Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings

  • Shariati, Mahdi (Division of Computational Mathematics and Engineering, Institute for Computational Science, Ton Duc Thang University) ;
  • Faegh, Shervin Safaei (Department of Civil Engineering, K.N. Toosi University of Technology) ;
  • Mehrabi, Peyman (Department of Civil Engineering, K.N. Toosi University of Technology) ;
  • Bahavarnia, Seyedmasoud (Department of Civil Engineering, Qeshm International Branch, Islamic Azad University) ;
  • Zandi, Yousef (Department of Civil Engineering, Tabriz Branch, Islamic Azad University) ;
  • Masoom, Davood Rezaee (Department of Civil Engineering, Islamic Azad University, Central Tehran Branch) ;
  • Toghroli, Ali (Institute of Research and Development, Duy Tan University) ;
  • Trung, Nguyen-Thoi (Division of Computational Mathematics and Engineering, Institute for Computational Science, Ton Duc Thang University) ;
  • Salih, Musab NA (School of Civil Engineering, Faculty of Engineering, Universiti Teknologi Malaysia)
  • Received : 2019.06.30
  • Accepted : 2019.11.06
  • Published : 2019.11.25
⟨ Previous Next ⟩

Abstract

Corrugated steel plate shear wall (CSPSW) as an innovative lateral load resisting system provides various advantages in comparison with the flat steel plate shear wall, including remarkable in-plane and out-of-plane stiffnesses and stability, greater elastic shear buckling stress, increasing the amount of cumulative dissipated energy and maintaining efficiency even in large story drifts. Employment of low yield point (LYP) steel web plate in steel shear walls can dramatically improve their structural performance and prevent early stage instability of the panels. This paper presents a comprehensive structural performance assessment of corrugated low yield point steel plate shear walls having circular openings located in different positions. Accordingly, following experimental verification of CSPSW finite element models, several trapezoidally horizontal CSPSW (H-CSPSW) models having LYP steel web plates as well as circular openings (for ducts) perforated in various locations have been developed to explore their hysteresis behavior, cumulative dissipated energy, lateral stiffness, and ultimate strength under cyclic loading. Obtained results reveal that the rehabilitation of damaged steel shear walls using corrugated LYP steel web plate can enhance their structural performance. Furthermore, choosing a suitable location for the circular opening regarding the design purpose paves the way for the achievement of the shear wall's optimal performance.

Keywords

References

  1. Abedini, M., Khlaghi, E.A., Mehrmashhadi, J., Mussa, M.H., Ansari, M. and Momeni, T. (2017), "Evaluation of concrete structures reinforced with fiber reinforced polymers bars: a review", J. Asian Sci. Res., 7(5), 165. https://doi.org/10.18488/journal.2.2017.75.165.175
  2. Abedini, M., Khlaghi, E.A., Mehrmashhadi, J., Mussa, M.H., Ansari, M. and Momeni, T. (2019), "Large Deflection Behavior Effect in Reinforced Concrete Columns Exposed to Extreme Dynamic Loads", engrXiv, 32. https://doi.org/10.31224/osf.io/6n5fs
  3. Al Kajbaf, A., Fanaie, N. and Najarkolaie, K.F. (2018), "Numerical simulation of failure in steel posttensioned connections under cyclic loading", Eng. Fail. Anal., 91, 35-57. https://doi.org/10.1016/j.engfailanal.2018.04.024
  4. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010), "Investigation of seismic behaviour of composite structures with concrete filled square steel tubular (CFSST) column by push-over and time-history analyses", Proceedings of the 4th International Conference on Steel & Composite Structures.
  5. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2011), "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying", Adv. Mater. Res., 168, 2329-2333. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2329
  6. Arabnejad Khanouki, M.M., Ramli Sulong, N.H., Shariati, M. and Tahir, M.M. (2016), "Investigation of through beam connection to concrete filled circular steel tube (CFCST) column", J. Constr. Steel Res., 121, 144-162. https://doi.org/10.1016/j.jcsr.2016.01.002
  7. Arabzade, A., Moharami, H. and Ayazi, A. (2011), "Local elastic buckling coefficients of steel plates in composite steel plate shear walls", Scientia Iranica, 18(1), 9-15. https://doi.org/10.1016/j.scient.2011.03.002
  8. Armaghani, D.J., Hasanipanah, M., Amnieh, H.B., Bui, D.T., Mehrabi, P. and Khorami, M. (2019), "Development of a novel hybrid intelligent model for solving engineering problems using GS-GMDH algorithm", Eng. Comput., 1-13. https://doi.org/10.1007/s00366-019-00769-2
  9. Bahadori, A. and Ghassemieh, M. (2016), "Seismic evaluation of I-shaped beam to box-column connections with top and seat plates by the component method", 129-138.
