DOI QR코드

DOI QR Code

Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete

  • Shariati, Mahdi (Institute of Research and Development, Duy Tan University) ;
  • Rafie, Shervin (Department of Construction Engineering and Management, Amirkabir University of Technology) ;
  • Zandi, Yousef (Department of Civil Engineering, Tabriz Branch, Islamic Azad University) ;
  • Fooladvand, Rouhollah (Department of Civil Engineering, Qeshm International Branch, Islamic Azad University) ;
  • Gharehaghaj, Behnam (Department of Civil Engineering, Tabriz Branch, Islamic Azad University) ;
  • Mehrabi, Peyman (Department of Civil Engineering, K.N. Toosi University of Technology) ;
  • Shariat, Ali (Division of Computational Mathematics and Engineering, Institute for Computational Science, Ton Duc Thang University) ;
  • Trung, Nguyen Thoi (Division of Computational Mathematics and Engineering, Institute for Computational Science, Ton Duc Thang University) ;
  • Salih, Musab N.A. (School of Civil Engineering, Faculty of Engineering, Universiti Teknologi Malaysia) ;
  • Poi-Ngian, Shek (Construction Research Center (CRC), Institute for Smart Infrastructure & Innovative Construction (ISIIC), School of Civil Engineering, Universiti Teknologi Malaysia)
  • 투고 : 2019.07.08
  • 심사 : 2019.09.22
  • 발행 : 2019.11.25

초록

Although applying self-consolidating concrete (SCC) in many modern structures is an inevitable fact, the high consumption of cement in its mixing designs has led to increased production costs and adverse environmental effects. In order to find economically viable sources with environmentally friendly features, natural pozzolan pumice and blast furnace slag in 10-50% of replacement binary designs have been investigated for experiments on the properties of fresh concrete, mechanical properties, and durability. As a natural pozzolan, pumice does not require advanced equipment to prepare for consumption and only needs to be powdered. Pumice has been the main focus of this research because of simple preparation. Also to validate the results, in addition to the control specimens of each design, fly ash as a known powder has been evaluated. Moreover, ternary mixes of pumice and silica fume were investigated to enhance the obtained results of binary mixes. It was concluded that pumice and slag powders indicated favorable performance in the high percentage of replacement.

키워드

참고문헌

  1. Abedini, M., Khlaghi, E.A., Mehrmashhadi, J., Mussa, M.H., Ansari, M. and Momeni, T. (2017), "Evaluation of concrete structures reinforced with fiber reinforced polymers bars: A review", J. Asian Scientif. Res., 7(5), 165. https://doi.org/10.18488/journal.2.2017.75.165.175
  2. Abedini, M., Khlaghi, E.A., Mehrmashhadi, J., Mussa, M.H., Ansari, M. and Momeni, T. (2019), "Large deflection behavior effect in reinforced concrete columns exposed to extreme dynamic loads", engrXiv: 32 DOI: 10.31224/osf.io/6n5fs.
  3. Aghakhani, M., Suhatril, M., Mohammadhassani, M., Daie, M. and Toghroli, A. (2015), "A simple modification of homotopy perturbation method for the solution of Blasius equation in semi-infinite domains", Math. Probl. Eng., 2015, Article ID 671527, 7.
  4. Ameri, M., Kalantari, B. and Jahandari, S. (2015), "Laboratory study of determination of optimum amount of water and clay in mortar made with lime and fly ash. International conference on research in science and technology", Kualalumpur, Malaysia.
  5. Antiohos, S., Papadakis, V., Chaniotakis, E. and Tsimas, S. (2007), "Improving the performance of ternary blended cements by mixing different types of fly ashes", Cement Concrete Res., 37(6), 877-885. https://doi.org/10.1016/j.cemconres.2007.02.017
  6. Arabnejad Khanouki, M., Ramli Sulong, N. and Shariati, M. (2010), "Investigation of seismic behaviour of composite structures with concrete filled square steel tubular (CFSST) column by push-over and time-history analyses", Proceedings of the 4th International Conference on Steel & Composite Structures.
