References
- Abambres, M., Quach, W. M. (2016). "Residual stresses in steel members: A review of available analytical expressions." Int. J. Struct. Integr., 7(1), 70-94. https://doi.org/10.1108/IJSI-12-2014-0070
- Bu, Y., Gardner, L. (2019). "Finite element modelling and design of welded stainless steel I-section columns." J. Constr. Steel Res., 152, 57-67. https://doi.org/10.1016/j.jcsr.2018.03.026
- Chan, J., Chen, J., Jin, W. L. (2010). "Experiment investigation of stress concentration factor of concrete-filled tubular T joints." J. Constr. Steel Res., 66(12), 1510-1515. https://doi.org/10.1016/j.jcsr.2010.06.004
- Chen, C. C., Lin, C. C., Tsai, C. L. (2004). "Evaluation of reinforced connections between steel beams and box columns." Eng. Struct., 26(13), 1889-1904. https://doi.org/10.1016/j.engstruct.2004.06.017
- Chen, M. cheng, Wen, Q. qing, Zhu, Q., Huang, H., Xie, L. (2017). "Simulation of corrosion process for concrete filled steel tubular columns with the cellular automata method." Eng. Fail. Anal., 82, 298-307. https://doi.org/10.1016/j.engfailanal.2017.06.006
- Choi, I., Kim, J. H., Kim, H.-R. (2015). "Composite Behavior of Insulated Concrete Sandwich Wall Panels Subjected to Wind Pressure and Suction." Materials (Basel)., 8, 1264-1282. https://doi.org/10.3390/ma8031264
- Choi, I., Kim, J. H., You, Y.-C. (2016). "Effect of cyclic loading on composite behavior of insulated concrete sandwich wall panels with GFRP shear connectors." Compos. Part B Eng., 96, 7-19. https://doi.org/10.1016/j.compositesb.2016.04.030
- Choi, S., Lee, S., Hong, S., Kim, J. (2008). "Structural capacities of tension side for CFT square column-to-beam connections with combined-cross diaphragm." Adv. Struct. Eng., 11(2), 209-227. https://doi.org/10.1260/136943308784466251
- ECCS. (1976). Manual on stability of steel structures - Part 2.2. Mechanical properties and residual stresses. European Convention for Constructional Steelwork, Brussels.
- ECCS. (1984). Ultimate limit states calculations of sway frames with rigid joints. European Convention for Constructional Steelwork, Brussels.
- Galambos, T. V, Ketter, R. L. (1959). "Columns under combined bending and thrust." J. Eng. Mech. Div., 85(2), 1-30. https://doi.org/10.1061/JMCEA3.0000084
- Gardner, L., Bu, Y., Theofanous, M. (2016). "Laser-welded stainless steel I-sections: Residual stress measurements and column buckling tests." Eng. Struct., 127, 536-548. https://doi.org/10.1016/j.engstruct.2016.08.057
- Gupta, P. K., Singh, H. (2014). "Numerical study of confinement in short concrete filled steel tube columns." Lat. Am. J. Solids Struct., 11(8), 1445-1462. https://doi.org/10.1590/S1679-78252014000800010
- Hajjar, J. F., Schiller, P. H., Molodan, A. (1998). "A distributed plasticity model for concrete-filled steel tube beam-columns with interlayer slip." Eng. Struct., 20(8), 663-676. https://doi.org/10.1016/S0141-0296(97)00107-7
- Huang, C., Yeh, Y.-K., Liu, G.-Y., Hu, H.-T., Tsai, K., Weng, Y., Wang, S., Wu, M.-H. (2002). "Axial Load Behavior of Stiffened Concrete-Filled Steel Columns." J. Struct. Eng., 128(9), 1222-1230. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:9(1222)
- Kang, L., Leon, R. T., Lu, X. (2014). "A general analytical model for steel beam-to-CFT column connections in OpenSEES." J. Constr. Steel Res., 100, 82-96. https://doi.org/10.1016/j.jcsr.2014.04.022
- Kim, J. H., Ghaboussi, J., Elnashai, A. S. (2010). "Mechanical and informational modeling of steel beam-to-column connections." Eng. Struct., 32(2), 449-458. https://doi.org/10.1016/j.engstruct.2009.10.007
- Kim, J. H., Ghaboussi, J., Elnashai, A. S. (2012). "Hysteretic mechanical-informational modeling of bolted steel frame connections." Eng. Struct., 45, 1-11. https://doi.org/10.1016/j.engstruct.2012.06.014
- Kim, J. H., You, Y.-C. (2015). "Composite Behavior of a Novel Insulated Concrete Sandwich Wall Panel Reinforced with GFRP Shear Grids: Effects of Insulation Types." Materials (Basel)., 8, 899-913. https://doi.org/10.3390/ma8030899
- Kim, Y.-J., Shin, K.-J., Kim, W.-J. (2008). "Effect of Stiffener Details on Behavior of CFT Column-to-Beam Connections." Steel Struct., 8(2), 119-133.
