한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제18권9호
  • /
  • Pages.7-16
  • /
  • 2019
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

해외규격과 구조해석을 이용한 KGS FS551 개정안 연구

Research for KGS FS551 Amendment Using Abroad Code and Structure Simulation

  • 투고 : 2019.05.29
  • 심사 : 2019.06.11
  • 발행 : 2019.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

According to KGS FS551, the safety of an exposure pipe system should be calculated quantitatively by calculating the stress of exposed piping for thermal expansion. However, many pipe system designs and installation sites are not equipped for this. Therefore, KGS FS551 suggested the use of safe gas by presenting the recommended pipe shape. The shapes of various pipe systems have been derived. However, the recommended shape could not be an absolute evaluation standard. Furthermore, the ongoing debate over standards between a plumbing installer and an inspector is an obstacle to the efficient and safe use of gas. Therefore, the correct pipe system evaluation method is examined in this study, and the safety of the existing exposed pipe system is verified.

키워드

참고문헌

  1. ASME, ASME Boiler and Pressure Vessel Code, ASME SECTION VIII Division 1-3, 2003.
  2. ASME, PROCESS PIPING, ASME B31.3-2002, 2002.
  3. ASME, Gas Transmission and Distribution Piping Systems, ASME B31.8-2016, 2016.
  4. The Korean Welding and Joining Society, Handbook of Welding Joint I, 2017.
  5. Amearican Welding Society, Structural Welding Code, 2003.
  6. International Institute of Welding, RECOMMENDATIONS FOR FATIGUE DESIGN OF WELDED JOINTS AND COMPONENTS, 2003.
  7. Taguchi, G., Phadke, M. S., "Quality Engineering Through Design Optimization", Proceedings of GLOBECOM 84 Meeting, IEEE Communications Society, Atlanta, GA, pp.1106-1113, 1984.
  8. Kim, K. I., Yeom, K. J., Oh, K. H., and Kim, W. S., "Effect of Depth on Pipeline Stress and Displacement in Cold Regions with Thaw Settlement", Journal of the Korean Institute of GAS, Vol. 20, No. 5, pp. 82-88, 2016. https://doi.org/10.7842/kigas.2016.20.5.82
  9. Kang, B. I., Park, W. I, Yim, S. S., Jo, Y. D., "Research for Detailed Technical Standards of Exposure Pipe", Journal of the Korean Institute of GAS, Vol. 22, No. 3, pp. 13-19, 2018. https://doi.org/10.7842/KIGAS.2018.22.3.13
  10. Peng, L. C., Peng, T. L., PIPE STRESS ENGINEERING, ASME PRESS, pp. 151-205, 2003.
  11. Miner, M. A., "Cumulative Damage in Fatigue", Journal of Applied Mechanics, Vol. 12, pp. 159-164, 1945. https://doi.org/10.1115/1.4009458
  12. FEMFAT, FEMFAT MANUAL, 2016.