대한조선학회논문집 (Journal of the Society of Naval Architects of Korea)

  • 제57권5호
  • /
  • Pages.254-261
  • /
  • 2020
  • /
  • 1225-1143(pISSN)
  • /
  • 2287-7355(eISSN)
대한조선학회 (The Society of Naval Architects of Korea)
권호 표지
DOI QR코드

DOI QR Code

유한요소해석과 실험에 의한 유압 윈치 드럼의 응력 계산 및 수명 예측

Life Prediction and Stress Evaluation of Hydraulic Winch Drum by Finite Element Analysis and Experiment

  • 투고 : 2020.02.20
  • 심사 : 2020.05.19
  • 발행 : 2020.10.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The structural safety of hydraulic winch drum and the gears are estimated by the Finite Element Analysis (FEA) and the winch operation experiment. The mesh convergence test is performed and the applied force is the pressure on the drum converted from the rope tension in working condition. The stress of the drum calculated from the strain values of the winch operation experiment shows the agreement with that from the FEA. Most stress values are under the yield strength except for the small hole made for the wire rope fixation. The life of bearings in the drum is calculated using the life prediction formula with the reaction forces from the operation load. One of the two ball bearings shows the short life for impact condition, yet the real prototype winch system shows more life than the numerical value.

키워드

참고문헌

  1. ASME BPVC, 2010, Section VIII, Division 1; Rules for construction of pressure vessels.
  2. Bearings table, NSK, https://www.nsk.com/ [Accessed Dec. 2019].
  3. Bhandari, V. B., 2010. Design of machine elements third edition, The McGraw-Hill Companies.
  4. Chen, P.W., Wang, Z., Ding X.L., Shi, Y.Y., Zhou, S.J., Lu C. & Zheng J., 2016. Analysis on the structure strength of the marine winch's roller, 2nd International Conference on Control Science and Systems Engineering.
  5. Choi, H.J., Lee, J.H., Kim, J.M., Lee, S.G. & Maring K., 2016. The design, structural analysis and high pressure chamber test of a thick pressure cylinder for 2000m water eepth. 2016. Journal of the Society of Naval Architecture of Korea, V. 53(2), pp.143-153.
  6. Corradi, L., Cammi, A. & Luzzi, L., 2011. Collapse behavior of moderately thick tubes pressurized from outside. Nuclear Power - Control, Reliability and Human Factors, Chapter 14, pp.257-274.
  7. Digvijay, D. P. & Kiran, M. N., 2015. Design and finite element analysis of rope drum and drum shaft for lifted material loading condition. International Engineering Research Journal (IERJ), Special Issue 2, pp.2034-2040.
  8. DNV 2008, Standard for Certification of Lifting Appliances, No 2.22.
  9. Hirpa, G. L., 2011, Design verification of winch for offshore crane, 15th International Research/Expert Conference, Trends in the Development of Machinery and Associated Technology, Prague, Czech Republic.
  10. Lee, J.H., Kim, Y.J. & Mun, B.C., 2019. The earthquake safety assessment of 1000 kVA cast resin transformer by finite element analysis with mesh convergence and seismic test on the large shaking table under Korean and IEEE seismic standards. Journal of Electrical Engineering & Technology. 14, pp.1223-1233. https://doi.org/10.1007/s42835-019-00125-w
  11. Lee, J.H. & Park, B.J., 2019. The analysis of collapse load of thick pressure cylinder under hydrostatic pressure. Journal of the Society of Naval Architecture of Korea, 56(2), pp. 175-186. https://doi.org/10.3744/SNAK.2019.56.2.175
  12. Lee, J.H. & Park, B.J., 2019. The nonlinear buckling finite element analysis to determine the dimension of thick cylinder under hydrostatic pressure. Journal of Ocean Engineering and Technology, 33(3), pp.272-279. https://doi.org/10.26748/KSOE.2018.099
  13. Richard, G. B. & J. Keith, N., 2010, Shigley's mechanical engineering design 9th Ed., Chapter 11, McGraw Hill.