  10. Bahrebar, M., Kabir, M.Z., Zirakian, T., Hajsadeghi, M. and Lim, J.B. (2016), "Structural performance assessment of trapezoidally-corrugated and centrally-perforated steel plate shear walls", J. Constr. Steel Res., 122, 584-594. https://doi.org/10.1016/j.jcsr.2016.03.030
  11. Bazzaz, M. (2018), "Experimental and analytical procedures to characterize mechanical properties of asphalt concrete materials for airfield pavement applications", Doctoral Dissertation; University of Kansas.
  12. Bazzaz, M., Darabi, M.K., Little, D.N. and Garg, N. (2018), "A straightforward procedure to characterize nonlinear viscoelastic response of asphalt concrete at high temperatures", Transport. Res. Rec., 2672(28), 481-492. https://doi.org/10.1177/0361198118782033
  13. Chen, S.-J. and Jhang, C. (2006), "Cyclic behavior of low yield point steel shear walls", Thin-Wall. Struct., 44(7), 730-738. https://doi.org/10.1016/j.tws.2006.08.002
  14. Chen, S.-J. and Jhang, C. (2011), "Experimental study of lowyield-point steel plate shear wall under in-plane load", J. Constr. Steel Res., 67(6), 977-985. https://doi.org/10.1016/j.jcsr.2011.01.011
  15. Daie, M., Jalali, A., Suhatril, M., Shariati, M., Arabnejad Khanouki, M.M., Shariati, A. and Kazemi-Arbat, P. (2011), "A new finite element investigation on pre-bent steel strips as damper for vibration control", Int. J. Phys. Sci., 6(36), 8044-8050. https://doi.org/10.5897/IJPS11.1585
  16. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., Int. J., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141
  17. Emami, F. and Mofid, M. (2014), "On the hysteretic behavior of trapezoidally corrugated steel shear walls", Struct. Des. Tall Special Build., 23(2), 94-104. https://doi.org/10.1002/tal.1025
  18. Emami, F. and Mofid, M. (2017), "On the improvement of steel plate shear wall behavior using energy absorbent element", Scientia Iranica. Transaction A, Civil Engineering, 24(1), 11.
  19. Emami, F., Mofid, M. and Vafai, A. (2013), "Experimental study on cyclic behavior of trapezoidally corrugated steel shear walls", Eng. Struct., 48, 750-762. https://doi.org/10.1016/j.engstruct.2012.11.028
  20. EN1993-1-5 (2006), Eurocode 3-design of steel structures-Part 1. 5: General rules and supplementary rules for plated structures; Brussels, Belgium
  21. Fanaie, N., Aghajani, S. and Shamloo, S. (2012), "Theoretical assessment of wire rope bracing system with soft central cylinder", Proceedings of the 15th World Conference on Earthquake Engineering.
  22. Fanaie, N., Aghajani, S. and Afsar Dizaj, E. (2016), "Strengthening of moment-resisting frame using cable-cylinder bracing", Adv. Struct. Eng., 19(11), 1736-1754. https://doi.org/10.1177/1369433216649382
  23. Farzampour, A., Laman, J.A. and Mofid, M. (2015), "Behavior prediction of corrugated steel plate shear walls with openings", J. Constr. Steel Res., 114, 258-268. https://doi.org/10.1016/j.jcsr.2015.07.018
  24. Ghassemieh, M. and Bahadori, A. (2015), "Seismic evaluation of a steel moment frame with cover plate connection considering flexibility by component method", Proceedings of the 2015 World Congress on Advances in Structural Engineering and Mechanics, Incheon, Korea.
