Smart Structures and Systems

  • 제24권4호
  • /
  • Pages.491-506
  • /
  • 2019
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Earthquake effect on the concrete walls with shape memory alloy reinforcement

  • Beiraghi, Hamid (Department of Civil Engineering, Mahdishahr Branch, Islamic Azad University)
  • 투고 : 2018.12.31
  • 심사 : 2019.08.03
  • 발행 : 2019.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

Literature regarding concrete walls reinforced by super elastic shape memory alloy (SMA) bars is rather limited. The seismic behavior of a system concurrently including a distinct steel reinforced concrete (RC) wall, as well as another wall reinforced by super elastic SMA at the first story, and steel rebar at upper stories, would be an interesting matter. In this paper, the seismic response of such a COMBINED system is compared to a conventional system with steel RC concrete walls (STEEL-Rein.) and also to a wall system with SMA rebar at the first story and steel rebar at other stories ( SMA-Rein.). Nonlinear time history analysis at maximum considered earthquake (MCE) and design bases earthquake (DBE) levels is conducted and the main responses like maximum inter-story drift ratio and residual inter-story drift ratio are investigated. Furthermore, incremental dynamic analysis is used to accomplish probabilistic seismic studies by creating fragility curves. Results demonstrated that the SMA-Rein. system, subjected to DBE and MCE ground motions, has almost zero and 0.27% residual maximum inter-story drifts, while the values for the COMBINED system are 0.25% and 0.51%. Furthermore, fragility curves show that using SMA rebar at the base of all walls causes a larger probability of exceedance 3% inter-story drift limit state compared to the COMBINED system. Static push over analysis demonstrated that the strength of the COMBINED model is almost 0.35% larger than that of the two other models, and its general post-yielding stiffness is also approximately twice the corresponding stiffness of the two other models.

키워드

참고문헌

  1. ACI 318-14, (2014), "Building code requirements for structural concrete and commentary", ACI Committee 318, Farmington Hills.
  2. Alam, M.S., Nehdi, M. and Youssef, M.A. (2008), "Seismic performance of concrete frame structures reinforced with superelastic shape memory alloys", Smart Struct. Syst., 5(5), 565-585. http://dx.doi.org/10.12989/sss.2009.5.5.565.
  3. American Concrete Institute (ACI). (2013), "Guide for testing reinforced concrete structural elements under slowly applied simulated seismic loads" ACI committee 374. ACI 374.2R-13. Michigan, United States.
  4. Auricchio, F. and Sacco, E. (1997), "A superelastic shapememory-alloy beam", J. Intel. Mat. Str., 8(6), 489-501. https://doi.org/10.1177/1045389X9700800602.
  5. Applied Technology Council, (2010), "ATC-72: Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings", ATC, Redwood City, CA.
  6. ASCE/SEI 7-2010 (2010), "Minimum design loads for buildings and other structures", American Society of Civil Engineers. Reston, VA.
  7. ASCE/SEI 41-13, (2014), "Seismic rehabilitation of existing buildings", American Society of Civil Engineers, Reston, VA.
  8. Abdulridha, A., Palermo, D., Foo, S. and Vecchio, F.J. (2013), "Behavior and modeling of superelastic shape memory alloy reinforced concrete beams", Eng. Struct., 49, 893-904. https://doi.org/10.1016/j.engstruct.2012.12.041.
  9. Abdulridha A, Palermo D. (2017), "Behaviour and modelling of hybrid SMA-steel reinforced concrete slender shear wall", Eng Struct, 147, 77-89. http://dx.doi.org/10. 1016/j.engstruct. https://doi.org/10.1016/j.engstruct.2017.04.058
  10. Alam, M.S., Nehdi, M. and Youssef, M.A. (2009), "Seismic performance of concrete frame structures reinforced with superelastic shape memory alloys", Smart Struct. Syst., 5(5), 565-585. http://dx.doi.org/10.12989/sss.2009.5.5.565.