  7. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2011), "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying", Adv. Mater. Res., 168, 2329-2333. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2329
  8. Arabnejad Khanouki, M.M., Ramli Sulong, N.H., Shariati, M. and Tahir, M.M. (2016), "Investigation of through beam connection to concrete filled circular steel tube (CFCST) column", J. Constr. Steel Res., 121, 144-162. https://doi.org/10.1016/j.jcsr.2016.01.002
  9. Armaghani, D.J., Hasanipanah, M., Amnieh, H.B., Bui, D.T., Mehrabi, P. and Khorami, M. (2019), "Development of a novel hybrid intelligent model for solving engineering problems using GS-GMDH algorithm", Eng. Comput., 1-13.
  10. Bazzaz, M. (2018), "Experimental and analytical procedures to characterize mechanical properties of asphalt concrete materials for airfield pavement applications", University of Kansas.
  11. Bazzaz, M., Andalib, Z., Kafi, M.A. and Kheyroddin, A. (2015), "Evaluating the performance of OBS-CO in steel frames under monotonic load", Earthq. Struct., 8(3), 697-710.
  12. Beggas, D. and Zeghiche, J. (2013), "The use of slag stone concrete to improve the thermal performance of light steel buildings", Sustain. Citi. Soc., 6, 22-26. https://doi.org/10.1016/j.scs.2012.07.004
  13. Boukendakdji, O., Kadri, E.H. and Kenai, S. (2012), "Effects of granulated blast furnace slag and superplasticizer type on the fresh properties and compressive strength of self-compacting concrete", Cement Concrete Compos., 34(4), 583-590. https://doi.org/10.1016/j.cemconcomp.2011.08.013
  14. Chahnasir, E.S., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., 22(4), 413-424. https://doi.org/10.12989/SSS.2018.22.4.413
  15. Chen, T., Qi, M., Gu, X.L. and Yu, Q.Q. (2015), "Flexural strength of carbon fiber reinforced polymer repaired cracked rectangular hollow section steel beams", Int. J. Polym. Sci., 2015, Article ID 204861, 9.
  16. Cheng-Yi, H. and Feldman, R. (1985), "Hydration reactions in Portland cement-silica fume blends", Cement Concrete Res., 15(4), 585-592. https://doi.org/10.1016/0008-8846(85)90056-0
  17. Cohen, M. (1990), "A look at silica fume and its actions in Portland cement concrete", Ind. Concrete J., 64(9), 429-438.
  18. Daie, M., Jalali, A., Suhatril, M., Shariati, M., Arabnejad Khanouki, M.M., Shariati, A. and Kazemi Arbat, P. (2011), "A new finite element investigation on pre-bent steel strips as damper for vibration control", Int. J. Phys. Sci., 6(36), 8044-8050.
  19. Davis, R.E., Carlson, R.W., Kelly, J.W. and Davis, H.E. (1937), "Properties of cements and concretes containing fly ash", J. Proc., 33(5), 577-612.
  20. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., 30(2), 141-147. https://doi.org/10.12989/SCS.2019.30.2.141
  21. Dehwah, H. (2012), "Mechanical properties of self-compacting concrete incorporating quarry dust powder, silica fume or fly ash", Constr. Build. Mater., 26(1), 547-551. https://doi.org/10.1016/j.conbuildmat.2011.06.056
  22. Fanaie, N., Aghajani, S. and Afsar Dizaj, E. (2016), "Strengthening of moment-resisting frame using cable-cylinder bracing", Adv. Struct. Eng., 19(11), 1736-1754. https://doi.org/10.1177/1369433216649382
  23. Fanaie, N., Aghajani, S. and Shamloo, S. (2012), "Theoretical assessment of wire rope bracing system with soft central cylinder", 15th World Conference on Earthquake Engineering.
  24. Ghassemieh, M. and Bahadori, A. (2015), "Seismic evaluation of a steel moment frame with cover plate connection considering flexibility by component method", Proceedings of the 2015 World Congress on Advances in Structural Engineering and Mechanics, Incheon, Korea.
  25. Hamdia, K.M., Lahmer, T., Nguyen-Thoi, T. and Rabczuk, T. (2015), "Predicting the fracture toughness of PNCs: A stochastic approach based on ANN and ANFIS", Comput. Mater. Sci., 102, 304-313. https://doi.org/10.1016/j.commatsci.2015.02.045
  26. Hamidian, M., Shariati, A., Khanouki, M.M.A., Sinaei, H., Toghroli, A. and Nouri, K. (2012), "Application of Schmidt rebound hammer and ultrasonic pulse velocity techniques for structural health monitoring", Scientif. Res. Essay., 7(21), 1997-2001.
