DOI QR코드

DOI QR Code

Total joint reconstruction using computer-assisted surgery with stock prostheses for a patient with bilateral TMJ ankylosis

  • Rhee, Seung-Hyun (Department of Oral and Maxillofacial Surgery, Seoul National University, Dental Hospital) ;
  • Baek, Seung-Hak (Department of Orthodontics, School of Dentistry, Dental Research Institute, Seoul National University) ;
  • Park, Sang-Hun (Department of Oral and Maxillofacial Surgery, Seoul National University, Dental Hospital) ;
  • Kim, Jong-Cheol (Mir Dental Hospital) ;
  • Jeong, Chun-Gi (FACEGIDE, Division of Digital Business, Megagen Implant) ;
  • Choi, Jin-Young (Department of Oral and Maxillofacial Surgery, School of Dentistry, Dental Research Institute, Seoul National University)
  • 투고 : 2019.08.01
  • 심사 : 2019.08.27
  • 발행 : 2019.12.31

초록

Backgrounds: The purpose of this study is to discuss the total joint reconstruction surgery for a patient with recurrent ankylosis in bilateral temporomandibular joints (TMJs) using three-dimensional (3D) virtual surgical planning, computer-aided manufacturing (CAD/CAM)-fabricated surgical guides, and stock TMJ prostheses. Case presentation: A 66-year-old female patient, who had a history of multiple TMJ surgeries, complained of severe difficulty in eating and trismus. The 3D virtual surgery was performed with a virtual surgery software (FACEGIDE, MegaGen implant, Daegu, South Korea). After confirmation of the location of the upper margin for resection of the root of the zygoma and the lower margin for resection of the ankylosed condyle, and the position of the fossa and condyle components of stock TMJ prosthesis (Biomet, Jacksonville, FL, USA), the surgical guides were fabricated with CAD/CAM technology. Under general anesthesia, osteotomy and placement of the stock TMJ prosthesis (Biomet) were carried out according to the surgical planning. At 2 months after the operation, the patient was able to open her mouth up to 30 mm without complication. Conclusion: For a patient who has recurrent ankylosis in bilateral TMJs, total joint reconstruction surgery using 3D virtual surgical planning, CAD/CAM-fabricated surgical guides, and stock TMJ prostheses may be an effective surgical treatment option.

키워드

참고문헌

  1. Roychoudhury A, Parkash H, Trikha A (1999) Functional restoration by gap arthroplasty in temporomandibular joint ankylosis: a report of 50 cases. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 87:166-169 https://doi.org/10.1016/S1079-2104(99)70267-2
  2. Zhang X, Chen M, Wu Y, Wang B, Yang C (2011) Management of temporomandibular joint ankylosis associated with mandibular asymmetry in infancy. J Craniofac Surg 22:1316-1319 https://doi.org/10.1097/SCS.0b013e31821c9342
  3. Movahed R, Mercuri LG (2015) Management of temporomandibular joint ankylosis. Oral Maxillofac Surg Clin North Am 27:27-35 https://doi.org/10.1016/j.coms.2014.09.003
  4. Wolford LM (1997) Temporomandibular joint devices: treatment factors and outcomes. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 83:143-149 https://doi.org/10.1016/S1079-2104(97)90105-0
  5. Posnick JC, Goldstein JA (1993) Surgical management of temporomandibular joint ankylosis in the pediatric population. Plast Reconstr Surg 91:791-798 https://doi.org/10.1097/00006534-199304001-00006
  6. Nitzan DW, Bar-Ziv J, Shteyer A (1998) Surgical management of temporomandibular joint ankylosis type III by retaining the displaced condyle and disc. J Oral Maxillofac Surg 56:1133-1138 https://doi.org/10.1016/S0278-2391(98)90753-4
  7. Lindqvist C, Pihakari A, Tasanen A, Hampf G (1986) Autogenous costochondral grafts in temporomandibular joint arthroplasty: A survey of 66 arthroplasties in 60 patients. J Maxillofac Surg 14:143-149 https://doi.org/10.1016/S0301-0503(86)80280-6
  8. Ware W, Taylor R (1966) Cartilaginous growth centers transplanted to replace mandibular condyles in monkeys. J Oral Surgery (American Dental Association: 1965) 24:33
  9. MacIntosh RB (2000) The use of autogenous tissues for temporomandibular joint reconstruction. J Oral Maxillofac Surg 58:63-69 https://doi.org/10.1016/S0278-2391(00)80019-1
  10. Burgess M, Bowler M, Jones R, Hase M, Murdoch B (2014) Improved outcomes after alloplastic TMJ replacement: analysis of a multicenter study from Australia and New Zealand. J Oral Maxillofac Surg 72:1251-1257 https://doi.org/10.1016/j.joms.2014.02.019
  11. Sanovich R, Mehta U, Abramowicz S, Widmer C, Dolwick M (2014) Total alloplastic temporomandibular joint reconstruction using Biomet stock prostheses: the University of Florida experience. Int J Oral Maxillofac Surg 43:1091-1095 https://doi.org/10.1016/j.ijom.2014.04.008
  12. Gerbino G, Zavattero E, Bosco G, Berrone S, Ramieri G (2017) Temporomandibular joint reconstruction with stock and custom-made devices: Indications and results of a 14-year experience. J Craniomaxillofac Surg 45:1710-1715 https://doi.org/10.1016/j.jcms.2017.07.011
  13. Aagaard E, Thygesen T (2014) A prospective, single-centre study on patient outcomes following temporomandibular joint replacement using a custommade Biomet TMJ prosthesis. Int J Oral Maxillofac Surg 43:1229-1235 https://doi.org/10.1016/j.ijom.2014.05.019
  14. Gerbino G, Zavattero E, Berrone S, Ramieri G (2016) One stage treatment of temporomandibular joint complete bony ankylosis using total joint replacement. J. Craniomaxillofac. Surg. 44:487-492 https://doi.org/10.1016/j.jcms.2016.01.003

피인용 문헌

  1. Counter-Clockwise Rotation of Maxillomandibular Complex and Customized Joint Reconstruction as a Single Stage Management for Facial Deformity in Temporomandibular Joint Ankylosis: A 2 Year Follow-Up vol.6, 2019, https://doi.org/10.1177/24727512211032876
  2. Stability of the Natural Joint Side in Unilateral Alloplastic Total Temporomandibular Joint Replacement Using a Ready-Made System vol.11, pp.9, 2019, https://doi.org/10.3390/app11093935
  3. A Preliminary Analysis of the Wear Pathways of Sliding Contacts on Temporomandibular Joint Total Joint Replacement Prostheses vol.11, pp.5, 2019, https://doi.org/10.3390/met11050685
  4. Correction of facial asymmetry using a patient-specific three-dimensional printed polycarprolactone/beta tricalcium phosphate scaffold: a case report vol.45, pp.3, 2019, https://doi.org/10.21851/obr.45.03.202109.143