Korean Chemical Engineering Research

  • 제57권6호
  • /
  • Pages.812-825
  • /
  • 2019
  • /
  • 0304-128X(pISSN)
  • /
  • 2233-9558(eISSN)
한국화학공학회 (The Korean Institute of Chemical Engineers)
권호 표지
DOI QR코드

DOI QR Code

강산성 양이온 교환수지를 통한 백운석으로부터 CaCO3 및 MgO/Mg(OH)2 합성에 관한 연구

A Study on Synthesis of CaCO3 & MgO/Mg(OH)2 from Dolomite Using the Strong Acidic Cation Exchange Resin

  • 황대주 ((재)한국석회석신소재연구소 연구개발부) ;
  • 유영환 ((재)한국석회석신소재연구소 연구개발부)
  • 투고 : 2019.07.01
  • 심사 : 2019.09.19
  • 발행 : 2019.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

국내에서 채광되는 백운석(dolomite, $CaMg(CO_3)_2$)을 회분식 형태의 마이크로웨이브 소성로($950^{\circ}C/60min$)에 의해 소성하여 경소백운석($CaO{\cdot}MgO$)을 제조하였다. 국내에서 산출된 두 개의 백운석 시료를 대상으로 경소백운석($CaO{\cdot}MgO$) 제조 후 수화 특성을 규명한 결과 반응성이 다름을 규명하였다. 경소백운석($CaO{\cdot}MgO$)의 수화 특성의 반응성을 이용하여 강산성 양이온 교환수지와 반응 시켜서 MgO를 분리하는 조건을 실시하였다. 분리 실험 조건은 경소백운석($CaO{\cdot}MgO$)과 $R-SO_3H$ (1:12 mass %)로 칼슘이온 흡착($Ca-(R-SO_3)_2$)하여 MgO를 분리하였다. 분리 후 MgO의 함량은 94 mass % 이상으로 분리되었다. 분리된 MgO를 $950^{\circ}C$, 60 min 동안 열처리 후 MgO의 순도는 96 mass %로 나타났다. 그리고칼슘 이온이 흡착된강산성 양이온교환수지($Ca-(R-SO_3)_2$)와 NaOH, $CO_2$ gas 반응에 의해서 98 mass %의 $CaCO_3$를 합성하였다.

Two dolomite samples mined from the different mines were calcined using a batch-type microwave kiln ($950/60min^{\circ}C$) to produce $CaO{\cdot}MgO$. The hydration of the $CaO{\cdot}MgO$ samples shows different reactivity. MgO was separated by reacting with a strong acid cation exchange resin using the reactivity of the hydration properties of light dolomite ($CaO{\cdot}MgO$). Calcium ($Ca-(R-SO_3)_2$) was separated from the prepared $CaO{\cdot}MgO$ by the cation exchange resin ($CaO{\cdot}MgO:R-SO_3H=1:12mass%$). High purity MgO (higher than 94 mass %) with unburned $CaCO_3$ (1~2 mass %) was obtained by the separation process. The separated MgO was heated at $950^{\circ}C$ for 60 minutes to afford high purity MgO with MgO content higher than 96%. And High-grade $CaCO_3$ was prepared from the reaction with calcium adsorbed resin ($Ca-(R-SO_3)_2$) and NaOH, $CO_2$ gas.