  27. Hamidian, M., Shariati, M., Arabnejad, M. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266.
  28. Heydari, A. and Shariati, M. (2018), "Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium", Struct. Eng. Mech., 66(6), 737-748. https://doi.org/10.12989/SEM.2018.66.6.737
  29. Hossain, K. and Lachemi, M. (2006), "Performance of volcanic ash and pumice based blended cement concrete in mixed sulfate environment", Cement Concrete Res., 36(6), 1123-1133. https://doi.org/10.1016/j.cemconres.2006.03.010
  30. Hossain, K.M.A. (2005), "Volcanic ash and pumice as cement additives: pozzolanic, alkali-silica reaction and autoclave expansion characteristics", Cement Concrete Res., 35(6), 1141-1144. https://doi.org/10.1016/j.cemconres.2004.09.025
  31. Hosseinpour, E., Baharom, S., Badaruzzaman, W.H.W., Shariati, M. and Jalali, A. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Struct., 26(4), 485-499. https://doi.org/10.12989/SCS.2018.26.4.485
  32. Hwang, K., Noguchi, T. and Tomosawa, F. (2004), "Prediction model of compressive strength development of fly-ash concrete", Cement Concrete Res., 34(12), 2269-2276. https://doi.org/10.1016/j.cemconres.2004.04.009
  33. Ismail, M., Shariati, M., Abdul Awal, A., Chiong, C., Chahnasir, E.S., Porbar, A., Heydari, A. and Khorami, M. (2018), "Strengthening of bolted shear joints in industrialized ferrocement construction", Steel Composite Struct., 28(6), 681-690. https://doi.org/10.12989/SCS.2018.28.6.681
  34. Jahandari, S. (2015), "Laboratory study of moisture and capillarity impact on lime concrete resistance due to the increase of ground water level", Faculty of Civil and Surveying Engineering, Department of Geotechnical Engineering, Graduate University of Advanced Technology, Kerman, Iran.
  35. Jahandari, S., Li, J., Saberian, M. and Shahsavarigoughari, M. (2017), "Experimental study of the effects of geogrids on elasticity modulus, brittleness, strength, and stress-strain behavior of lime stabilized kaolinitic clay", GeoResJ, 13, 49-58. https://doi.org/10.1016/j.grj.2017.02.001
  36. Jahandari, S., Saberian, M., Zivari, F., Li, J., Ghasemi, M. and Vali, R. (2019), "Experimental study of the effects of curing time on geotechnical properties of stabilized clay with lime and geogrid", Int. J. Geotech. Eng., 13(2), 172-183. https://doi.org/10.1080/19386362.2017.1329259
  37. Jalali, A., Daie, M., Nazhadan, S.V.M., Kazemi-Arbat, P. and Shariati, M. (2012), "Seismic performance of structures with pre-bent strips as a damper", Int. J. Phys. Sci., 7(26), 4061-4072.
  38. Katebi, J., Shoaei-Parchin, M., Shariati, M., Trung, N.T. and Khorami, M. (2019), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Eng. Comput., 1-20.
  39. Khayat, K., Yahia, A. and Sayed, M. (2008), "Effect of supplementary cementitious materials on rheological properties, bleeding, and strength of structural grout", ACI Mater. J., 105(6), 585.
  40. Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A. and Tahir, M. (2017), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)", Earthq. Struct., 13(6), 531-538. https://doi.org/10.12989/EAS.2017.13.6.531
  41. Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M. (2017), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., 63(2), 259-268. https://doi.org/10.12989/sem.2017.63.2.259
  42. Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N.H. (2015), "Behavior of tilted angle shear connectors", PLoS One, 10(12), e0144288. https://doi.org/10.1371/journal.pone.0144288
  43. Khorramian, K., Maleki, S., Shariati, M. and Sulong, R. N. (2016), "Behavior of Tilted Angle Shear Connectors (vol 10, e0144288, 2015)", PLOS ONE, 11(2).