  25. Hamdia, K.M., Lahmer, T., Trung, N.-T. and Rabczuk, T. (2015), "Predicting the fracture toughness of PNCs: A stochastic approach based on ANN and ANFIS", Computat. Mater. Sci., 102, 304-313. https://doi.org/10.1016/j.commatsci.2015.02.045
  26. Hamidian, M., Shariati, A., Arabnejad Khanouki, M.M., Sinaei, H., Toghroli, A. and Nouri, K. (2012), "Application of Schmidt rebound hammer and ultrasonic pulse velocity techniques for structural health monitoring", Sci. Res. Essays, 7(21), 1997-2001. https://doi.org/10.5897/SRE11.1387
  27. He, Q., Chen, Y.Y., Wang, W. and Tian, H. (2018), "Hysteretic Features of Low Yield Point Steel and its Influence on Shear Plate Damper Behavior", Key Eng. Mater., 763, 718-725. https://doi.org/10.4028/www.scientific.net/KEM.763.718
  28. Heydari, A. and Shariati, M. (2018), "Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium", Struct. Eng. Mech., Int. J., 66(6), 737-748. https://doi.org/10.12989/sem.2018.66.6.737
  29. Hosseinpour, E., Baharom, S., Badaruzzaman, W.H.W., Shariati, M. and Jalali, A. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Struct., Int. J., 26(4), 485-499. https://doi.org/10.12989/scs.2018.26.4.485
  30. Ismail, M., Shariati, M., Abdul Awal, A.S.M., Chiong, C.E., Sadeghipour Chahnasir, E., Porbar, A., Heydari, A. and khorami, M. (2018), "Strengthening of bolted shear joints in industrialized ferrocement construction", Steel Compos. Struct., Int. J., 28(6), 681-690. https://doi.org/10.12989/scs.2018.28.6.681
  31. Jalali, A., Daie, M., Nazhadan, S.V.M., Kazemi-Arbat, P. and Shariati, M. (2012), "Seismic performance of structures with prebent strips as a damper", Int. J. Phys. Sci., 7(26), 4061-4072. https://doi.org/10.5897/IJPS11.1324
  32. Katebi, J., Shoaei-parchin, M., Shariati, M., Trung, N.-T. and Khorami, M. (2019), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Eng. Comput., 1-20. https://doi.org/10.1007/s00366-019-00780-7
  33. Kazerani, S., Fanaie, N. and Soroushnia, S. (2014), "Seismic behavior of drilled beam section in moment connections", Num. Methods Civil Eng., 1(2), 21-28.
  34. Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A. and Tahir, M.M. (2017a), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)".
  35. Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M.M. (2017b), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis".
  36. Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N.H. (2015), "Behavior of tilted angle shear connectors", PLoS One, 10(12), e0144288. https://doi.org/10.1371/journal.pone.0144288
  37. Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N.H. (2016), "Behavior of Tilted Angle Shear Connectors", 10, e0144288. https://doi.org/10.1371/journal.pone.0144288
  38. Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., Int. J. 23(1), 67-85. https://doi.org/10.12989/scs.2017.23.1.067
  39. Li, D., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P., Mohamad, E.T. and Khorami, M. (2019), "Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete", Smart Struct. Syst., Int. J., 23(2), 207-214. https://doi.org/10.12989/sss.2019.23.2.207
  40. Luo, Z., Sinaei, H., Ibrahim, Z., Shariati, M., Jumaat, Z., Wakil, K., Pham, B.T., Mohamad, E.T. and Khorami, M. (2019), "Computational and experimental analysis of beam to column joints reinforced with CFRP plates", Steel Compos. Struct., Int. J., 30(3), 271-280. https://doi.org/10.12989/scs.2019.30.3.271
  41. Mansouri, I., Safa, M., Ibrahim, Z., Kisi, O., Tahir, M.M., Baharom, S.B. and Azimi, M. (2016), "Strength prediction of rotary brace damper using MLR and MARS", Struct. Eng. Mech., Int. J., 60(3), 471-488. https://doi.org/10.12989/sem.2016.60.3.471
  42. Mansouri, I., Shariati, M., Safa, M., Ibrahim, Z., Tahir, M.M. and Petkovic, D. (2019), "Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique", J. Intel. Manuf., 30(3), 1247-1257. https://doi.org/10.1007/s10845-017-1306-6
  43. Milovancevic, M., Marinovic, J.S., Nikolic, J., Kitic, A., Shariati, M., Trung, N.-T., Wakil, K. and Khorami, M. (2019), "UML diagrams for dynamical monitoring of rail vehicles", Physica A: Stat. Mech. Appl., 121169. https://doi.org/10.1016/j.physa.2019.121169
  44. Moghaddam, H., Fanaie, N. and Hamzehloo, H. (2009), "Uniform hazard response spectra and ground motions for Tabriz", J. Scientia Iranica, 16(3), 238-248.
