Structural Engineering and Mechanics

  • 제72권3호
  • /
  • Pages.383-393
  • /
  • 2019
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental and numerical investigation of reinforced concrete beams containing vertical openings

  • 투고 : 2018.12.24
  • 심사 : 2019.06.20
  • 발행 : 2019.11.10
⟨ 이전 논문 다음 논문 ⟩

초록

Horizontal openings in reinforced concrete (RC) beams are quite often used to accommodate service pipelines. Several research papers are available in the literature describing their effect. RC beams with vertical openings are commonly used to accommodate service lines in residential buildings in Kuwait. However, there are lack of design guidelines and best practices reported in the literature for RC beams with vertical openings, whereas the detailed guidelines are available for beams with horizontal openings. In the present paper, laboratory experiments are conducted on nine RC beams with and without vertical openings. Parametric study has been carried out using nonlinear finite element analysis (FEA) with changes in the diameter of the opening, various positions of the opening along the length and width of the beam, edge distance, etc. 50 finite element simulations were conducted. The FEA results are verified using the results from the laboratory experiments. The study showed that the load carrying capacity of the beam is reduced by 20% for the RC beam with vertical openings placed near the center of the beam compared to a solid beam without an opening. Significant reduction in load carrying capacity is observed for beams with an opening near the support (${\approx}15%$). The overall stiffness of the beam, crack pattern and failure modes were not affected due to the presence of the vertical opening. Furthermore, an artificial neural network (ANN) analysis is carried out using the FEA generated data. The results and observations from the ANN and FEA are in good agreement with experimental results.

키워드

참고문헌

  1. Alvanitopoulos P.F., Andreadis I. and Elenas A. (2010), "Interdependence between damage indices and ground motion parameters based on Hilbert-Huang transform", Measure. Sci. Technol., 21(2), 025101-025115. https://doi.org/10.1088/0957-0233/21/2/025101.
  2. Chen, X., Nie, G.J., Jia, L.J. and Sun, B. (2013), "Approximate calculation of nature frequency of partially earth-anchored cablestayed bridges", Chinese Quarterly Mech., 34(4), 650-655.
  3. Gimsing, N.J. and Georgakis, C.T. (2012), Cable-Supported Bridges: Concept and Design, John Wiley & Sons Ltd, Chichester, United Kingdom.
  4. Jin, Z.B., Pei, S.L., Wei, X., Liu, H. and Qiang, S. (2016), "Partially earth-anchored cable bridge: Ultra long-span system suitable for carbon-fiber-reinforced plastic cables", J. Bridge Eng., 21(6), https://doi.org/10.1061/(ASCE)BE.1943-5592.0000877.
  5. JTG D65-01 (2007), Guidelines for design of Highway Cable-stayed Bridge, Ministry of Communications, Beijing, China.
  6. JTG T B02-01 (2008), Guidelines for Seismic Design of Highway Bridges, Ministry of Communications, Beijing, China.
  7. Muller, J. (1991), "Bi-stayed Cable-stayed Bridge", International Conference on Bridge, 455-460. Leningrad, Russia.
  8. Shao, X.D., Hu, J. and Zhao, H. (2011), "Conceptual design of super-span cable-stayed bridge with partial ground-anchorage and cross stays", J. Chongqing Jiatong U (Natural Sci.), 30(S2), 1188-1191.
  9. Sun, B., Cheng, J. and Xiao, R.C. (2010), "Preliminary design and parametric study of a 1400 m partially earth-anchored cable-stayed bridge", Sci. China Series E Technol. Sci., 53(2), 502-511. https://doi.org/10.1007/s11431-010-0041-4.
  10. Sun, B., Xiao, R.C. and Cai, C.S. (2013), "Cost analysis of partially earth-anchored cable-stayed bridge", J. Tongji U (Natural Sci.), 41(10), 1476-1482.
  11. Sun, B., Cheng, J. and Xiao, R.C. (2015), "Optimization of dead load state in earth-anchored cable-stayed bridges", J. Harbin Institute Technol., 22(3), 87-94.
  12. Won, J.H., Park, S.J., Yoon, J.H. and Kim, S. (2008a), "Structural effects of partially earth-anchored cable system on medium span cable-stayed bridges", J. Steel Struct., 8(3), 225-236.
  13. Won, J.H., Yoon, J.H., Park, S.J. and Kim, S. (2008b), "Effects of partially earth-anchored cable system on dynamic wind response of cable-stayed bridges", Wind Struct., 11(6), 441-453. https://doi.org/10.12989/was.2008.11.6.441.
  14. Xiang, H.F. (2012), "The trend of the world's mega-scale bridges-An inspiration of IABSE 2011 in London", Bridge, 3, 12-16.
  15. Xiao, R.C. (2013), Bridge Structural Systems, China Communications Press, Beijing, 166-174.
  16. Xiao, R.C., Wei, P. and Sun, B. (2013), "Mechanical analysis and parametric study of long-span partially earth-anchored cable-stayed bridge", J. Southeast U (Natural Sci.), 43(5), 1097-1103.
  17. Zhang, L.W., Xiao, R.C. and Xia, R.J. (2011), "Mechanical analysis and study on structural parameter of partially earth-anchored cable-stayed bridge part I: Mechanical analysis", Appl. Mech. Mater., 44, 1898-1905. https://doi.org/10.4028/www.scientific.net/AMM.44-47.1898.
  18. Zhang, X.J. and Yao, M. (2015), "Numerical investigation on the wind stability of super long-span partially earth-anchored cable-stayed bridges", Wind Struct., 21(4), 407-424. https://doi.org/10.12989/was.2015.21.4.407.
  19. Zhang, X.J. and Yu, Z.J. (2015), "Study of seismic performance of cable-stayed-suspension hybrid bridges", Struct. Eng. Mech., 55(6), 1203-1221. https://doi.org/10.12989/sem.2015.55.6.1203.