  44. Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., 23(1), 67-85. https://doi.org/10.12989/scs.2017.23.1.067
  45. Le-Duc, T., Ho-Huu, V., Nguyen-Thoi, T. and Nguyen-Quoc, H. (2016), "A new design approach based on differential evolution algorithm for geometric optimization of magnetorheological brakes", Smart Mater. Struct., 25(12), 125020. https://doi.org/10.1088/0964-1726/25/12/125020
  46. Li, D., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P., Mohamad, E.T. and Khorami, M. (2019), "Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete", Smart Struct. Syst., 23(2), 207-214. https://doi.org/10.12989/SSS.2019.23.2.207
  47. Li, G. and Zhao, X. (2003), "Properties of concrete incorporating fly ash and ground granulated blast-furnace slag", Cement Concrete Compos., 25(3), 293-299. https://doi.org/10.1016/S0958-9465(02)00058-6
  48. Luo, Z., Sinaei, H., Ibrahim, Z., Shariati, M., Jumaat, Z., Wakil, K., Pham, B.T., Mohamad, E.T. and Khorami, M. (2019), "Computational and experimental analysis of beam to column joints reinforced with CFRP plates", Steel Compos. Struct., 30(3), 271-280. https://doi.org/10.12989/SCS.2019.30.3.271
  49. Malhotra, V. (1999), "Making concrete greener with fly ash", Concrete Int., 21(5), 61-66.
  50. Mansouri, I., Safa, M., Ibrahim, Z., Kisi, O., Tahir, M., Baharom, S. and Azimi, M. (2016), "Strength prediction of rotary brace damper using MLR and MARS", Struct. Eng. Mech., 60(3), 471-488. https://doi.org/10.12989/sem.2016.60.3.471
  51. Mansouri, I., Shariati, M., Safa, M., Ibrahim, Z., Tahir, M. and Petkovic, D. (2017), "Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique", J. Intel. Manuf., 1-11.
  52. Manville, V., White, J., Houghton, B. and Wilson, C. (1998), "The saturation behaviour of pumice and some sedimentological implications", Sediment. Geol., 119(1-2), 5-16. https://doi.org/10.1016/S0037-0738(98)00057-8
  53. Mehta, P.K. (1998), "Role of pozzolanic and cementious material in sustainable development of the concrete industry", Spec. Publ., 178, 1-20 9.
  54. Milovancevic, M., Marinovic, J.S., Nikolic, J., Kitic, A., Shariati, M., Trung, N.T., Wakil, K. and Khorami, M. (2019), "UML diagrams for dynamical monitoring of rail vehicles", Physica A: Statist. Mech. Appl., 121169.
  55. Moghaddam, H., Fanaie, N. and Hamzehloo, H. (2009), "Uniform hazard response spectra and ground motions for Tabriz", J. Scientia Iranica, 16(3), 238-248.
  56. Mohammadhassani, M., Akib, S., Shariati, M., Suhatril, M. and Arabnejad Khanouki, M.M. (2014), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Fail. Anal., 41, 73-80. https://doi.org/10.1016/j.engfailanal.2013.08.014
  57. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2013), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech, 46(6), 853-868. https://doi.org/10.12989/sem.2013.46.6.853
  58. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2014), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., 14(5), 785-809. https://doi.org/10.12989/sss.2014.14.5.785
  59. Mohammadhassani, M., Saleh, A.M.D., Suhatril, M. and Safa, M. (2015), "Fuzzy modelling approach for shear strength prediction of RC deep beams", Smart Struct. Syst., 16(3), 497-519. https://doi.org/10.12989/sss.2015.16.3.497
  60. Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2013), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., 48(6), 833-848. https://doi.org/10.12989/sem.2013.48.6.833
  61. Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2014), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., 48(6), 833-848. https://doi.org/10.12989/sem.2013.48.6.833
  62. Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., 27(5), 537-543. https://doi.org/10.12989/SCS.2018.27.5.537
  63. Nosrati, A., Zandi, Y., Shariati, M., Khademi, K., Aliabad, M.D., Marto, A., Mu'azu, M., Ghanbari, E., Mandizadeh, M. and Shariati, A. (2018), "Portland cement structure and its major oxides and fineness", Smart Struct. Syst., 22(4), 425-432. https://doi.org/10.12989/SSS.2018.22.4.425
  64. Nosrati, A., Zandi, Y., Shariati, M., Khademi, K., Darvishnezhad Aliabad, M., Marto, A., ... & Khorami, M. (2018), "Structure of Portland cement and its major oxides and fineness", Smart Struct. Syst., 22(4), 425-432. https://doi.org/10.12989/SSS.2018.22.4.425
  65. Paknahad, M., Shariati, M., Sedghi, Y., Bazzaz, M. and Khorami, M. (2018), "Shear capacity equation for channel shear connectors in steel-concrete composite beams", Steel Compos. Struct., 28(4), 483-494. https://doi.org/10.12989/SCS.2018.28.4.483