  11. Baker, J.W. (2015), "Efficient analytical fragility function fitting using dynamic structural analysis", Earthq. Spectra, 31(1), 579-599. https://doi.org/10.1193/021113EQS025M.
  12. Bradley, B.A. (2013), "Practice-oriented estimation of the seismic demand hazard using ground motions at few intensity levels", Earthq. Eng. Struct. D., 42(14), 2167-2185. https://doi.org/10.1002/eqe.2319.
  13. Building Seismic Safety Council (BSSC). (2003), NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures: FEMA 450; BSSC: Washington, DC, USA.
  14. Beiraghi, H. and Siahpolo, N. (2016), "Seismic assessment of RC core-wall building capable of three plastic hinges with outrigger", Struct. Des. Tall Spec. Build., 26(2):e1306. https://doi.org/10.1002/tal.1306.
  15. Beiraghi, H, (2017), "Earthquake effects on the energy demand of tall reinforced concrete walls with buckling-restrained brace outriggers", Struct. Eng. Mech.. 63(4), 521-536. https://doi.org/10.12989/sem.2017.63.4.521.
  16. Beiraghi H, (2018a), "Energy dissipation of reinforced concrete wall combined with buckling-restrained braces subjected to near- and far-fault earthquakes", Iran J Sci Technol Trans Civ Eng., 42(4), 345-359 https://doi.org/10.1007/s40996-018-0109-0
  17. Beiraghi, H. (2018b), "Energy demands in reinforced concrete wall piers coupled by buckling restrained braces subjected to near-fault earthquake", Steel Compos. Struct., 27(6), 703-716. https://doi.org/10.12989/scs.2018.27.6.703.
  18. Beiraghi, H, (2018c), "Reinforced concrete core-walls connected by a bridge with buckling restrained braces subjected to seismic loads", Earthq. Struct., 15(2), 203-214. https://doi.org/10.12989/eas.2018.15.2.203.
  19. Beiraghi, H, (2018d), "Near-fault ground motion effects on the responses of tall reinforced concrete walls with bucklingrestrained brace outriggers", Scientia Iranica A, 25(4), 1987-1999. DOI:10.24200/sci.2017.4205.
  20. CSA Standard A23.3-04, (2005), Design of concrete structures. Canadian Standard Association: Rexdale, Canada, 214 pp.
  21. Chancellor, N.B., Eatherton, M.R., Roke, D.A. and Akbas, T. (2014), "Self-centering seismic lateral force resisting systems: high performance structures for the city of tomorrow", Buildings, 4(3), 520-548. http://dx.doi.org/10.3390/buildings4030520.
  22. Cruz Noguez, C.A. and Saiidi, M.S. (2013), "Performance of advanced materials during earthquake loading tests of a bridge system", J Struct Eng., 139(1), 144-154. http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0000611.
  23. Cortes-Puentes, W.L. and Palermo, D. (2017), "SMA tension brace for retrofitting concrete shear walls", Eng Struct, 140, 177-188. http://dx.doi.org/10.1016/j.engstruct.2017.02.045.
  24. Cortes-Puentes, W.L. and Palermo D, (2018), "Seismic retrofit of concrete shear walls with SMA tension braces", J. Struct. Eng., 144(2), 04017200. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001936.
  25. CEN EC8, (2004), Design of Structures for Earthquake Resistance. European Committee for Standardization: Brussels, Belgium.
  26. Dhakal, R.P., Mander, J.B. and Mashiko, N. (2006), "Identification of critical ground motions for seismic performance assessment of structures", Earthq. Eng. Struct. D., 35(8), 989-1008. https://doi.org/10.1002/eqe.568
  27. Elwood, K.J. (2013), "Performance of concrete buildings in the 22 February 2011 Christchurch earthquake and implications for Canadian codes", Can. J. Civ. Eng., 40(8), 759-776. http://dx.doi.org/10.1139/cjce-2011-0564.
