Journal of Power Electronics

  • 제19권6호
  • /
  • Pages.1486-1495
  • /
  • 2019
  • /
  • 1598-2092(pISSN)
  • /
  • 2093-4718(eISSN)
전력전자학회 (The Korean Institute of Power Electronics)
권호 표지
DOI QR코드

DOI QR Code

Hybrid Double Direction Blocking Sub-Module for MMC-HVDC Design and Control

  • Zhang, Jianpo (State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University) ;
  • Cui, Diqiong (State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University) ;
  • Tian, Xincheng (State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University) ;
  • Zhao, Chengyong (State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University)
  • 투고 : 2018.06.17
  • 심사 : 2019.08.26
  • 발행 : 2019.11.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Dealing with the DC link fault poses a technical problem for an HVDC based on a modular multilevel converter. The fault suppressing mechanisms of several sub-module topologies with DC fault current blocking capacity are examined in this paper. An improved half-bridge sub-module topology with double direction control switch is also designed to address the additional power consumption problem, and a sub-module topology called hybrid double direction blocking sub module (HDDBSM) is proposed. The DC fault suppression characteristics and sub-module capacitor voltage balance problem is also analyzed, and a self-startup method is designed according to the number of capacitors. The simulation model in PSCAD/EMTDC is built to verify the self-startup process and the DC link fault suppression features.

키워드

참고문헌

  1. R. Marquardt, "Modular multilevel converter topologies with dc-short circuit current limitation," in Proc. of IEEE 8th Int. Power Electron. ECCE Asia Conf, pp1425-1431, 2011.
  2. J. Qin, M. Saeedifard, A. Rockhill, and R. Zhou, “Hybrid design of modular multilevel converters for HVDC systems based on various sub module circuits,” IEEE Trans. Power Del., Vol. 30, No. 1, pp. 385-394, Feb. 2015. https://doi.org/10.1109/TPWRD.2014.2351794
  3. J. Zhang and C. Zhao, “The research of SM topology with DC fault tolerance in MMC-HVDC,” IEEE Trans. Power Del., Vol. 30, No. 3, pp. 1561-1568, Jun. 2015. https://doi.org/10.1109/TPWRD.2015.2399412
  4. R. Zeng, L. Xu, L. Yao, and B. W. Williams, “Design and operation of a hybrid modular multilevel converter,” IEEE Trans. Power Electron., Vol. 30, No. 3, pp. 1137-1146, Mar. 2015. https://doi.org/10.1109/TPEL.2014.2320822
  5. J.-J. Jung, S. Cui, J.-H. Lee, and S.-K. Sul, "A new topology of multilevel VSC converter for a hybrid HVDC transmission system," IEEE Trans. Power Electron., Vol. 32, No. 6, pp.4199-4211, Jun. 2017. https://doi.org/10.1109/TPEL.2016.2598368
  6. W. Lin, D. Jovcic, S. Nguefeu, and H. Saad, “Full-bridge MMC converter optimal design to HVDC operational requirements,” IEEE Trans. Power Del., Vol. 31, No. 3, pp. 1342-1350, Jun. 2016. https://doi.org/10.1109/TPWRD.2015.2475130
  7. T. H. Nguyen and D. C. Lee, “Protection of the MMCs of HVDC transmission systems against DC short-circuit faults,” J. Power Electron., Vol. 17, No. 1, pp. 232-241, Jan. 2017. https://doi.org/10.6113/JPE.2017.17.1.232
  8. X. Yu, Y. Wei, Q. Jiang, X. Xie, Y. Liu, and K. Wang, “A novel hybrid-arm bipolar MMC topology with DC fault ride through capability,” IEEE Trans. Power Del., Vol. 32, No. 3, pp. 1404-1413, Jun. 2017. https://doi.org/10.1109/TPWRD.2016.2593745
  9. R. Li, G. P. Adam, D. Holliday, J. E. Fletcher, and B. W. Williams, “Hybrid cascaded modular multilevel converter with DC fault ride-through capability for the HVDC transmission system,” IEEE Trans. Power Del., Vol. 30, No. 4, pp. 1853-1862, Aug. 2015. https://doi.org/10.1109/TPWRD.2015.2389758
  10. R. Li, J. E. Fletcher, L. Xu, D. Holliday, and B. W. Williams, “A hybrid modular multilevel converter with novel three level cells for DC fault blocking capability,” IEEE Trans. Power Del., Vol. 30, No. 4, pp. 2017-2026, Aug. 2015. https://doi.org/10.1109/TPWRD.2015.2423258
  11. A. Elserougi, A. M. Massoud, and S. Ahmed, "A switched-capacitor sub module for modular multilevel HVDC converters with DC-fault blocking capability and a reduced number of sensors," IEEE Trans. Power Del., Vol. 31, No. 1, pp. 313-322, Feb. 2016. https://doi.org/10.1109/TPWRD.2015.2477684
  12. A. Nami, L. Wang, and F. Dijkhuizen. "Five level cross connected cell for cascaded converters," European Power Electronics and Applications Conference (EPE), 2013.
  13. A. Nami, J. Liang, F. Dijkhuizen, and G. D. Demetriades, “Modular Multilevel Converters for HVDC applications: Review on converter cells and functionalities,” IEEE Trans. Power Electron., Vol. 30, No. 1, pp. 18-36, Jan. 2015. https://doi.org/10.1109/TPEL.2014.2327641
  14. X. Li, Q. Song, W. Liu, H. Rao, S. Xu, L. Li, “Protection of nonpermanent faults on DC overhead lines in MMC-Based HVDC system,” IEEE Trans. Power Del., Vol. 28, No. 1, pp. 483-490, Jan. 2013. https://doi.org/10.1109/TPWRD.2012.2226249
  15. Petar J. Grbovic, F. Gruson, N. Idir, and P. Le Moigne, “Turn-on performance of reverse blocking IGBT (RB IGBT) and optimization using advanced gate driver,” IEEE Trans. Power Electron., Vol. 25, No. 4, pp. 970-981, Apr. 2010. https://doi.org/10.1109/TPEL.2009.2031805
  16. C. Klumpner, P. Nielsen, I. Boldea, and Frede Blaabjerg, “New solutionsfor a low-cost power electronic building block for matrix converters,” IEEE Trans. Ind. Electron., Vol. 49, No. 2, pp. 336-344, Apr. 2002. https://doi.org/10.1109/41.993266
  17. J. Itoh, I. Sato, A. Odaka, H. Ohguchi, H. Kodachi, and N. Eguchi, “Anovel approach to practical matrix converter motor drive system with reverse blocking IGBT,” IEEE Trans. Power Electron., Vol. 20, No. 6, pp. 1356-1363, Nov. 2005. https://doi.org/10.1109/TPEL.2005.857548
  18. C. Klumpner and F. Blaabjerg, “Using reverse-blocking IGBTs in power converters for adjustable-speed drives,” IEEE Trans. Ind. Appl., Vol. 42, No. 3, pp. 807-816, May/Jun. 2006. https://doi.org/10.1109/TIA.2006.872956
  19. M. Callavik, A. Blomberg, J. Hafner, and B. Jacobson, "The hybrid HVDC breaker - An innovation breakthrough enabling reliable HVDC grids," ABB Grid Systems, Technical paper, 2012.
  20. J. Xu, P. Zhao, and C. Zhao, "Reliability analysis and redundancy configuration of MMC with hybrid sub-module topologies," IEEE Trans. Power Electron., Vol. 31, No. 4, pp. 2721-2732, Aug. 2016.