  66. Ramachandran, V. and Malhotra, V. M. (1996), Superplasticizers, Concrete Admixtures Handbook, Elsevier.
  67. Saberian, M., Mehrinejad Khotbehsara, M., Jahandari, S., Vali, R. and Li, J. (2018), "Experimental and phenomenological study of the effects of adding shredded tire chips on geotechnical properties of peat", Int. J. Geotech. Eng., 12(4), 347-356. https://doi.org/10.1080/19386362.2016.1277829
  68. Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E. T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., 22(4), 413-424. https://doi.org/10.12989/SSS.2018.22.4.413
  69. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength", Steel Compos Struct., 21(3), 679-688. https://doi.org/10.12989/scs.2016.21.3.679
  70. Sajedi, F. and Shariati, M. (2019), "Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping", Steel Compos Struct., 30(5), 417-432. https://doi.org/10.12989/SCS.2019.30.5.417
  71. Sari, P. A., Suhatril, M., Osman, N., Mu'azu, M., Dehghani, H., Sedghi, Y., Safa, M., Hasanipanah, M., Wakil, K. and Khorami, M. (2018), "An intelligent based-model role to simulate the factor of safe slope by support vector regression", Eng. Comput., 1-11.
  72. Schumacher, T. and Shariati, A. (2013), "Monitoring of structures and mechanical systems using virtual visual sensors for video analysis: Fundamental concept and proof of feasibility", Sensor., 13(12), 16551-16564. https://doi.org/10.3390/s131216551
  73. Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Moghimi Azar, V., Toghroli, A., Safa, M., Tonnizam Mohamad, E., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., 22(3), 335-340. https://doi.org/10.12989/SSS.2018.22.3.335
  74. Shah, S., Sulong, N.R., Jumaat, M. and Shariati, M. (2016), "State-of-the-art review on the design and performance of steel pallet rack connections", Eng. Fail. Anal., 66, 240-258. https://doi.org/10.1016/j.engfailanal.2016.04.017
  75. Shah, S., Sulong, N.R., Khan, R., Jumaat, M. and Shariati, M. (2016), "Behavior of industrial steel rack connections", Mech. Syst. Signal Pr., 70, 725-740. https://doi.org/10.1016/j.ymssp.2015.08.026
  76. Shah, S., Sulong, N.R., Shariati, M. and Jumaat, M. (2015), "Steel rack connections: Identification of most influential factors and a comparison of stiffness design methods", PloS one, 10(10), e0139422. https://doi.org/10.1371/journal.pone.0139422
  77. Shah, S., Sulong, N.R., Shariati, M., Khan, R. and Jumaat, M. (2016), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin Wall. Struct., 106, 471-483. https://doi.org/10.1016/j.tws.2016.05.021
  78. Shahabi, S., Sulong, N., Shariati, M. and Shah, S. (2016), "Performance of shear connectors at elevated temperatures-A review", Steel Compos. Struct., 20(1), 185-203. https://doi.org/10.12989/scs.2016.20.1.185
  79. Shahabi, S., Sulong, N., Shariati, M., Mohammadhassani, M. and Shah, S. (2016), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel Compos. Struct., 20(3), 651-669. https://doi.org/10.12989/scs.2016.20.3.651
  80. Shao, Z. and Vesel, A. (2015), "Modeling the packing coloring problem of graphs", Appl. Math. Model., 39(13), 3588-3595. https://doi.org/10.1016/j.apm.2014.11.060
  81. Shao, Z., Gholamalizadeh, E., Boghosian, A., Askarian, B. and Liu, Z. (2019), "The chiller's electricity consumption simulation by considering the demand response program in power system", Appl. Therm. Eng., 149, 1114-1124. https://doi.org/10.1016/j.applthermaleng.2018.12.121
  82. Shao, Z., Wakil, K., Usak, M., Amin Heidari, M., Wang, B. and Simoes, R. (2018), "Kriging Empirical Mode Decomposition via support vector machine learning technique for autonomous operation diagnosing of CHP in microgrid", Appl. Therm. Eng., 145, 58-70. https://doi.org/10.1016/j.applthermaleng.2018.09.028
  83. Shariat, M., Shariati, M., Madadi, A. and Wakil, K. (2018), "Computational lagrangian multiplier method using optimization and sensitivity analysis of rectangular reinforced concrete beams", Steel Compos. Struct., 29(2), 243-256. https://doi.org/10.12989/SCS.2018.29.2.243