  28. Eberhard, M.O. and Sozen, M.A. (1993), "Member behaviorbased method to determine design shear in earthquake-resistant walls", J. Struct. Eng., 119(2), 619-640. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:2(619).
  29. ETABS, Version 13.1.1. (2013), Computers and Structures. Inc.: Berkeley, California, USA
  30. Eguchi, R.T.; Goltz, J.D.; Taylor, C.E.; Chang, S.E., Flores, P.J.; Johnson, L.A. and Blais, N.C. (1998), "Direct economic losses in the Northridge earthquake: A three-year post-event perspective", Earthq. Spectra, 14(2), 245-264. https://doi.org/10.1193/1.1585998.
  31. Eads, L., Miranda, E., Krawinkler, H. and Lignos, D.G., (2013), "An efficient method for estimating the collapse risk of structures in seismic regions., Earthq. Eng. Struct. D., 42(1), 25-41. https://doi.org/10.1002/eqe.2191.
  32. FEMA P695, (2009), Quantification of Building Seismic Performance Factors (ATC-63 Project). Federal Emergency Management Agency, Washington D.C.
  33. FEMA P-58. (2012), Seismic Performance Assessment of Buildings, Volume 1 - Methodology. Federal Emergency Management Agency: Washington D.C.
  34. Federal Emergency Management Agency (FEMA). (2000), Prestandard and commentary for the seismic rehabilitation of buildings. FEMA 356. Washington, D.C.
  35. Fintel M. (1995), "Performance of buildings with shear walls in earthquakes of the last thirty years., PCI J., 40(3), 62-80. https://doi.org/10.15554/pcij.05011995.62.80
  36. Ghassemieh, M., Bahaari, M.R., Ghodratian, S.M. and Nojoumi, S.A. (2012), "Improvement of concrete shear wall structures by smart materials., Open J. Civil Eng., 2(3), 87-95. https://doi.org/10.4236/ojce.2012.23014
  37. Ghorbanirenani, I., Tremblay, R., Leger, P. and Leclerc, M. (2012), "Shake table testing of slender rc shear walls subjected to eastern north america seismic ground motions., J. Struct. Eng., 138(12), 1515-1529. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000581.
  38. Ghosh, S.K. (1995), "Observations on the performance of structures in the kobe earthquake of January 17, 1995., PCI J., 40(2), 14-22. https://doi.org/10.15554/pcij.03011995.14.22
  39. Ibarra, L.F. and Krawinkler, H. (2005), Global Collapse of Frame Structures under Seismic Excitations, John A. Blume Earthquake Engineering Center, Stanford, CA, 324.
  40. Janke, L., Czaderski, C., Motavalli, M. and Ruth, J. (2005), "Applications of shape memory alloys in civil engineering structures. overviews, limits and new ideas., Mater. Struct., 38, 578-592. https://doi.org/10.1007/BF02479550
  41. Katariya, P.V., Panda, S.K., Hirwani, C.K., Mehar, K. and Thakare, O. (2017), "Enhancement of thermal buckling strength of laminated sandwich composite panel structure embedded with shape memory alloy fibre., Smart Struct. Syst., 20(5), 595-605. https://doi.org/10.12989/sss.2017.20.5.595.
  42. Kruep, S.J. (2007), Using incremental dynamic analysis to visualize the effects of viscous fluid dampers on steel moment frame drift. Master's Thesis. Virginia Polytechnic Institute and State University, Blacksburg, VA.
  43. Hamdaoui, K., Benadla, Z., Chitaoui, H. and Benallal, M.E. (2019), "Dynamic behavior of a seven century historical monument reinforced by shape memory alloy wires., Smart Struct. Syst., 23(4), 337-345. https://doi.org/10.12989/sss.2019.23.4.337.