  45. Mohammadhassani, M., Akib, S., Shariati, M., Suhatril, M. and Arabnejad Khanouki, M.M. (2014a), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Fail. Anal., 41, 73-80. https://doi.org/10.1016/j.engfailanal.2013.08.014
  46. Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2014b), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., Int. J., 48(6), 833-848. https://doi.org/10.12989/sem.2013.48.6.833
  47. Mohammadhassani, M., Saleh, A., Suhatril, M. and Safa, M. (2015), "Fuzzy modelling approach for shear strength prediction of RC deep beams", Smart Struct. Syst., Int. J., 16(3), 497-519. https://doi.org/10.12989/sss.2015.16.3.497
  48. Najarkolaie, K.F., Mohammadi, M. and Fanaie, N. (2017), "Realistic behavior of infilled steel frames in seismic events: experimental and analytical study", Bull. Earthq. Eng., 15(12), 5365-5392. https://doi.org/10.1007/s10518-017-0173-z
  49. Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., Int. J. 27(5), 537-543. https://doi.org/10.12989/scs.2018.27.5.537
  50. Nosrati, A., Zandi, Y., Shariati, M., Khademi, K., Darvishnezhad Aliabad, M., Marto, A., Mu'azu, M., Ghanbari, E., Mandizadeh, M.B. and Shariati, A. (2018), "Portland cement structure and its major oxides and fineness", Smart Struct. Syst., Int. J., 22(4), 425-432. https://doi.org/10.12989/sss.2018.22.4.425
  51. Sabouri-Ghomi, S., Ventura, C.E. and Kharrazi, M.H. (2005), "Shear analysis and design of ductile steel plate walls", J. Struct. Eng., 131(6), 878-889. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:6(878)
  52. Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., Int. J., 22(4), 413-424. https://doi.org/10.12989/sss.2018.22.4.413
  53. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steelconcrete composite beam's shear strength", Steel Compos. Struct., Int. J., 21(3), 679-688. https://doi.org/10.12989/scs.2016.21.3.679
  54. Sajedi, F. and Shariati, M. (2019), "Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping", Steel Compos. Struct., Int. J., 30(5), 417-432. https://doi.org/10.12989/scs.2019.30.5.417
  55. Sari, P.A., Suhatril, M., Osman, N., Muazu, M., Dehghani, H., Sedghi, Y., Safa, M., Hasanipanah, M., Wakil, K. and Khorami, M. (2018), "An intelligent based-model role to simulate the factor of safe slope by support vector regression", Eng. Comput., 35(4), 1521-1531. https://doi.org/10.1007/s00366-018-0677-4
  56. Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Moghimi Azar, V., Toghroli, A., Safa, M., Tonnizam Mohamad, E., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., Int. J. 22(3), 335-340. https://doi.org/10.12989/sss.2018.22.3.335
  57. Shah, S., Ramli Sulong, N.H., Shariati, M. and Jumaat, M.Z. (2015), "Steel rack connections: identification of most influential factors and a comparison of stiffness design methods", PloS One, 10(10), e0139422. https://doi.org/10.1371/journal.pone.0139422
  58. Shah, S., Ramli Sulong, N.H., Shariati, M., Khan, R. and Jumaat, M. (2016), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin-Wall. Struct., 106, 471-483. https://doi.org/10.1016/j.tws.2016.05.021
  59. Shahabi, S., Ramli Sulong, N.H., Shariati, M., Mohammadhassani, M. and Shah, S. (2016a), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel Compos. Struct., Int. J., 20(3), 651-669. https://doi.org/10.12989/scs.2016.20.3.651
  60. Shahabi, S., Ramli Sulong, N.H., Shariati, M. and Shah, S. (2016b), "Performance of shear connectors at elevated temperatures-A review", Steel Compos. Struct., Int. J., 20(1), 185-203. https://doi.org/10.12989/scs.2016.20.1.185
  61. Shariat, M., Shariati, M., Madadi, A. and Wakil, K. (2018), "Computational Lagrangian Multiplier Method by using for optimization and sensitivity analysis of rectangular reinforced concrete beams", Steel Compos. Struct., Int. J., 29(2), 243-256. https://doi.org/10.12989/scs.2018.29.2.243
  62. Shariati, M. (2013), Behaviour of C-shaped Shear Connectors in Stell Concrete Composite Beams, Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, University of Malaya, Malaysia.