  84. Shariat, M., Shariati, M., Madadi, A. and Wakil, K. (2018), "Computational lagrangian multiplier method by using for optimization and sensitivity analysis of rectangular reinforced concrete beams", Steel Compos. Struct., 29(2), 243-256. https://doi.org/10.12989/SCS.2018.29.2.243
  85. Shariati, A. (2014), "Behaviour of C-shaped angle shear connectors in high strength concrete", M.SC, Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
  86. Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Shariati, M. (2012), "Various types of shear connectors in composite structures: A review", Int. J. Phys. Sci., 7(22), 2876-2890.
  87. Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Shariati, M. (2012), "Investigation of channel shear connectors for composite concrete and steel T-beam", Int. J. Phys. Sci., 7(11), 1828-1831.
  88. Shariati, A., Shariati, M., Ramli Sulong, N.H., Suhatril, M., Arabnejad Khanouki, M.M. and Mahoutian, M. (2014), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Constr. Build. Mater., 52, 276-283. https://doi.org/10.1016/j.conbuildmat.2013.11.036
  89. Shariati, M. (2008), "Assessment of building using none-destructive test techniques (ultra Sonic Pulse Velocity and Schmidt Rebound Hammer)", Universiti Putra Malaysia.
  90. Shariati, M. (2013), "Behaviour of C-shaped shear connectors in stell concrete composite beams", Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
  91. Shariati, M., Ramli Sulong, N., Arabnejad Khanouki, M. and Shariati, A. (2011), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM'11+), Seoul, South Korea.
  92. Shariati, M., Ramli Sulong, N., Maleki, S. and Arabnejad Kh, M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel & Composite Structures.
  93. Shariati, M., Ramli Sulong, N., Suhatril, M., Shariati, A., Arabnejad Khanouki, M. and Sinaei, H. (2012), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Fifth International Conference on Engineering Failure Analysis.
  94. Shariati, M., Ramli Sulong, N., Suhatril, M., Shariati, A., Arabnejad Khanouki, M. and Sinaei, H. (2012), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Fifth International Conference on Engineering Failure Analysis, Hilton Hotel, The Hague, July.
  95. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel & Composite Structures, Sydney, July.
  96. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2012), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. https://doi.org/10.1016/j.matdes.2011.08.008
  97. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Mahoutian, M. (2011), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Scientif. Res. Essay., 6(4), 977-983.
  98. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Shariati, A. (2011), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM'11+), Seoul, South Korea.
  99. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M., Shafigh, P. and Sinaei, H. (2011), "Assessing the strength of reinforced concrete structures through Ultrasonic Pulse Velocity and Schmidt Rebound Hammer tests", Scientif. Res. Essay., 6(1), 213-220.
  100. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Khanouki, M.A. (2015), "Behavior of V-shaped angle shear connectors: experimental and parametric study", Mater. Struct., 49(9), 3909-3926.
  101. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Kueh, A.B.H. (2016), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392. https://doi.org/10.1016/j.conbuildmat.2016.05.102
  102. Shariati, M., Ramli Sulong, N.H., Sinaei, H., Arabnejad Khanouki, M.M. and Shafigh, P. (2011), "Behavior of channel shear connectors in normal and light weight aggregate concrete (Experimental and analytical study)", Adv. Mater. Res., 168, 2303-2307. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2303
  103. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Constr. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050
  104. Shariati, M., Shariati, A., Sulong, N.R., Suhatril, M. and Khanouki, M.A. (2014), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail. Anal., 41, 124-134. https://doi.org/10.1016/j.engfailanal.2014.02.017
  105. Shariati, M., Sulong, N.R., Kh, M.A. and Mahoutian, M. (2011), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Scientif. Res. Essay., 6(4), 977-983.