- Kuranovas, A., Kvedaras, A. K. (2007). "Behaviour of hollow concrete?filled steel tubular composite elements." J. Civ. Eng. Manag., 13(2), 131-141. https://doi.org/10.3846/13923730.2007.9636429
- Lee, S. H., Yang, I.-S., Choi, S.-M. (2010). "Structural characteristics of welded built-up square CFT column-to-beam connections with external diaphragms." Steel Compos. Struct., 10(3), 261-279. https://doi.org/10.12989/scs.2010.10.3.261
- Long, H., Gery, D., Carlier, A., Maropoulos, P. G. (2009). "Prediction of welding distortion in butt joint of thin plates." Mater. Des., 30(10), 4126-4135. https://doi.org/10.1016/j.matdes.2009.05.004
- Mirghaderi, S. R., Torabian, S., Keshavarzi, F. (2010). "I-beam to box-column connection by a vertical plate passing through the column." Eng. Struct., 32(8), 2034-2048. https://doi.org/10.1016/j.engstruct.2010.03.002
- Musa, I. A., Mashiri, F. R., Zhu, X., Tong, L. (2018). "Experimental stress concentration factor in concrete-filled steel tubular T-joints." J. Constr. Steel Res., 150, 442-451 https://doi.org/10.1016/j.jcsr.2018.09.001
- Qin, Y., Chen, Z., Wang, X. (2014a). "Experimental investigation of new internal-diaphragm connections to CFT columns under cyclic loading." J. Constr. Steel Res., 98, 35-44. https://doi.org/10.1016/j.jcsr.2014.02.014
- Qin, Y., Chen, Z., Wang, X., Zhou, T. (2014b). "Seismic behavior of through-diaphragm connections between CFRT columns and steel beams-experimental study." Adv. Steel Constr., 10(3), 351-371.
- Qin, Y., Chen, Z., Yang, Q., Shang, K. (2014c). "Experimental seismic behavior of through-diaphragm connections to concrete-filled rectangular steel tubular columns." J. Constr. Steel Res., 93, 32-43. https://doi.org/10.1016/j.jcsr.2013.10.020
- Sakino, K., Nakahara, H., Morino, S., Nishiyama, I. (2004). "Behavior of Centrally Loaded Concrete-Filled SteelTube Short Columns." J. Struct. Eng., 130(2), 180-188. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(180)
- Samarakkody, D. I., Thambiratnam, D. P., Chan, T. H. T., Moragaspitiya, P. H. N. (2017). "Differential axial shortening and its effects in high rise buildings with composite concrete filled tube columns." Constr. Build. Mater., 143, 659-672. https://doi.org/10.1016/j.conbuildmat.2016.11.091
- Sewel, J. S. (1902). "Column for Buildings." Eng. News, 48(17), 36-39.
- Shin, K.-J., Kim, Y.-J., Oh, Y.-S., Moon, T.-S. (2004). "Behavior of welded CFT column to H-beam connections with external stiffeners." Eng. Struct., 26(13), 1877-1887. https://doi.org/10.1016/j.engstruct.2004.06.016
- Srinivasan, C. N., Schneider, S. P. (1999). "Axially Loaded Concrete-Filled Steel Tubes." J. Struct. Eng., 125(10), 1202-1206. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:10(1202)
- KATS. (2014). "Rolled steels for welded structures (KS D 3515)." Korean Agency for Technology and Standards.
- Torabian, S., Mirghaderi, S. R., Keshavarzi, F. (2012). "Moment-connection between I-beam and built-up square column by a diagonal through plate." J. Constr. Steel Res., 70, 385-401. https://doi.org/10.1016/j.jcsr.2011.10.017
- Xiao, Y., Zhang, Z., Hu, J., Kunnath, S. K., Guo, P. (2011). "Seismic Behavior of CFT Column and Steel Pile Footings." J. Bridg. Eng., 16(5), 575-586. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000198
- Yang, B., Nie, S., Xiong, G., Hu, Y., Bai, J., Zhang, W., Dai, G. (2016). "Residual stresses in welded I-shaped sections fabricated from Q460GJ structural steel plates." J. Constr. Steel Res., 122, 261-273. https://doi.org/10.1016/j.jcsr.2016.03.029
- Young, B., Ellobody, E. (2006). "Experimental investigation of concrete-filled cold-formed high strength stainless steel tube columns." J. Constr. Steel Res., 62(5), 484-492. https://doi.org/10.1016/j.jcsr.2005.08.004
- Young, B. W. (1972). "Residual stresses in hot-rolled members." IABSE Int. Colloq. column strength, University of Cambridge.
- Young, B. W., Schulz, G. W. (1977). "Mechanical properties and residual stresses." Second Int. Colloqium Stab. Steel Struct. Liege Introd. Report, ECCS IABSE.
- Zeinizadeh Jeddi, M., Ramli Sulong, N. H., Arabnejad Khanouki, M. M. (2017). "Seismic performance of a new through rib stiffener beam connection to concrete-filled steel tubular columns: An experimental study." Eng. Struct., 131, 477-491. https://doi.org/10.1016/j.engstruct.2016.10.038