  44. LATBSDC, (2011), "An Alternative Procedure For Seismic Analysis and Design of Tall Buildings Located in the Los Angeles Region., Los Angeles Tall Buildings Structural Design Council.
  45. Luu, H., Ghorbanirenani, I., Leger, P. and Tremblay, R. (2013), "Numerical modeling of slender reinforced concrete shear wall shaking table tests under high-frequency ground motions., J. Earthq. Eng., 17(4), 517-542. https://doi.org/10.1080/13632469.2013.767759.
  46. McCormick, J., Aburano, H., Ikenaga, M. and Nakashima, M. (2008), "Permissible residual deformation level for building structures considering both safety and human elements., Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China. Paper ID 05-06-0071.
  47. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete., J. Struct. Eng., ASCE, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
  48. McCormick, J., Tyber, J., DesRoches, R., Gall, K. and Maier, H.J. (2007), "Structural engineering with NiTi. II: mechanical behavior and scaling., J. Eng. Mech., 133(9), 1019-1029. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:9(1019).
  49. Menegotto, M. and Pinto, P.E. (1973), "Method of analysis for cyclically loaded R.C. plane frames including changes in geometry and non-elastic behaviour of elements under combined normal force and bending., Symposium on the Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, International Association for Bridge and Structural Engineering, Zurich, Switzerland, 15-22.
  50. Madas P. (1993), "Advanced modelling of composite frames subjected to earthquake loading., PhD Thesis, Imperial College, University of London, London, UK.
  51. Madas, P. (1993), "Advanced Modelling of Composite Frames Subjected to Earthquake Loading,. PhD Thesis, Imperial College, University of London, London, UK.
  52. Martinez-Rueda, J.E. and Elnashai, A.S. (1997), "Confined concrete model under cyclic load., Mater. Struct., 30(3), 139-147. https://doi.org/10.1007/BF02486385
  53. Nehdi, M., Alam, M.S. and Youssef, M.A. (2011), "Seismic behaviour of repaired superelastic shape memory alloy reinforced concrete beam-column joint., Smart Struct. Syst., 7(5), 329-348. http://dx.doi.org/10.12989/sss.2011.7.5.329.
  54. National Institute of Building Sciences. (2004), Direct physical damage. general building stock, HAZUS-MH Technical manual, chapter5. Federal Emergency Management Agency: Washington, D.C.
  55. Nakashoji, B. and Saiidi, M.S. (2014), "Seismic performance of square nickel-titanium reinforced ecc columns with headed couplers. Reno, NV, USA: Center for Civil Engineering Earthquake Research, University of Nevada.
  56. Nehdi, M., Alam, M.S. and Youssef, M.A. (2010), "Development of corrosion-free concrete beam.column joint with adequate seismic energy dissipation., Eng. Struct., 32(9), 2518-228. http://dx.doi.org/10.1016/j.engstruct.2010.04.020.
  57. NZS 3101, (2006), New Zealand Standard, Part 1.The Design of Concrete Structures. Standards New Zealand, Wellington: New Zealand.
  58. Orakcal, K. and Wallace, J.W. (2006), "Flexural modeling of reinforced concrete walls-experimental verification., ACI Struct. J., 103(2), 196-206.
  59. Porter, K., Kennedy, R. and Bachman, R. (2007), "Creating fragility functions for performance based earthquake engineering., Earthq. Spectra, 23(2), 471-489. https://doi.org/10.1193/1.2720892.
  60. Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Displacement-Based Seismic Design of Structures, IUSS Press: Pavia, Italy, ISBN: 88-6198-000-6.
  61. Paulay, T. and Priestley, M.J.N. (1992), Seismic design of reinforced concrete and masonry buildings. Wiley: Hoboken, NJ.
  62. Panneton, M., Leger, P. and Tremblay, R. (2006), "Inelastic analysis of a reinforced concrete shear wall building according to the National Building Code of Canada 2005., Can. J. Civil Eng., 33, 854-871. https://doi.org/10.1139/l06-026.