  106. Shariati, M., Sulong, N.R., Shariati, A. and Khanouki, M.A. (2016), "Behavior of V-shaped angle shear connectors: experimental and parametric study", Mater. Struct., 49(9), 3909-3926. https://doi.org/10.1617/s11527-015-0762-8
  107. Shariati, M., Sulong, N.R., Shariati, A. and Kueh, A. (2016), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392. https://doi.org/10.1016/j.conbuildmat.2016.05.102
  108. Shariati, M., Sulong, N.R., Suhatril, M., Shariati, A., Khanouki, M.A. and Sinaei, H. (2012), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Des., 41, 67-73. https://doi.org/10.1016/j.matdes.2012.04.039
  109. Shariati, M., Tahir, M.M., Wee, T.C., Shah, S.N.R., Jalali, A., Abdullahi, M.A.M. and Khorami, M. (2018), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Fail. Anal., 85, 149-166. https://doi.org/10.1016/j.engfailanal.2017.08.014
  110. Shariati, M., Toghroli, A., Jalali, A. and Ibrahim, Z. (2017), "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering-CSM 2017.
  111. Shariati, M., Trung, N.T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Stuct., 31(5), 427-435.
  112. Shi, X., Hassanzadeh-Aghdam, M.K. and Ansari, R. (2019), "Viscoelastic analysis of silica nanoparticle-polymer nanocomposites", Compos. Part B: Eng., 158, 169-178. https://doi.org/10.1016/j.compositesb.2018.09.084
  113. Shi, X., Jaryani, P., Amiri, A., Rahimi, A. and Malekshah, E.H. (2019), "Heat transfer and nanofluid flow of free convection in a quarter cylinder channel considering nanoparticle shape effect", Powder Technol., 346, 160-170. https://doi.org/10.1016/j.powtec.2018.12.071
  114. Shi, Y.X., Matsui, I. and Guo, Y.J. (2004), "A study on the effect of fine mineral powders with distinct vitreous contents on the fluidity and rheological properties of concrete", Cement Concrete Res., 34(8), 1381-1387. https://doi.org/10.1016/j.cemconres.2003.12.031
  115. Sinaei, H., Jumaat, M.Z. and Shariati, M. (2011), "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579.
  116. Sinaei, H., Shariati, M., Abna, A., Aghaei, M. and Shariati, A. (2012), "Evaluation of reinforced concrete beam behaviour using finite element analysis by ABAQUS", Scientif. Res. Essay., 7(21), 2002-2009.
  117. Tahmasbi, F., Maleki, S., Shariati, M., Ramli Sulong, N.H. and Tahir, M.M. (2016), "Shear capacity of C-shaped and L-shaped angle shear connectors", PLoS One, 11(8), e0156989. https://doi.org/10.1371/journal.pone.0156989
  118. Toghroli, A. (2015), "Applications of the ANFIS and LR models in the prediction of shear connection in composite beams", Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
  119. Toghroli, A., Darvishmoghaddam, E., Zandi, Y., Parvan, M., Safa, M., Abdullahi, M., Heydari, A., Wakil, K., Gebreel, S. A. and Khorami, M. (2018), "Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method", Comput. Concrete, 21(5), 525-530. https://doi.org/10.12989/CAC.2018.21.5.525
  120. Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., 17(5), 623-639. https://doi.org/10.12989/scs.2014.17.5.623
  121. Toghroli, A., Shariati, M., Karim, M.R. and Ibrahim, Z. (2017), "Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2017, Zurich, Switzerland.