  63. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel and Composite Structures, Sydney, Australia, July,.
  64. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Shariati, A. (2011a), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM'11+).
  65. Shariati, M., Ramli Sulong, N.H., Sinaei, H., Khanouki, A., Mehdi, M. and Shafigh, P. (2011b), "Behavior of channel shear connectors in normal and light weight aggregate concrete (experimental and analytical study)", Adv. Mater. Res., 168, 2303-2307. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2303
  66. Shariati, M., Sulong, N.R., KH, M.A. and Mahoutian, M. (2011c), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Sci. Res. Essays, 6(4), 977-983. https://doi.org/10.5897/SRE10.1120
  67. Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Shariati, M. (2012a), "Investigation of channel shear connectors for composite concrete and steel T-beam", Int. J. Phys. Sci., 7(11), 1828-1831. https://doi.org/10.5897/IJPS11.1604
  68. Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Shariati, M. (2012b), "Various types of shear connectors in composite structures: A review", Int. J. Phys. Sci., 7(22), 2876-2890. https://doi.org/10.13140/RG.2.1.1903.0563
  69. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012c), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Des., 41, 67-73. https://doi.org/10.1016/j.matdes.2012.04.039
  70. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012d). "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Proceedings of the 5th International Conference on Engineering Failure Analysis, The Hague, The Netherlands, July.
  71. Shariati, M., Sulong, N.R. and Khanouki, M.A. (2012e), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. https://doi.org/10.1016/j.matdes.2011.08.008
  72. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Constr. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050
  73. Shariati, A., Shariati, M., Ramli Sulong, N.H., Suhatril, M., Arabnejad Khanouki, M.M. and Mahoutian, M. (2014a), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Constr. Build. Mater., 52, 276-283. https://doi.org/10.1016/j.conbuildmat.2013.11.036
  74. Shariati, M., Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Arabnejad Khanouki, M.M. (2014b), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail. Anal., 41, 124-134. https://doi.org/10.1016/j.engfailanal.2014.02.017
  75. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Arabnejad Khanouki, M.M. (2015), "Behavior of V-shaped angle shear connectors: experimental and parametric study", Mater. Struct., 49(9), 3909-3926. https://doi.org/10.1617/s11527-015-0762-8
  76. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Kueh, A.B.H. (2016), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392. https://doi.org/10.1016/j.conbuildmat.2016.05.102
  77. Shariati, M., Toghroli, A., Jalali, A. and Ibrahim, Z. (2017), "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering-CSM 2017.
  78. Shariati, M., Tahir, M.M., Wee, T.C., Shah, S., Jalali, A., Abdullahi, M.a.M. and Khorami, M. (2018), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Fail. Anal., 85, 149-166. https://doi.org/10.1016/j.engfailanal.2017.08.014
  79. Shariati, M., Heiati, A., Zandi, Y., Laka, H., Toghroli, A., Kianmehr, P., Safa, M., Salih, M.N. and Poi-Ngian, S. (2019a), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst., Int. J., 24(4), 553-566. https://doi.org/10.12989/sss.2019.24.4.553
  80. Shariati, M., Mafipour, M.S., Mehrabi, P., Zandi, Y., Dehghani, D., Bahadori, A., Shariati, A., Trung, N.T., Salih, M.N. and Poi-Ngian, S. (2019b), "Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures", Steel Compos. Struct., Int. J., 33(3), 319-332. https://doi.org/10.12989/scs.2019.33.3.319
  81. Shariati, M., Rafiei, S., Mehrabi, P., Zandi, Y., Fooladvand, R., Gharehaghaj, B., Shariati, A., Trung, N.T., Salih, M.N. and Poi-Ngian, S. (2019c), "Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete", Adv. Concrete Constr., Int. J., 8(3), 225-237. https://doi.org/10.12989/acc.2019.8.3.225
  82. Shariati, M., Trung, N.-T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019d), "Estimation of moment and rotation of steel rack connections using extreme learning machine", Steel Compos. Struct., Int. J., 31(5), 427-435. https://doi.org/10.12989/scs.2019.31.5.427
  83. Sinaei, H., Jumaat, M.Z. and Shariati, M. (2011), "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579. https://doi.org/10.5897/IJPS11.1225
  84. Sinaei, H., Shariati, M., Abna, A.H., Aghaei, M. and Shariati, A. (2012), "Evaluation of reinforced concrete beam behaviour using finite element analysis by ABAQUS", Sci. Res. Essays, 7(21), 2002-2009. https://doi.org/10.5897/SRE11.139
  85. Suhatril, M., Osman, N., Sari, P.A., Shariati, M. and Marto, A. (2019), "Significance of surface eco-protection techniques for cohesive soils slope in Selangor, Malaysia", Geotech. Geol. Eng., 37(3), 2007-2014. https://doi.org/10.1007/s10706-018-0740-3
  86. Suzuki, T. (1998), "Seismic control devices using low-yield-point steel", Nippon Steel Technical Report; 77(7), 65-72.
