Geomechanics and Engineering

  • 제23권6호
  • /
  • Pages.503-512
  • /
  • 2020
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Thermographic analysis of failure for different rock types under uniaxial loading

  • Kirmaci, Alper (Department of Mining Engineering, Middle East Technical University) ;
  • Erkayaoglu, Mustafa (Department of Mining Engineering, Middle East Technical University)
  • 투고 : 2020.02.04
  • 심사 : 2020.12.09
  • 발행 : 2020.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

Mining activities focus on the production of mineral resources for energy generation and raw material requirements worldwide and it is a known fact that shallow reserves become scarce. For this reason, exploration of new resources proceeds consistently to meet the increasing energy and raw material demand of industrial activities. Rock mechanics has a vital role in underground mining and surface mining. Devices and instruments used in laboratory testing to determine rock mechanics related parameters might have limited sensing capability of the failure behavior. However, methodologies such as, thermal cameras, digital speckle correlation method and acoustic emission might enable to investigate the initial crack formation in detail. Regarding this, in this study, thermographic analysis was performed to analyze the failure behaviors of different types of rock specimens during uniaxial compressive strength experiments. The energy dissipation profiles of different types of rocks were characterized by the temperature difference recorded with an infrared thermal camera during experiments. The temperature increase at the failure moment was detected as 4.45℃ and 9.58℃ for andesite and gneiss-schist specimens, respectively. Higher temperature increase was observed with respect to higher UCS value. Besides, a temperature decreases of about 0.5-0.6℃ was recorded during the experiments of the marble specimens. The temperature change on the specimen is related to release of radiation energy. As a result of the porosity tests, it was observed that increase in the porosity rate from 5.65% to 20.97% can be associated to higher radiation energy released, from 12.68 kJ to 297.18 kJ.

키워드

과제정보

The research described in this paper was financially supported by the Middle East Technical University, Scientific Research Project GAP-305-2018-2724.

