Earthquakes and Structures

  • 제17권5호
  • /
  • Pages.501-510
  • /
  • 2019
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effectiveness of diagonal shear reinforcement on reinforced concrete short beams

  • Ozturk, Hakan (Department of Civil Engineering, Engineering Faculty, Sakarya University) ;
  • Caglar, Naci (Department of Civil Engineering, Engineering Faculty, Sakarya University) ;
  • Demir, Aydin (Department of Civil Engineering, Engineering Faculty, Sakarya University)
  • 투고 : 2019.08.08
  • 심사 : 2019.10.10
  • 발행 : 2019.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

In the study, an experimental and numerical study is performed to investigate the efficiency of diagonal shear reinforcement (DSR) on reinforced concrete (RC) short beams. For this purpose, 7 RC short beam specimens were tested under a 4-point loading, and a numerical study is conducted by using finite element method. Additionally, the efficiency of addition of DSR to specimens is observed in the experimental study together with the increase in stirrup spacing. Analysis results are compared in terms of load-displacement behavior and failure modes. As a result of the study, a significant improvement both in shear and displacement capacities of the RC short beams are achieved along with addition of DSR in short beams. Moreover, it is deduced from the numerical results that increasing both the diameter and yield strength of DSR makes a significant contribution to the shear capacity and ductility of shear critical RC members.

키워드

참고문헌

  1. ABAQUS 2018 Research Edition. Abaqus Unified FEA. Dassault Systemes SE: 10 rue Marcel Dassault CS 40501 78946 Velizy-Villacoublay Cedex, France.
  2. Al-Nasra, M. and Asha, N. (2013), "Shear reinforcements in the reinforced concrete beams", AJER, 10, 191-199.
  3. Chalioris, C., Favvata, M. and Karayannis, C. (2008), "Reinforced concrete beam-column joints with crossed inclined bars under cyclic deformations", Earthq. Eng. Struct. Dyn., 37, 881-897. https://doi.org/10.1002/eqe.793.
  4. Chang, C., Kim, S.J., Park, D. and Choi, S. (2014), "Experimental investigation of reinforced concrete columns retrofitted with polyester sheet", Earthq. Struct., 6(3), 237-250. http://dx.doi.org/10.12989/eas.2014.6.3.237.
  5. Corte, W. and Boel, V. (2013), "Effectiveness of spirally shaped stirrups in reinforced concrete beams", Eng. Struct., 52, 667-675. https://doi.org/10.1016/j.engstruct.2013.03.032.
  6. Demir, A., Caglar, N., Ozturk, H. and Sumer, Y. (2016), "Nonlinear finite element study on the improvement of shear capacity in reinforced concrete T-Section beams by an alternative diagonal shear reinforcement", Eng. Struct., 120, 158-165. https://doi.org/10.1016/j.engstruct.2016.04.029.
  7. Dirikgil, T. (2014), "Analytical and experimental investigation of new approaches to strengthening and designing of reinforced concrete columns", PhD Dissertation, Erciyes University Graduate School of Natural and Applied Science, Kayseri.
  8. Dirikgil, T. and Altun, F. (2015), "Experimental study on effect of diagonal reinforcement details on hystretic behavior of RC short columns", ICONSETE, Vienna.
  9. Ersoy, U. and Ozcebe, G. (2004), Reinforced Concrete, Evrim, Istanbul, Turkey.
  10. Hibbitt, H., Karlsson, B. and Sorensen, E. (2011), ABAQUS User's Manual, Providence (RI), Dassault Systemes Simulia Corp.
  11. Hu, Y., Jiang, L. and Zheng, H. (2017), "Cyclic tests and numerical study of composite steel plate deep beam", Earthq. Struct., 12(1), 23-34. https://doi.org/10.12989/eas.2017.12.1.023.
  12. Karayannis, C. and Chalioris, C. (2013), "Shear tests of reinforced concrete beams with continuous rectengular spiral reinforcement", Constr. Build. Mater., 46, 86-97. https://doi.org/10.1016/j.conbuildmat.2013.04.023.
  13. Lublinear, J., Oliver, L., Oller, S. and Onate, E. (1989), "A plastic-damage model for concrete", Solid. Struct., 3, 299-326. https://doi.org/10.1016/0020-7683(89)90050-4.
  14. Luo, D., Ning, C. and Li, B. (2019), "Effective torsional stiffness of reinforced concrete structural walls", Earthq. Struct., 16(1), 119-127. https://doi.org/10.12989/eas.2019.16.1.119.
  15. Mohamed, A., Shoukry, M. and Saeed, J. (2014), "Prediction of the behavior of RC deep beams with web openings using the finite element method", Alex. Eng. J., 53, 329-339. https://doi.org/10.1016/j.aej.2014.03.001.
  16. Moretti, M.L. and Tassios, T.P. (2013), "Design in shear of reinforced concrete short columns", Earthq. Struct., 4(3), 265-283. https://doi.org/10.12989/eas.2013.4.3.265.
  17. Nguyen, X.H. and Nguyen, H.C. (2016), "Seismic behavior of non-seismically designed reinforced concrete frame structure", Earthq. Struct., 11(2), 281-295. http://dx.doi.org/10.12989/eas.2016.11.2.281.
  18. Panto, B., Giresini, L., Sassu, M. and Calio I. (2017), "Non-linear modeling of masonry churches through a discrete macro-element approach", Earthq. Struct., 12(2), 223-236. https://doi.org/10.12989/eas.2017.12.2.223.
  19. TEC (2007), Turkish Earthquake Code, Ministry of Environment and Urbanisation, Ankara.
  20. TS-500 (2000), Requirements for Design and Construction of Reinforced Concrete Structures, Turkish Standards Institute, Ankara.
  21. Tubaldi, E., Barbato, M. and Dall'Asta, A. (2010), "Transverse seismic response of continuous steel concrete composite bridges exhibiting dual load path", Earthq. Struct., 1(1), 21-41. https://doi.org/10.12989/eas.2010.1.1.021.
  22. Wang, P., Shi, Q.X., Wang, Q.W. and Tao, Y. (2015), "Experimental behavior and shear bearing capacity calculation of RC columns with a vertical splitting failure", Earthq. Struct., 9(6), 1233-1250. https://doi.org/10.12989/eas.2015.9.6.1233.
  23. Wight, J.K. and MacGregor, J.K. (2012), Reinforced Concrete Mechanics & Design, Pearson Education Inc. New Jersey.
  24. Yang, K., Kim, G. and Yang, H. (2011), "Shear behavior of continuous reinforced concrete T-beams using wire rope as internal shear reinforcement", Constr. Build. Mater., 25, 911-918. https://doi.org/10.1016/j.conbuildmat.2010.06.093.