  87. Tahmasbi, F., Maleki, S., Shariati, M., Ramli Sulong, N.H. and Tahir, M.M. (2016), "Shear capacity of C-shaped and L-shaped angle shear connectors", PLoS One, 11(8), e0156989. https://doi.org/10.1371/journal.pone.0156989
  88. Tai, V.-V., Trung, N.-T., Trung, V.-D., Vinh, H.-H. and Thao, N.-T. (2017), "Modified genetic algorithm-based clustering for probability density functions", J. Statist. Computat. Simul., 87(10), 1964-1979. https://doi.org/10.1080/00949655.2017.1300663
  89. Thang, L.-D., Vinh, H.-H., Trung, N.-T. and Hung, N.-Q. (2016), "A new design approach based on differential evolution algorithm for geometric optimization of magnetorheological brakes", Smart Mater. Struct., 25(12). https://doi.org/10.1088/0964-1726/25/12/125020
  90. Thorburn, L.J., Kulak, G.L. and Montgomery, C.J. (1983), "Analysis of steel plate shear walls".
  91. Toghroli, A. (2015), "Applications of the ANFIS and LR models in the prediction of shear connection in composite beams", Doctoral Dissertation; University of Malaya, Malaysia.
  92. Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., Int. J., 17(5), 623-639. https://doi.org/10.12989/scs.2014.17.5.623
  93. Toghroli, A., Shariati, M., Karim, M.R. and Ibrahim, Z. (2017). "Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2017, Zurich, Switzerland, September.
  94. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2016), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intel. Manuf., 29(8), 1793-1801. https://doi.org/10.1007/s10845-016-1217-y
  95. Toghroli, A., Darvishmoghaddam, E., Zandi, Y., Parvan, M., Safa, M., Abdullahi, M.A.M., Heydari, A., Wakil, K., Gebreel, S.A. and Khorami, M. (2018a), "Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method", Comput. Concrete., Int. J., 21(5), 525-530. https://doi.org/10.12989/cac.2018.21.5.525
  96. Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Mohamad, E.T. and Khorami, M. (2018b), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., Int. J., 22(4), 433-440. https://doi.org/10.12989/sss.2018.22.4.433
  97. Trung, N.-T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019a), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech., Int. J., 70(5), 639-647. https://doi.org/10.12989/sem.2019.70.5.639
  98. Trung, N.T., Alemi, N., Haido, J.H., Shariati, M., Baradaran, S. and Yousif, S.T. (2019b), "Reduction of cement consumption by producing smart green concretes with natural zeolites", Smart Struct. Syst., Int. J., 24(3), 415-425. https://doi.org/10.12989/sss.2019.24.3.415
