1049-1068. https://doi.org/10.1016/j.jcsr.2003.10.001.
  12. Han, L.H. and Huo, J.S. (2003), "Concrete-filled hollow structural steel columns after exposure to ISO-834 fire standard", J. Struct. Eng., 129(1), 68-78. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:1(68).
  13. Han, L.H., Huo, J.S. and Wang, Y.C. (2005b), "Compressive and flexural behaviour of concrete filled steel tubes after exposure to standard fire", J. Constr. Steel Res., 61(7), 882-901. https://doi.org/10.1016/j.jcsr.2004.12.005.
  14. Han, L.H., Yang, Y.F., Yang, H. and Huo, J.S. (2002), "Residual strength of concrete-filled RHS columns after exposure to the ISO-834 standard fire", Thin Wall. Struct., 40(12), 991-1012. https://doi.org/10.1016/S0263-8231(02)00044-7.
  15. Han, L.H., Yao, G.H. and Tao, Z. (2007), "Performance of concrete-filled thin-walled steel tubes under pure torsion", Thin Wall. Struct., 45(1), 24-36. https://doi.org/10.1016/j.tws.2007.01.008.
  16. Han, L.H., Yao, G.H. and Zhao, X.L. (2005a), "Tests and calculations for hollow structural steel (HSS) stub columns filled with self-consolidating concrete (SCC)", J. Constr. Steel Res., 61(9), 1241-1269. https://doi.org/10.1016/j.jcsr.2005.01.004.
  17. Han, L.H., Zhao, X.L. and Tao, Z. (2001), "Tests and mechanics model for concrete-filled SHS stub columns, columns and beam-columns", Steel Compos. Struct., 1(1), 51-74. https://doi.org/10.12989/scs.2001.1.1.051.
  18. Han, L.H., Zhao, X.L. and Tao, Z. (2001). "Tests and mechanics model for concrete-filled SHS stub columns, columns and beamcolumns", Steel Compos. Struct., 1(1), 51-74. http://dx.doi.org/10.12989/scs.2001.1.1.051.
  19. Han, L.H., Zhao, X.L., Yang, Y.F. and Feng, J.B. (2003), "Experimental study and calculation of fire resistance of concrete-filled hollow steel columns", J. Struct. Eng., 129(3), 346-356. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:3(346).
  20. Huo, J., Huang, G. and Xiao, Y. (2009), "Effects of sustained axial load and cooling phase on post-fire behaviour of concrete-filled steel tubular stub columns", J. Constr. Steel Res., 65(8-9), 1664- 1676. https://doi.org/10.1016/j.jcsr.2009.04.022.
  21. Ibanez, C., Bisby, L., Rush, D., Romero, M.L. and Hospitaler, A. (2019), "Post-heating response of concrete-filled steel tubular columns under sustained loads", J. Struct., 21(1), 90-102. https://doi.org/10.1016/j.istruc.2019.04.003.
  22. ISO (1975) Fire Resistance Tests-Elements of Building Construction, International Standard ISO 834, Geneva.
  23. Jafarzadeh, H. and Nematzadeh, M. (2020), "Evaluation of post-heating flexural behavior of steel fiber-reinforced high-strength concrete beams reinforced with FRP bars: Experimental and analytical results", Eng. Struct., 225, 111292. https://doi.org/10.1016/j.engstruct.2020.111292.
  24. Karimi, A. and Nematzadeh, M. (2020), "Axial compressive performance of steel tube columns filled with steel fiber-reinforced high strength concrete containing tire aggregate after exposure to high temperatures", Eng. Struct., 219, 110608. https://doi.org/10.1016/j.engstruct.2020.110608.
  25. Kwan, A.K.H., Dong, C.X. and Ho, J.C.M. (2016), "Axial and lateral stress-strain model for circular concrete-filled steel tubes with external steel confinement", Eng. Struct., 117, 528-541. https://doi.org/10.1016/j.engstruct.2016.03.026.
  26. Li, W., Luo, Z., Tao, Z., Duan, W.H. and Shah, S.P. (2017), "Mechanical behavior of recycled aggregate concrete-filled steel tube stub columns after exposure to elevated temperatures", Constr. Build. Mater., 146, 571-581. https://doi.org/10.1016/j.conbuildmat.2017.04.118.
  27. Liu, F., Gardner, L. and Yang, H. (2014), "Post-fire behaviour of reinforced concrete stub columns confined by circular steel tubes", J. Constr. Steel Res., 102, 82-103. https://doi.org/10.1016/j.jcsr.2014.06.015.
  28. Liu, J.Q., Han, L.H. and Zhao, X.L. (2017), "Performance of concrete-filled steel tubular column-wall structure subjected to ISO-834 standard fire: Experimental study and FEA modelling", Thin Wall. Struct., 120, 479-494. https://doi.org/10.1016/j.tws.2017.09.014.
  29. Liu, J.Q., Han, L.H. and Zhao, X.L. (2018), "Performance of concrete-filled steel tubular column-wall structure subjected to ISO-834 standard fire: analytical behavior", Thin Wall. Struct., 129, 28-44. https://doi.org/10.1016/j.tws.2018.03.027.
  30. Lu, H., Zhao, X.L. and Han, L.H. (2009), "Fire behaviour of high strength self-consolidating concrete filled steel tubular stub columns", J. Constr. Steel Res., 65(10-11), 1995-2010. https://doi.org/10.1016/j.jcsr.2009.06.013.
  31. Mousavimehr, M. and Nematzadeh, M. (2020), "Post-heating flexural behavior and durability of hybrid PET-Rubber aggregate concrete", Constr. Build. Mater., 265, 120359. https://doi.org/10.1016/j.conbuildmat.2020.120359.