키워드

참고문헌

  1. Hwang, D. J., Ryu, J. Y. and Park, J. H., "Calcination of Megacrystalline Calcite Using Microwave and Electric Furnaces," J. Ind. Eng. Chem., 18(6), 1956-1963(2012). https://doi.org/10.1016/j.jiec.2012.05.011
  2. Hwang, D. J., Ryu, J. Y. and Park, J. H., "Preparation of $CaCO_3$ Using Mega-crystalline Calcite in Electrical Furnace and Batch Type Microwave Kiln," J. Ind. Eng. Chem, 19(5), 1507-1516(2013). https://doi.org/10.1016/j.jiec.2013.01.017
  3. Hwang, D. J., Ryu, J. Y. and Yu, Y. H., "Characteristics of Precipitated Calcium Carbonate by Hydrothermal and Carbonation Processes with Mega-crystalline Calcite Using Rotary Microwave Kiln," J. Ind. Eng. Chem., 20(5), 2727-2734(2014). https://doi.org/10.1016/j.jiec.2013.10.061
  4. Hwang, D. J. and Cho, K. H., "Effects of Sodium Dodecyl Benzenesulfonic Acid (SDBS) on the Morphology and the Crystal Phase of $CaCO_3$," Korean J. Chem. Eng., 28(9), 1927-1935(2011). https://doi.org/10.1007/s11814-011-0044-2
  5. Bes, A. M., "Process Simulation of Limestone Calcination in Normal Shaft Kilns," Ottovon- Guericke University Magdeburg, Germany, 2006 (Dr. -Ing. Thesis).
  6. Chatterjee, A., Basak, T. and Ayappa, K. G., "Analysis of Microwave Sintering of Ceramics," J. AIChE, 44(10), 2302-2311(1998). https://doi.org/10.1002/aic.690441019
  7. Kenkre, V. M., Skala, L. and Weiser, M. W., "Theory of Microwave Interactions in Ceramic Materials: The Phenomenon of Thermal Runaway," J. Materials Science, 26, 2483-2489(1991). https://doi.org/10.1007/BF01130199
  8. Clemens, J. and Saltiel, C., "Numerical Modeling of Materials Processing in Microwave Furnaces," International J. Heat and Mass Transfer, 39(8), 1665-1675(1996). https://doi.org/10.1016/0017-9310(95)00255-3
  9. Clemens, J. and Saltiel, C., "Numerical Modeling of Materials Processing in Microwave Furnaces," International J. Heat and Mass Transfer., 39(8), 1665-1675(1996). https://doi.org/10.1016/0017-9310(95)00255-3
  10. Brosnan, K. H. and Messing, G. L., "Microwave Sintering of Alumina at 2.45 GHz," J. Am. Ceram. Soc., 86(8), 1307-1312(2003). https://doi.org/10.1111/j.1151-2916.2003.tb03467.x
  11. Zhao, C. and Vleugels, J., "Hybrid Sintering with a Tubular Susceptor in a Cylindrical Single-mode Microwave Furnace," Acta Mater., 48, 3795-3801(2000). https://doi.org/10.1016/S1359-6454(00)00160-9
  12. Das, S. and Mukhopadhyay, A. K., "Prospects of Microwave Processing: An Overview," Bull. Mater. Sci., 32(1), 1-13(2009). https://doi.org/10.1007/s12034-009-0001-4
  13. Metaxas, A. C., "Microwave Heating," Power Engineering Journal, 5(5), 237-247(1991). https://doi.org/10.1049/pe:19910047
  14. Panda, S. S., Singh, V. and Upadhyaya, A., "Sintering Response of Austenitic (316L) and Ferritic (434L) Stainless Steel Consolidated in Conventional and Microwave Furnaces," Scripta Materialia. 54, 2179-2183(2006). https://doi.org/10.1016/j.scriptamat.2006.02.034
  15. Changhong, D., Xianpeng, Z. and Jinsong, Z., "The Synthesis of Ultrafine SiC Powder by the Microwave Heating Technique," Journal of Materials Science, 32, 2469-2472(1997). https://doi.org/10.1023/A:1018573611420
  16. J. Garcia-Carmona., J. Gomez-Morales, "Morphological Characteristics and Aggregation of Calcite Crystals Obtained by Bubbling $CO_2$ Through a $Ca(OH)(_2)$ Suspension in the Presence of Additives," Powder Technology, 130, 307-315(2003). https://doi.org/10.1016/S0032-5910(02)00209-7
  17. Shin, B. C., "Preparation of Colloidal Calcium Carbonate by Carbonation Process," Ms.-Ing. Thesis, Department of Chemical Engineering Graduate School, Kangwon National University, Korea(2001).
  18. http://www.samyangcorp.com/CO43/Details/28?searchCate=1.
  19. Mochida, Y., Miyazawa, K. and Tazawa, M., "Changes of Dynamic Properties of Some Kaolin Minerals by Heat-treatment," J. Soc. Inor. Mater. Japan(Gypsum & Lime), 36, 20-25(1958).
  20. Kasai, J., "On Calcing Shringkage and Disolution Rate of Single Crystal of Gypsum," J. Soc. Inor. Mater. Japan(Gypsum & Lime), 63, 75-79(1968).
  21. Nishikawa, Y., "A Study Separation of Burning Dolomite in Sucrose Solution," J. Soc. Inor. Mater. Japan(Gypsum & Lime), 92, 7-14(1968).
  22. Nishino, T., "Separation of Ca and Mg from Dolomite by Ion Exchange Resin, and Basic Studies with High Advanced Usage," J. Soc. Inor. Mater. Japan(Gypsum & Lime), 248, 3-9(1994).
  23. Jackson, L. C., Levings, S. P., Maniocha, L. and Mintmirer, C. A., "Magnesium Compounds," In: Kroschwits, J. I. & Howe-Grant, M., eds., Kirk-Othmer Encyclopedia of Chemical Technology, 3rd ed., Vol. 15, New York, John Wily & Sons, Inc., 675-722(1995).
  24. Lacson, J. G., Cometta, S. and Yoneyama, M., "CEH Product Review : Magnesium Oxide and Other Magnesium Chemicals," In: Chemical Economics Handbook. Menlo Park, CA, SRI International, 93-101(2000).
  25. Hwang, D. J., Yu, Y. H., Baek, C. S. and Lee, G. M., "Preparation of High Purity PCC from Medium- and Low-grade Limestones Using the Strongly Acidic Cation Exchange Resin," J. Ind. Eng. Chem, 30, 309-321(2015). https://doi.org/10.1016/j.jiec.2015.05.038

피인용 문헌

  1. 염 첨가 반응(MgCl2·6H2O)을 이용하여 백운석으로부터 Ca 화합물과 Mg 화합물 합성에 관한 연구 vol.59, pp.3, 2021, https://doi.org/10.9713/kcer.2021.59.3.399