참고문헌
- Kim, J. W., Jang, J. S., Yang, M. S., Kang, J. H., Kim, K. W., Cho, Y. J. and Lee, J. W., "A Study on Fault Classification of Machining Center using Acceleration Data Based on 1D CNN Algorithm," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 9, pp. 29-35, 2019. https://doi.org/10.14775/ksmpe.2019.18.9.029
- Choi, H., Kim, T. K., Heo, G. R., Choi, S. D., and Hur, J. W., "Study of Fuel Pump Failure Prognostic Based o Machine Learning Using Artificial Neural Network," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 9, pp. 52-57, 2019.
- Kim, J. M., Choi, C. W., and Jang, W. S., "Development of Robot Vision Control Schemes based on Batch Method for Tracking of Moving Rigid Body Target," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 5, pp. 161-172, 2018. https://doi.org/10.14775/ksmpe.2018.17.5.161
- Kim, J. M., Choi, C. W. and Jang, W. S., "Development of Robot Vision Control Schemes based on Batch Method for Tracking of Moving Rigid Body Target," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 5, pp. 161-172, 2018. https://doi.org/10.14775/ksmpe.2018.17.5.161
- Kang, I. P., Choi, B. G., and Kim, S. Y., "Human-robot Interaction using Flexible Tactile Sensor Technology," Journal of the KSME, Vol. 59, No. 9, pp. 24-27, 2019.
- Yoon, S. H., Baek, S. H. and Kim, C. W., "Design and Implementation of a Readout Circuit for a Tactile Sensor Pad Based on Force Sensing Resistors," Journal of the Korean Sensors Society, Vol. 26, No. 5, pp. 331-337, 2017.
- Park, S. C., Kim, H. C., Kim, S. Y., Lee, I. H., Lim, S. K. and Yun, H. Y., "Development of Flexible Tactile Sensor using Direct Draw Method and Improvement of Stability," Transactions of the Korean Society of Mechanical Engineers A, Vol. 42, No. 8, pp. 701-708, 2018. https://doi.org/10.3795/KSME-A.2018.42.8.701
- Park, S. C., Lee, I. H., Bae, Y. H., and Kim, H. C., "Optimization of Manufacturing Conditions of Pressure-Sensitive Ink Based on MWCNTs," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 8, pp. 1-7, 2019. https://doi.org/10.14775/ksmpe.2019.18.8.001
- Kim, J. D., Bae, Y. H., Lee, I. H. and Kim, H. C., "Output Characteristics of Printed Flexible Tactile Sensors Connected to Brass Terminals," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 19, No. 4, pp. 65-70, 2020. https://doi.org/10.14775/ksmpe.2020.19.04.065
- Kim, C. M., Seo, J. W., Yoo, Y. E., Choi, D. S., Kim, S. K., and Jung, C. Y., "Study of dispersion of Multi-Walled Carbon Nanotubes with Injection Molding Process Condition," Proceedings of KSPE 2011 spring, pp. 487-488, 2011.
- Hwang, B. Y., Kim, J. H., Kim, D. J. and Lee, H. J., "A study on electromechanical properties of CNT conductive film deposited on flexible substrate depending on the dispersion conditions," Proceedings of The KSME 2011 autumn, pp. 2929-2932, 2011.
- Yun, J. J. and Lee, W. J., "Determination of Thin Film Thickness by EDS Analysis and its Modeling," Journal of the Korean Institute of Electrical and Electronic Material Engineers, Vol. 24, No. 8, pp. 647-653, 2011. https://doi.org/10.4313/JKEM.2011.24.8.647