  122. Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Mohamad, E.T. and Khorami, M. (2018), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., 22(4), 433-440. https://doi.org/10.12989/SSS.2018.22.4.433
  123. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2018), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intel. Manuf., 29(8), 1793-1801. https://doi.org/10.1007/s10845-016-1217-y
  124. Trung, N.T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech., 70(5), 639-647. https://doi.org/10.12989/SEM.2019.70.5.639
  125. Vali, R., Mehrinejad Khotbehsara, E., Saberian, M., Li, J., Mehrinejad, M. and Jahandari, S. (2019), "A three-dimensional numerical comparison of bearing capacity and settlement of tapered and under-reamed piles", Int. J. Geotech. Eng., 13(3), 236-248. https://doi.org/10.1080/19386362.2017.1336586
  126. Vo-Van, T., Nguyen-Thoi, T., Vo-Duy, T., Ho-Huu, V. and Nguyen-Trang, T. (2017), "Modified genetic algorithm-based clustering for probability density functions", J. Stat. Comput. Simul., 87(10), 1964-1979. https://doi.org/10.1080/00949655.2017.1300663
  127. Wei, X., Shariati, M., Zandi, Y., Pei, S., Jin, Z., Gharachurlu, S., Abdullahi, M., Tahir, M. and Khorami, M. (2018), "Distribution of shear force in perforated shear connectors", Steel Compos. Struct., 27(3), 389-399. https://doi.org/10.12989/SCS.2018.27.3.389
  128. Xie, Q., Sinaei, H., Shariati, M., Khorami, M., Mohamad, E.T. and Bui, D.T. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel Compos. Struct., 30(5), 433-441. https://doi.org/10.12989/SCS.2019.30.5.433
  129. Xu, C., Zhang, X., Haido, J.H., Mehrabi, P., Shariati, A., Mohamad, E.T., ... & Wakil, K. (2019), "Using genetic algorithms method for the paramount design of reinforced concrete structures", Struct. Eng. Mech., 71(5), 503-513. https://doi.org/10.12989/sem.2019.71.5.503
  130. Young, J.F., Mindess, S. and Darwin, D. (2002), Concrete, Prentice Hall.
  131. Zandi, Y., Shariati, M., Marto, A., Wei, X., Karaca, Z., Dao, D., Toghroli, A., Hashemi, M.H., Sedghi, Y. and Wakil, K. (2018), "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake", Steel Compos. Struct., 28(4), 439-447. https://doi.org/10.12989/SCS.2018.28.4.439
  132. Zhao, J.M., Chen, Z.G., Mehrmashhadi, J. and Bobaru, F. (2018), "Construction of a peridynamic model for transient advection-diffusion problems", Int. J. Heat Mass Transf., 126, 1253-1266. https://doi.org/10.1016/j.ijheatmasstransfer.2018.06.075
  133. Ziaei-Nia, A., Shariati, M. and Salehabadi, E. (2018), "Dynamic mix design optimization of high-performance concrete", Steel Compos. Struct., 29(1), 67-75. https://doi.org/10.12989/SCS.2018.29.1.067

피인용 문헌

  1. Elevated temperature resistance of concrete columns with axial loading vol.9, pp.4, 2019, https://doi.org/10.12989/acc.2020.9.4.355
  2. Computational analysis of three dimensional steel frame structures through different stiffening members vol.35, pp.2, 2019, https://doi.org/10.12989/scs.2020.35.2.187
  3. Effect of progressive shear punch of a foundation on a reinforced concrete building behavior vol.35, pp.2, 2019, https://doi.org/10.12989/scs.2020.35.2.279
  4. Influence of porosity and cement grade on concrete mechanical properties vol.10, pp.5, 2019, https://doi.org/10.12989/acc.2020.10.5.393
  5. The compressive strength of concrete retrofitted with wind ash and steel slag pozzolans with a water-cement based polymers vol.11, pp.6, 2021, https://doi.org/10.12989/acc.2021.11.6.507
  6. Optimization algorithms for composite beam as smart active control of structures using genetic algorithms vol.27, pp.6, 2019, https://doi.org/10.12989/sss.2021.27.6.1041
  7. Investigating the effect of using three pozzolans separately and in combination on the properties of self-compacting concrete vol.11, pp.2, 2019, https://doi.org/10.12989/anr.2021.11.2.141
  8. Application of multi-hybrid metaheuristic algorithm on prediction of split-tensile strength of shear connectors vol.28, pp.2, 2019, https://doi.org/10.12989/sss.2021.28.2.167