Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Numerical Analysis of Flow Distribution in Dust Collector of Industrial Plant

산업용 집진기 내부 유동분포에 관한 수치해석

  • Chin, Do-Hun (Catholic University of Pusan, Dept. of Industrial Health)
  • 진도훈 (부산가톨릭대학교 산업보건학과)
  • Received : 2019.06.25
  • Accepted : 2019.07.13
  • Published : 2019.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is to analyze the flow of a system that collects fumes in the plasma cutting machine widely used in industrial sites. A plan for improving the fume collection facility of an industrial plant using a large plasma cutter was investigated through flow analysis. Results show that it is effective to capture and suck fumes from a nearby cutter. If more hoods were installed near the cutter, fumes that were scattered internally could be removed effectively. In addition, if suction inflow was increased, the fumes could be removed more effectively.

Keywords

References

  1. Kim, B. G., Choi, H. W., Yong, H. T., and Lee, M. H., "Horizontal air-jet effect on the natural convection around a range-hood system", Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 17, No. 4, pp. 333-340, 2005.
  2. Lim, K. B., Lee, K. S., and Lee, C. H., "A numerical study on the flow characteristics of kitchen hood system", Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 18, No. 4 pp. 359-369, 2006.
  3. Lim, K. B., Lee, K. S., and Lee, C. H., "A numerical study on the characteristics of flow field, temperature and concentration distribution according to changing the shape of separation plate of kitchen hood system", Transactions of the KSMEB, Vol. 30, No. 2, pp.177-185, 2006.
  4. Lee, S. S., Moon, J. H., Lee, T. G., Lim, Y. C., and Lee, J. H., "Improvement of working environment by the space ventilation system in a large welding factory", SAREK winter conference, pp. 345-350, 2004.
  5. Koo, N. Y., Lee, Y. K., and Young, Y. S., "An experimental study on the air curtain range hood interrupting the diffusion of polluted air", SAREK winter conference, pp. 382-387, 2002.
  6. Witt, P. J., Solnorda. lC, G., Mittoni, L. J., Finn, S., and Pluta, J., "Optimising the design of fume extraction hoods using a combination of engineering and CFD modelling, Applied Mathematical Modelling", Vol. 30, pp. 1167-1179, 2006. https://doi.org/10.1016/j.apm.2006.02.003
  7. Yi, C. S., Jang, S. C., Choi, J. H., "Numerical Analysis on Hood Shape Improvement of Local Ventilation System", Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 21, No. 4, pp.260-265, 2009.
  8. Lee, C. W., "A Numerical Analysis on Flow Characteristic in a Standard Cyclone Dust Separator," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 5, pp. 97-103, 2011.
  9. Jang, S. C., "Flow and Structural Analysis at Welding Fume of Automatic Gantry Robot," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 6, pp. 158-163, 2012.
  10. Jang, S. C., Kim, J. W., Yi, C. S., "Numerical analysis on the inner flow characteristic for small smoke collector", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 5, pp. 67-75, 2013.