Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Finite Element Analysis Approach for the Stress of Digging Part of Garlic Harvesters

유한요소해석을 이용한 마늘 수확기 굴취부의 응력분석

  • Kim, Kyu-Bong (Department of Bio-Industrial Machinery Engineering, Jeonbuk National University) ;
  • Lee, Myung-Hee (Department of Bio-Industrial Machinery Engineering, Jeonbuk National University) ;
  • Kim, Dae-Cheol (Department of Bio-Industrial Machinery Engineering, Jeonbuk National University) ;
  • Cho, Yongjin (Department of Bio-Industrial Machinery Engineering, Jeonbuk National University)
  • 김규봉 (전북대학교 생물산업기계공학과) ;
  • 이명희 (전북대학교 생물산업기계공학과) ;
  • 김대철 (전북대학교 생물산업기계공학과) ;
  • 조용진 (전북대학교 생물산업기계공학과)
  • Received : 2020.06.22
  • Accepted : 2020.08.23
  • Published : 2020.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

A stress analysis was performed to verify the stability of the digging part of a garlic harvester. A finite element analysis was performed to examine the distribution and concentrated loads on the digging part of the blade and contact plate. Moreover, the stability and maximum deformation of the digging part were determined. Under a distributed load, the maximum principal stress, total deformation, and minimum safety factor ranged from 64-128 MPa, 0.35-0.70 mm, and 2.9-5.7, respectively. The analysis results for the distribution load indicated that the maximum stress occurred at the center of the blade. In contrast, under the concentrated load, the maximum principal stress, total deformation, and minimum safety factor ranged from 66-247 MPa, 0.35-0.79 mm, 1.48-5.53, respectively. The analysis results for the concentrated load indicated that stress and deformation were larger toward the edge and center, respectively.

Keywords

References

  1. "Main production area of Garlic," Retrieved 2020.06.11., from http://kosis.kr.
  2. Characteristics of Dealings and shipment strategic in garlic, "Retrieved 2020.07.06., from http://www.nongsaro.go.kr
  3. Choi, D. K., "Development of a Garlic Clove Planter," A Thesis for a Master's, Chungbuk National University, Republic of Korea, 2005.
  4. Kim, S. B., "On the Development of Autonomous Driving System of Garlic Seeder Robot Using RTK-GPS," A Thesis for a Master's, Jeonbuk National University, Republic of Korea, 2019.
  5. Ha, J., Lee, C., Pal, A., Park, G. and Kim, H., "Development of Optimized Headland Turning Mechanism on an Agricultural Robot for Korean Garlic Farms," Journal of Biosystem Engineering, Vol. 43, No. 4, pp. 273-284, 2018. https://doi.org/10.5307/JBE.2018.43.4.273
  6. Park, D., Lee, C. G., Park, H., Baek, S. H., & Rhee, J. Y., "Discrete Element Method Analysis of the Impact Forces on a Garlic Bulb by the Roller of a Garlic Harvester", Journal of Biosystem Engineering, Vol. 44, No. 4, pp. 208-217, 2019. https://doi.org/10.1007/s42853-019-00031-z
  7. Kim, T. H., Lee, M. H., Cho, Y. J. and Kim, D. C "Stress Analysis of Digging Blade of Gathering Type Garlic Harvester," Proc. of Korean Society for Agricultural Machinety, Vol. 23, No. 2, pp. 191, 2018.
  8. Lee, M. H., Kim, K. B., Kim, Y. K., Choi, I. S., Cho, Y. J. and Kim, D. C "Structural Analysis of Digging Part of Gathering Type Garlic Harvester," Proc. of Korean Society for Agricultural Machinety, Vol. 24, No. 2, pp. 88, 2019.
  9. Kim, S. H., "(An) Experimental Study for the Fatigue Assessment of Fillet Welds Using Structural Stress," A Thesis for a Doctorate, Pusan National University, Republic of Korea, 2005.
  10. Askari, M., Komarizade, M. H., Nikbakht, A. M., Nobakht, N., and Teimourlou, R. F. "A novel three-point hitch dynamometer to measure the draft requirement of mounted implements", Research in Agricultural Engineering, Vol. 55, No. 4, pp. 128-136, 2011.
  11. Kim, C. W., Yoo, J. I., Roh,, H. W., Hur, J. W. and Choi, S. D., " Stability Evaluation of Pneumatic Conveyor through Finite Element Analysis," Proc. of the Korean Society of Manufacturing Process Engineers, Vol. 2019, No. 4, pp. 250 , 2019.
  12. Ansys workbench 16.0. 2015
  13. Park, W. Y., Kim, L. Y., Kim, J. D. and Lee, K. S., "Soil Physical Properties and Traction Characteristics of Non-tilled Paddy Field," Journal of Korea Science and Fertilizer, Vol. 36, No. 6, 2003.