References
- Yoo, B. S., Koo, S. W. and Joh, J. S., “A Study on Suppression of Vibration Caused by Quick-stop Operation of Hydraulic Excavator Boom,” Journal of the Korean Society for Precision Engineering, Vol. 27, No. 12, pp. 33-40, 2010.
- Lee, J. I., “The Convergence Design for Stiffness and Structure Advancement of Automotive Body,” Journal of the Korea Convergence Society, Vol. 8, No. 4, pp. 189-197, 2017. https://doi.org/10.15207/JKCS.2017.8.4.189
- Cho, J. U. and Han, M. S., "A Study on Durability of Under Bar at Car through Structural and Fatigue Analysis," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 44-50, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.044
- Lee, Y. S., Ok, J. K., Kim, H. J. and Yoo, W. S., “Analytical Investigation on the Track Separation Mechanism for Tracked Excavator,” Transactions of the Korean Society of Automotive Engineers, Vol. 14, No. 6, pp. 66-72, 2006.
- Kang, H. J., Kim, B. H., Kim, H. J. and Seo, J. H., “Structural Weld Strength Analysis on Door Hinge of Field Artillery Ammunition Support Vehicle,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 3, pp. 58-65, 2016. https://doi.org/10.14775/ksmpe.2016.15.3.058
- Cho, J. U., Min, B. S. and Han, M. S., “Basic Study on Impact Analysis of Automobile,” J ournal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 1, pp. 64-70, 2009.
- Lee, J. I., A Study on the Design of Blimp Type Rotor Craft Blade according to Pitch Angle, Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 5, pp. 606-611, 2018. https://doi.org/10.17958/ksmt.20.5.201810.606
- Wang, Z. H., Byun, S. J. and Kwon, Y. C., "Fatigue and Vibration Analysis of Table according to Applied Loads, Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 5, pp. 568-573, 2018. https://doi.org/10.17958/ksmt.20.5.201810.568
- Wang, Z. H. and Kwon, Y. C., "Structural Analysis of Center Pillar according to Applied Load, Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 4, pp. 401-406, 2018. https://doi.org/10.17958/ksmt.20.4.201808.401
- Lee, B. H., Lee, C. R., Jeong, Y. J. and Kim, B. H., "A Study on the Structural Analysis of Electric Vehicle Rotor Shaft for Light-Weight, Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 2, pp. 154-159, 2018. https://doi.org/10.17958/ksmt.20.2.201804.154
- Lee, J. I., The Suggestion of Finite Element Modeling Method for Structural Design of Automotive Body, Journal of the Korean Society of Mechanical Technology, Vol. 21, No. 2, pp. 311-320, 2019. https://doi.org/10.17958/ksmt.21.2.201904.311
- Moon, S. G., Park, Y. J. and Lee, G. H., “Determination of Equivalent Moment of Inertia of Flywheel for Inertial Endurance Test of Excavator Slewing System,” Journal of the Korean Society for Precision Engineering, Vol. 34, No. 6, pp. 383-390, 2017. https://doi.org/10.7736/KSPE.2017.34.6.383
- Cho, J. U. and Han, M. S., “Structural Safety Analysis of Car Body,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 7, No. 3, pp. 12-16, 2008.
- Cho, J. U. and Han, M. S., “Durability Study on Structural Strength due to the Shape of Excavator Wheel,” Transactions of the Korean Society of Automotive Engineers, Vol. 21, No. 6, pp. 166-174, 2013. https://doi.org/10.7467/KSAE.2013.21.6.166
- Ryu, J. M., Park, K. C. and Kang, T. W., "A Study on the Structural Design for Safety Improvement of the Winch Mount of an Armored Recovery Vehicle," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 1, pp. 58-62, 2017. https://doi.org/10.14775/ksmpe.2016.16.1.058