참고문헌

  1. Abuel-Naga, H.M., Bouazza, A. and Gates, W. (2013), "Impact of bentonite form on the thermal evolution of the hydraulic conductivity of geosynthetic clay liners", Geotechnique Lett., 3(2), 26-30. https://doi.org/10.1680/geolett.13.007.
  2. Antony, S.J., Olugbenga, A., Ozerkan, N., Marumoame, O. and Okeke, G. (2017), "Sensing temperature and stress distributions on rock samples under mechanical", Proceedings of the 15th Biennial ASCE Conference on Engineering, Science, Construction, and Operations in Challenging Environments, Orlando, Florida, U.S.A., April.
  3. Aydan, O. and Ulusay, R. (2013), "Geomechanical evaluation of derinkuyu antique underground city and its implications in geoengineering", Rock Mech. Rock Eng., 46(4), 731-754. https://doi.org/10.1007/s00603-012-0301-7
  4. Aydan, O., Manav, H., Yaoita, T. and Yagi, M. (2014), "Multi-parameter thermo-dynamic response of minerals and rocks during deformation and fracturing", Proceedings of the ISRM International Symposium - 8th Asian Rock Mechanics Symposium, Japan, Sapporo, October.
  5. Cermak, V. and Rybach, L. (1982), Thermal Conductivity and Specific Heat of Minerals and Rocks, in Geophysics- Physical Properties of Rocks, Springer, 305-343.
  6. Chen, G., Li, T., Wang, W., Guo, F. and Yin, H. (2017), "Characterization of the brittleness of hard rock at different temperatures using uniaxial compression tests", Geomech. Eng., 13(1), 63-77. https://doi.org/10.12989/gae.2017.13.1.063
  7. Deb, D. and Verma, A.K. (2016), Fundamentals and Applications of Rock Mechanics, PHI Learning, New Delhi, India.
  8. Go, G.H., Lee, S.R., Kim, Y.S., Park, H.K. and Yoon, S. (2014), "A new thermal conductivity estimation model for weathered granite soils in Korea", Geomech. Eng., 6(4), 359-376. http://doi.org/10.12989/gae.2014.6.4.359.
  9. Gui, Y.L., Zhao, Z.Y., Ji, J., Wang, X.M., Zhou, K.P. and Ma, S.Q. (2016), "The grain effect of intact rock modelling using discrete element method with Voroni grains", Geotechnique Lett., 6(2), 136-143. https://doi.org/10.1680/jgele.16.00005.
  10. He, M., Sousa, R., Miranda, T. and Zhu, G. (2015), "Rockburst laboratory tests database- Application of data mining techniques", Eng. Geol., 185, 116-130. https://doi.org/10.1016/j.enggeo.2014.12.008.
  11. Hong-lin, M. (2013), "Rock mechanical behaviors testing by digital speckle correlation method", J. Appl. Optics, 34, 123-127. https://doi.org/10.5768/JAO201334.0103006
  12. Jin, G.C., Wu, Z., Bao, N.K. and Yao, X.F. (2003), "Digital speckle correlation method with compensation technique for strain field measurements", Opt. Lasers Eng., 39, 457-464. https://doi.org/10.1016/S0143-8166(02)00028-3.
  13. Kong, B., Wang, E. and Li, Z. (2018), "Regularity and coupling correlation between acoustic emission and electromagnetic radiation during rock heating process", Geomech. Eng., 15(5), 1125-1133. https://doi.org/10.12989/gae.2018.15.5.1125.
  14. Lee, S.J., Kim, K.Y., Choi, J.C. and Kwon, T.H. (2016), "Experimental investigation on the variation of thermal conductivity of soils with effective stress, porosity, and water saturation", Geomech. Eng., 11(6), 771-785. http://doi.org/10.12989/gae.2016.11.6.771.
  15. Lou, Q. and He, X. (2018), "Experimental study on infrared radiation temperature field of concrete under uniaxial compression", Infrared Phys. Techn., 90, 20-30. https://doi.org/10.1016/j.infrared.2018.01.033.
  16. Ma, S., Wang, L. and Jin, G. (2006), "Damage evolution inspection of rock using digital speckle correlation method (DSCM)", Key Eng. Mater., 326, 1117-1120. https://doi.org/10.4028/www.scientific.net/KEM.326-328.1117.
  17. Ma, S.P., Xu, X.H. and Zhao, Y.H. (2004), "The Geo-DSCM system and its application to the deformation", Int. J. Rock Mech. Min. Sci., 41, 292-297. https://doi.org/10.1016/j.ijrmms.2004.03.056.
  18. Pappalardo, G., Mineo, S., Zampelli, S.P., Cubito, A. and Calcaterra, D. (2016), "Infrared thermography proposed for the estimation of the cooling rate index in the remote survey of rock masses", Int. J. Rock Mech. Min. Sci., 83, 182-196. https://doi.org/10.1016/j.ijrmms.2016.01.010.
  19. Pasten, C., Garcia, M. and Carlos Santamarina, J. (2015), "Thermo-mechanical ratcheting in jointed rock masses", Geotechnique Lett., 5(2), 86-90. https://doi.org/10.1680/geolett.14.00118.
  20. Read, R.S. (2004), "20 years of excavation response studies at AECL's underground research laboratory", Int. J. Rock Mech. Min. Sci., 41(8), 1251-1275. https://doi.org/10.1016/j.ijrmms.2004.09.012.
  21. Salami, Y., Dana, C. and Hicher, P.Y. (2017), "Infrared thermography of rock fracture", Geotech. Lett., 7(1), 1-5. https://doi.org/10.1680/jgele.16.00131.
  22. Tan, Y.Z., Liu, Y.X., Wang, P.Y. and Zhang, Y. (2016), "A predicting model for thermal conductivity of high permeability-high strength concrete materials", Geomech. Eng., 10(1), 46-57. https://doi.org/10.12989/gae.2016.10.1.049.
  23. Tan, Z.H., Tang, C.A. and Zhu, W. (2007), "Infrared thermal image study on failure of granite with hole", Key Eng. Mater., 353, 2313-2316. https://doi.org/10.4028/www.scientific.net/KEM.353-358.2313.
  24. Ulusay, R., Aydan, O., Gercek, H., Hindistan, M.A. and Tuncay, E. (2016), Rock Mechanics and Rock Engineering: From the Past to the Future, CRC Press, London, U.K.
  25. Vollmer, M. and Mollmann, K.P. (2017), Infrared Thermal Imaging: Fundamentals, Research and Applications, John Wiley & Sons, Weinheim, Germany.
  26. Wang, C., Lu, Z., Liu, L., Chuai, X. and Lu, H. (2016), "Predicting points of the infrared precursor for limestone failure under uniaxial compression", Int. J. Rock Mech. Min. Sci., 88(10), 34-43. https://doi.org/10.1016/j.ijrmms.2016.07.004.
  27. Wu, L., Liu, S., Wu, Y. and Wang, C. (2006), "Precursors for rock fracturing and failure-Part I: IRR image abnormalities", Int. J. Rock Mech. Min. Sci., 43(3), 473-482. https://doi.org/10.1016/j.ijrmms.2005.09.002.
  28. Xie, H., Li, L., Peng, R. and Ju, Y. (2009), "Energy analysis and criteria for structural failure of rocks", J. Rock Mech. Geotech. Eng., 1(1), 11-20. https://doi.org/10.3724/SP.J.1235.2009.00011.
  29. Yin, T., Li, X., Cao, W. and Xia, K. (2015), "Effects of thermal treatment on tensile strength of Laurentian granite using Brazilian test", Rock Mech. Rock Eng., 48(6), 2213-2223. https://doi.org/10.1007/s00603-015-0712-3.
  30. Yin, T., Zhang, S., Li, X. and Bai, L. (2018), "Evolution of dynamic mechanical properties of heated granite subjected to rapid cooling", Geomech. Eng., 16(5), 483-493. https://doi.org/10.12989/gae.2018.16.5.483.
  31. Young, R.P. and Collins, D.S. (2001), "Seismic studies of rock fracture at the underground research laboratory, Canada", Int. J. Rock Mech. Min. Sci., 38(6), 787-799. https://doi.org/10.1016/S1365-1609(01)00043-0.
  32. Zhang, Q.B. and Zhao, J. (2014), "A review of dynamic experimental techniques and mechanical behaviour of rock materials", Rock Mech. Rock Eng., 47(4), 1411-1478. https://doi.org/10.1007/s00603-013-0463-y.

피인용 문헌

  1. Analysis of strength property and pore characteristics of Taihang limestone using X-ray computed tomography at high temperatures vol.11, pp.1, 2020, https://doi.org/10.1038/s41598-021-92928-z