  32. Nematzadeh, M. and Fazli, S. (2020), "Effect of axial loading conditions and confinement type on concrete-steel composite behavior", Comput. Concrete, 25(2), 95-109. https://doi.org/10.12989/cac.2020.25.2.095.
  33. Nematzadeh, M. and Ghadami, J. (2017), "Evaluation of interfacial shear stress in active steel tube-confined concrete columns", Comput. Concrete, 20(4), 469-481. https://doi.org/10.12989/cac.2017.20.4.469.
  34. Nematzadeh, M. and Haghinejad, A. (2017), "Analysis of actively-confined concrete columns using prestressed steel tubes", Comput. Concrete, 19(5), 477-488. https://doi.org/10.12989/cac.2017.19.5.477.
  35. Nematzadeh, M., Karimi, A. and Fallah-Valukolaee, S. (2020c), "Compressive performance of steel fiber-reinforced rubberized concrete core detached from heated CFST", Constr. Build. Mater., 239, 117832. https://doi.org/10.1016/j.conbuildmat.2019.117832.
  36. Nematzadeh, M., Karimi, A. and Gholampour, A. (2020a), "Pre-and post-heating behavior of concrete-filled steel tube stub columns containing steel fiber and tire rubber", Struct., 27, 2346-2364. https://doi.org/10.1016/j.istruc.2020.07.034.
  37. Nematzadeh, M., Memarzadeh, A. and Karimi, A. (2020b), "Post-fire elastic modulus of rubberized fiber-reinforced concretefilled steel tubular stub columns: Experimental and theoretical study", J. Constr. Steel Res., 175, 106310. https://doi.org/10.1016/j.jcsr.2020.106310.
  38. Nematzadeh, M., Shahmansouri, A.A. and Fakoor, M. (2020d), "Post-fire compressive strength of recycled PET aggregate concrete reinforced with steel fibers: Optimization and prediction via RSM and GEP", Constr. Build. Mater., 252, 119057. https://doi.org/10.1016/j.conbuildmat.2020.119057.
  39. Peng, G.F., Yang, W.W., Zhao, J., Liu, Y.F., Bian, S.H. and Zhao, L.H. (2006), "Explosive spalling and residual mechanical properties of fiber-toughened high-performance concrete subjected to high temperatures", Cement Concrete Res., 36(4), 723-727. https://doi.org/10.1016/j.cemconres.2005.12.014.
  40. Sakino, K., Nakahara, H., Morino, S. and Nishiyama, I. (2004), "Behavior of centrally loaded concrete-filled steel-tube short columns", J. Struct. Eng., 130(2), 180-188. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(180).
  41. Song, Q.Y., Han, L.H., Zhou, K. and Feng, Y. (2018), "Fire resistance of circular concrete-filled steel tubular (CFST) column protected by intumescent coating", J. Constr. Steel Res., 147, 154-170. https://doi.org/10.1016/j.jcsr.2018.03.038.
  42. Song, T.Y., Han, L.H. and Uy, B. (2010), "Performance of CFST column to steel beam joints subjected to simulated fire including the cooling phase", J. Constr. Steel Res., 66(4), 591-604. https://doi.org/10.1016/j.jcsr.2009.12.006.
  43. Tan, Q.H., Han, L.H. and Yu, H.X. (2012), "Fire performance of concrete filled steel tubular (CFST) column to RC beam joints", Fire Saf. J., 51, 68-84. https://doi.org/10.1016/j.firesaf.2012.03.002.
  44. Ukanwa, K.U., Clifton, G.C., Lim, J.B., Hicks, S.J., Sharma, U. and Abu, A. (2018), "Simple design procedure for concrete filled steel tubular columns in fire", Eng. Struct., 155, 144-156. https://doi.org/10.1016/j.engstruct.2017.10.062.
  45. Wei, L.I.U. and Lin-hai, H.A.N. (2006), "Behaviors of concretefilled steel tubes subject axial local compression", China Civil Eng. J., 39(6), 19-27. https://doi.org/10.3321/j.issn:1000-131X.2006.06.004
  46. Xiong, M.X. and Liew, J.R. (2016), "Mechanical behaviour of ultra-high strength concrete at elevated temperatures and fire resistance of ultra-high strength concrete filled steel tubes", Mater. Des., 104, 414-427. https://doi.org/10.1016/j.matdes.2016.05.050.
  47. Yang, H., Han, L.H. and Wang, Y.C. (2008), "Effects of heating and loading histories on post-fire cooling behaviour of concrete-filled steel tubular columns", J. Constr. Steel Res., 64(5), 556-570. https://doi.org/10.1016/j.jcsr.2007.09.007.
  48. Yang, H., Liu, F. and Gardner, L. (2015), "Post-fire behaviour of slender reinforced concrete columns confined by circular steel tubes", Thin Wall. Struct., 87, 12-29. https://doi.org/10.1016/j.tws.2014.10.014.
  49. Yao, Y. and Hu, X.X. (2015), "Cooling behavior and residual strength of post-fire concrete filled steel tubular columns", J. Constr. Steel Res., 112, 282-292. https://doi.org/10.1016/j.jcsr.2015.05.020.
  50. Zhu, W.C., Ling, L., Tang, C.A., Kang, Y.M. and Xie, L.M. (2012), "The 3 D-numerical simulation on failure process of concrete-filled tubular (CFT) stub columns under uniaxial compression", Comput. Concrete, 9(4), 257-273. https://doi.org/10.12989/cac.2012.9.4.257.