  63. Rutenberg, A. and Nsieri, E. (2006), "The seismic shear demand in ductile cantilever wall systems and the EC8 provisions., Bull. Earthq. Eng., 4, 1-21. https://doi.org/10.1007/s10518-005-5407-9
  64. Sadraddin, H.L., Shao, X. and Hu, Y. (2016), "Fragility assessment of high-rise reinforced concrete buildings considering the effects of shear wall contributions., Struct. Des. Tall Spec. Build., DOI: 10.1002/tal.1299.
  65. Song, G., Ma, N. and Li, H.N. (2006), "Applications of shape memory alloys in civil structures., Eng. Struct., 128, 1266-1274. https://doi.org/10.1016/j.engstruct.2005.12.010
  66. Saatcioglu, M., Palermo, D., Ghobarah, A., Mitchell, D., Simpson, R., Adebar, P., et al. (2013), "Performance of reinforced concrete buildings during the 27 February 2010 Maule (Chile) earthquake., Can. J. Civ. Eng., 40(8), 693-710. http://dx.doi.org/10.1139/cjce-2012-0243.
  67. Seismosoft (2018), SeismoStruct: A Computer Program for Static and Dynamic Nonlinear Analysis of Framed Structures, Version 6, http://www.seismosoft.com.
  68. Saiidi, M.S. and Wang, H.Y. (2006), "Exploratory study of seismic response of concrete columns with shape memory alloys reinforcement", ACI Struct. J., 103(3), 436-443.
  69. Saiidi, M.S., O'Brien, M,, Sadrossadat-Zadeh, M. (2009), "Cyclic response of concrete bridge columns using superelastic Nitinol and bendable concrete", ACI Struct. J., 106(1), 69-77.
  70. Tremblay, R., Lacerte, M. and Christopoulos, C. (2008), "Seismic response of multistory buildings with self-centering energy dissipative steel braces", J. Struct. Eng., 134(1), 108-120. http://dx.doi.org/10.1061/(ASCE)0733-9445(2008) 134:1(108).
  71. Vamvatsikos, D. and Cornell, CA. (2002), Seismic performance, capacity and reliability of structures as seen through incremental dynamic analysis. Report No. 151. John A. Blume Earthquake Engineering Research Center, Department of Civil and Environmental Engineering, Stanford University, Stanford, California.
  72. Vamvatsikos, D. and Fragiadakis, M. (2010), "Incremental dynamic analysis for estimating seismic performance sensitivity and uncertainty", Earthq. Eng. Struct. D., 39(2), 141-163. https://doi.org/10.1002/eqe.935.
  73. Wallace, J.W. (2012), "Behavior, design, and modeling of structural walls and coupling beams - Lessons from recent laboratory tests and earthquakes", Int. J. Concr. Struct. Mater., 6(1), 3-18. http://dx.doi.org/10.1007/s40069-012-0001-4.
  74. Youssef, M.A., Alam, M.S. and Nehdi, M. (2008), "Experimental investigation on the seismic behavior of beam-column joints reinforced with superelastic shape memory alloys", J. Earthq. Eng, 12(7), 1205-1222. http://dx.doi.org/10.1080/13632460802003082.
  75. Youssef, M.A. and Elfeki, M.A. (2012), "Seismic performance of concrete frames reinforced with superelastic shape memory alloys", Smart Struct. Syst., 9(4), 313-333. http://dx.doi.org/10.12989/sss.2012.9.4.313

피인용 문헌

  1. Experimental study on component performance in steel plate shear wall with self-centering braces vol.37, pp.3, 2020, https://doi.org/10.12989/scs.2020.37.3.341
  2. Optimum location of second outrigger in RC core walls subjected to NF earthquakes vol.38, pp.6, 2019, https://doi.org/10.12989/scs.2021.38.6.671