DOI QR코드

DOI QR Code

Flow Analysis of Air Cleaner and Resonator by Shape

형상별 에어클리너와 레조네이터의 유동에 관한 연구

  • Han, Moonsik (Department of Mechanical and Automotive Engineering, Keimyung UNIV.) ;
  • Cho, Jaeung (Division of Mechanical and Automotive Engineering, Kongju National UNIV.)
  • 한문식 (계명대학교 기계자동차공학과) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Received : 2019.05.18
  • Accepted : 2019.06.05
  • Published : 2019.09.30

Abstract

In this study, flow analysis results according to different air cleaner and resonator configurations were used to investigate flow and velocity. Among models A, B, and C, model B had the higher speed and pressure. Model B is therefore considered suitable as an air cleaner. This study aims to design optimal shapes of air cleaners and resonators without noise sources.

Keywords

References

  1. Park, J. Y., Baek, S. H. and Kang, J. H., "Design Criteria of Spring Stiffness for Pan Check Valve Using CFD Analysis," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 3, pp. 49-55, 2014. https://doi.org/10.14775/ksmpe.2014.13.3.049
  2. Cho, J. U. and Han, M. S., "Study on Flow and Stress Analysis of Gas Turbine Blade," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 3, pp. 67-72, 2011.
  3. Lee, S. Y. and Kim, S. C., "Flow Analysis for Optimal Design of Small Gear Pump," Journal of Energy Engineering, Vol. 24, No. 1, pp. 88-96, 2015. https://doi.org/10.5855/ENERGY.2015.24.1.088
  4. Yun, J. H., Jeong, I. G., Yi, C. S. and Suh, J. S., "Flow Characteristics due to Cutoff angle of Turbo-Fan for Industries," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 5, pp. 91-96, 2011.
  5. Yi, C. S., "Numerical Analysis of the Kitchen Hood Ventilation System for Marine Environment," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 5, pp. 96-101, 2015. https://doi.org/10.14775/ksmpe.2015.14.5.096
  6. Ku, H. K., Kim, J. W., Won, C. and Song, J. I., "Optimization and Structure Analysis of Brake Disc for Free-fall Winch," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 55-61, 2012.
  7. Kwag, S. H., "Flow Analysis over Moving Circular Cylinder Near the Wall at Moderate Reynolds Number," Journal of the Korean Society of Marine Engineering, Vol. 36, No. 8, pp. 1091-1096, 2012. https://doi.org/10.5916/jkosme.2012.36.8.1091
  8. Wang, Z. H., Chun, C. K. and Kwon, Y. C., "Study on Exhaust Air Heat Transfer Characteristics of Heat Exchange System for White Smoke Reduction," Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 6, pp. 739-744, 2018. https://doi.org/10.17958/ksmt.20.6.201812.739
  9. Choi, Y. S. and Kwon, Y. C., "An Experimental Study of Air-side Heat Transfer and Pressure Drop of Evaporator for Refrigerator Unit," Journal of the Korean Society of Mechanical Technology, Vol. 21, No. 1, pp. 42-47, 2019. https://doi.org/10.17958/ksmt.21.1.201902.42
  10. Hwang, S. W., "A Comparison Study of Performance due to the Oil-cooler Fin Shape for Diesel Engine using Numerical Analysis," Journal of the Korean Society of Mechanical Technology, Vol. 21, No. 1, pp. 1-7, 2019. https://doi.org/10.17958/ksmt.21.1.201902.1
  11. Jang, B. M. and Cho, D. H. ,"A Study on the Flow Characteristics around Vertical Wall with Flap," Journal of the Korean Society of Mechanical Technology, Vol. 21, No. 2, pp. 248-253, 2019. https://doi.org/10.17958/ksmt.21.2.201904.248
  12. Kang, H. J. and Lee, H. S., "A Study on Heating and Cooling Performance Characteristics of Heat Meter for Water Source Heat Pump System," Journal of the Korean Society of Mechanical Technology, Vol. 21, No. 2, pp. 321-326, 2019. https://doi.org/10.17958/ksmt.21.2.201904.321
  13. Kim, J. H., Kim, J. B. and Oh, Y. L., "Performance Prediction of Wind Power Turbine by CFD Analysis," Transactions of the Korean Society of Mechanical Engineers - B, Vol. 37, No. 4, pp. 423-429, 2013. https://doi.org/10.3795/KSME-B.2013.37.4.423
  14. Kim, T. H., Lee, J. H., Ahn, J. G., Jang, S. C., Park, C. H., Yoon, S. N. and Han, S. M., "Flow analysis of Pneumatic Actuator," Proceedings of KSMPE Conf., pp. 8-8, 2016.
  15. Kim, B. H. and Jung, D. S., "Flow Analysis for the Sludge Pneumatic Dehydrator with Cyclone Type," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 4, pp. 1-6, 2009.