  99. Version, A. (2014), 6.14-1. Dassault Systemes Simulia Corp., Providence, RI, USA.
  100. Wei, X., Shariati, M., Zandi, Y., Pei, S., Jin, Z., Gharachurlu, S., Abdullahi, M.M., Tahir, M.M. and Khorami, M. (2018), "Distribution of shear force in perforated shear connectors", Steel Compos. Struct., Int. J., 27(3), 389-399. https://doi.org/10.12989/scs.2018.27.3.389
  101. Xie, Q., Sinaei, H., Shariati, M., Khorami, M., Mohamad, E.T. and Bui, D.T. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel Compos. Struct., Int. J., 30(5), 433-441. https://doi.org/10.12989/scs.2019.30.5.433
  102. Xu, L.-Y., Nie, X. and Fan, J.-S. (2016), "Cyclic behaviour of lowyield-point steel shear panel dampers", Eng. Struct., 126, 391-404. https://doi.org/10.1016/j.engstruct.2016.08.002
  103. Xu, C., Zhang, X., Haido, J.H., Mehrabi, P., Shariati, A., Mohamad, E.T., Nguyen, H. and Wakil, K. (2019), "Using genetic algorithms method for the paramount design of reinforced concrete structures", Struct. Eng. Mech., Int. J., 71(5), 503-513. https://doi.org/10.12989/sem.2019.71.5.503
  104. Zandi, Y., Shariati, M., Marto, A., Wei, X., Karaca, Z., Dao, D., Toghroli, A., Hashemi, M.H., Sedghi, Y. and Wakil, K. (2018), "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake", Steel Compos. Struct., Int. J., 28(4), 439-447. https://doi.org/10.12989/scs.2018.28.4.439
  105. Zhang, W., Mahdavian, M., Li, Y. and Yu, C. (2016), "Experiments and simulations of cold-formed steel wall assemblies using corrugated steel sheathing subjected to shear and gravity loads", J. Struct. Eng., 143(3), 04016193. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001681
  106. Zhao, Q., Sun, J., Li, Y. and Li, Z. (2017), "Cyclic analyses of corrugated steel plate shear walls", Struct. Des. Tall Special Build. https://doi.org/10.1002/tal.1351
  107. Ziaei-Nia, A., Shariati, M. and Salehabadi, E. (2018), "Dynamic mix design optimization of high-performance concrete", Steel Compos. Struct., Int. J., 29(1), 67-75. https://doi.org/10.12989/scs.2018.29.1.067
  108. Zirakian, T. and Zhang, J. (2015), "Structural performance of unstiffened low yield point steel plate shear walls", J. Constr. Steel Res., 112, 40-53. https://doi.org/10.1016/j.jcsr.2015.04.023

Cited by

  1. Elevated temperature resistance of concrete columns with axial loading vol.9, pp.4, 2019, https://doi.org/10.12989/acc.2020.9.4.355
  2. Elevated temperature resistance of concrete columns with axial loading vol.9, pp.4, 2019, https://doi.org/10.12989/acc.2020.9.4.355
  3. Computational analysis of three dimensional steel frame structures through different stiffening members vol.35, pp.2, 2019, https://doi.org/10.12989/scs.2020.35.2.187
  4. Experimentally and Numerically Investigating the Performances of Aramid Fiber-Reinforced Steel Beams Under Impact Loadings vol.45, pp.10, 2019, https://doi.org/10.1007/s13369-020-04608-1
  5. Influence of porosity and cement grade on concrete mechanical properties vol.10, pp.5, 2019, https://doi.org/10.12989/acc.2020.10.5.393
  6. Behavior of L-shaped double-skin composite walls under compression and biaxial bending vol.37, pp.4, 2020, https://doi.org/10.12989/scs.2020.37.4.405
  7. Prediction of total sediment load: A case study of Wadi Arbaat in eastern Sudan vol.26, pp.6, 2019, https://doi.org/10.12989/sss.2020.26.6.781
  8. Seismic Behavior of Nonductile RC Frame Slotted with Corrugated Steel Plate Shear Walls vol.2021, 2019, https://doi.org/10.1155/2021/6653592
  9. Numerical calculation and test of the composite materials under dynamic loading vol.38, pp.1, 2019, https://doi.org/10.12989/scs.2021.38.1.079
  10. Investigation of performance of steel plate shear walls with partial plate-column connection (SPSW-PC) vol.39, pp.1, 2019, https://doi.org/10.12989/scs.2021.39.1.109
  11. Optimization algorithms for composite beam as smart active control of structures using genetic algorithms vol.27, pp.6, 2019, https://doi.org/10.12989/sss.2021.27.6.1041
  12. Computer simulation for stability performance of sandwich annular system via adaptive tuned deep learning neural network optimization vol.11, pp.1, 2021, https://doi.org/10.12989/anr.2021.11.1.083
  13. Application of multi-hybrid metaheuristic algorithm on prediction of split-tensile strength of shear connectors vol.28, pp.2, 2019, https://doi.org/10.12989/sss.2021.28.2.167
  14. Analytical model for the basement wall horizontally supported by flexible floor diaphragms vol.79, pp.5, 2019, https://doi.org/10.12989/sem.2021.79.5.601