Structural Engineering and Mechanics

  • 제71권6호
  • /
  • Pages.643-656
  • /
  • 2019
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Verification of diaphragm seismic design factors for precast concrete parking structures

  • Zhang, Dichuan (School of Engineering and Digital Science, Narzarbayev University) ;
  • Fleischman, Robert (Department of Civil Engineering and Engineering Mechanics, University of Arizona)
  • 투고 : 2018.08.22
  • 심사 : 2019.05.27
  • 발행 : 2019.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

A new seismic design methodology was proposed for precast concrete diaphragms. This methodology adopts seismic design factors applied on top of current diaphragm design forces. These factors are aimed to produce diaphragm design strengths aligned with different seismic performance targets. These factors were established through extensive parametric studies. These studies used a simple evaluation structure with a single-bay rectangular diaphragm. The simple evaluation structure is suitable for establishment of the design factors over comprehensive structural geometry and design parameters. However, the application of the design factors to prototype structures with realistic layouts requires further verification and investigation. This paper presents diaphragm design of several precast concrete parking structures using the new design methodology and verification of the design factor through nonlinear dynamic time history analyses. The seismic behavior and performance of the diaphragm were investigated for the precast concrete parking structures. It was found that the design factor established for the new design methodology is applicable to the realistic precast concrete parking structures.

키워드

과제정보

연구 과제 주관 기관 : National Science Foundation (NSF)

참고문헌

  1. ASCE 7-10. (2010), Minimum Design Loads for Buildings and Other Structures. American Society of Civil Engineers.
  2. ASCE 7-16. (2016), ASCE Minimum Design Loads and Associated Criteria for Buildings and Other Structures. American Society of Civil Engineers, USA.
  3. Building Seismic Safety Council, Committee IT6 (2014), Precast Concrete Diaphragm Design. Proposal IT06-002 - Revise ASCE/SEI 7-10 Sections 14.2.4, NEHRP, USA.
  4. Belleri, A., Torquati, M., Riva, P., and Nascimbene, R. (2015), "Vulnerability assessment and retrofit solutions of precast industrial structures", Earthq. Struct., 8(3), 801-820. http://dx.doi.org/10.12989/eas.2015.8.3.801.
  5. DSDM Project Task Group (2014), Seismic Design Methodology Document for Precast Concrete Diaphragms, Project 08-07 Research Product, Charles Pankow Foundation, Virginia, USA.
  6. Farrow K.T. and Fleischman R.B. (2003), "Effect of Dimension and Detail on the Capacity of Precast Concrete Parking Structure Diaphragms", PCI J., 48(5), 46-61. https://doi.org/10.15554/pcij.09012003.46.61
  7. Fleischman R.B. and Farrow K.T. (2001), "Dynamic Response of Perimeter Lateral-System Structures with Flexible Diaphragms", Earthq. Eng. Struct. Dynam., 30(5), 745-763. https://doi.org/10.1002/eqe.36
  8. Fleischman R.B., Farrow, K.T., Eastman K. (2002), "Seismic Response of Perimeter Lateral-system Structures with Highly Flexible Diaphragms", Earthquake Spectra, 18(2), 251-286. https://doi.org/10.1193/1.1490547.
  9. Fleischman, R.B., Naito C.J., Restrepo J., Sause R., Ghosh S.K., Wan G., Schoettler M., and Cao L. (2005), "Seismic design methodology for precast concrete diaphragms, Part 2: research program", PCI Journal, 51(6), 2-19.
  10. Fleischman R.B., Restrepo J.I, Naito C.J., Sause R., Zhang D. and Schoettler M. (2013), "Integrated Analytical and Experimental Research to Develop a New Seismic Design Methodology for Precast Concrete Diaphragms", Special Issue of the ASCE Journal of Structural Engineering on NEES: Advances in Earthquake Engineering, V139(7).
  11. Fleischman, R.B., Sause, R., Pessiki, S. and Rhodes, A.B. (1998), "Seismic behavior of precast parking structure diaphragms", PCI J., 43(1), 38-53. https://doi.org/10.15554/pcij.01011998.38.53
  12. Fleischman, R.B. and Wan, G. (2007), "Appropriate overstrength of shear reinforcement in precast concrete diaphragms", ASCE J. Struct. Eng., 133(11), 1616-1626. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:11(1616).
  13. Ghosh, S.K., Cleland, N.M., and Naito, C.J. (2017) "Seismic Design of Precast Concrete Diaphragms", NEHRP Seismic Design Technical Brief No. 13.
  14. Iverson, J.K. and Hawkins, N.M. (1994), "Performance of Precast/prestressed Concrete Building Structures during Northridge Earthquake", PCI J., 39(2), 38-55. http://worldcat.org/oclc/12789822. https://doi.org/10.15554/pcij.03011994.38.55
  15. Lee, H.J. and Kuchma, D.A. (2008), "Seismic response of parking structures with precast concrete diaphragms", PCI J., 53(2), 71-94. http://worldcat.org/oclc/12789822. https://doi.org/10.15554/pcij.03012008.71.94
  16. Naito, C. and Ren, R. (2013), "An Evaluation Method for Precast Concrete Diaphragm Connectors Based on Structural Testing", PCI J., 58(2), 106-118. https://doi.org/10.15554/pcij.03012013.106.118
  17. Precast/Prestressed Concrete Institution (2004), PCI Design Handbook: Precast and Prestressed Concrete, Sixth Edition, Chicago, IL, USA.
  18. Ren, R. and Naito, C. (2013), "Precast Concrete Diaphragm Connector Performance Database", ASCE J. Struct. Eng.,, 139(1), 15-27. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000598.
  19. Rodriguez, M., Restrepo, JI. and Carr, A.J. (2002), "Earthquake Induced Floor Horizontal Accelerations in Buildings", Earthq. Eng. Struct. Dynam., 31(3), 693-718. https://doi.org/10.1002/eqe.149.
  20. Schoettler, M.J., Belleri, A., Zhang, D., Restrepo, J. and Fleischman, R.B. (2009), "Preliminary results of the shake-table testing for development of a diaphragm seismic design methodology", PCI J., 54(1), 100-124. https://doi.org/10.15554/pcij.01012009.100.124
  21. Tulebekova S., Zhang, D., Lee, D., Kim, J., Barissov T., and Tsoy V. (2019) "Nonlinear Responses of Energy Storage Pile Foundations with Fiber Reinforced Concrete", Struct. Eng. Mech., 71(4), 363-375. https://doi.org/10.12989/sem.2019.71.4.363.
  22. Wan, G., Fleischman, R.B. and Zhang, D. (2012), "Effect of spandrel beam to double tee connection characteristic of flexure-controlled precast diaphragms", ASCE J. Struct. Eng., 138(2), 247-258. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000426.
  23. Wan, G., Zhang, D., Fleischman, R.B., and Naito, C.J. (2015), "A Coupled Connector Element for Nonlinear Static Pushover Analysis of Precast Concrete Diaphragms", Eng. Struct., 86(1), 58-71. https://doi.org/10.1016/j.engstruct.2014.12.029.
  24. Wood S.L., Stanton J.F. and Hawkins N.M. (2000), "New seismic design provisions for diaphragms in precast concrete parking structures", PCI J., 45(1), 50-65. http://worldcat.org/oclc/12789822.
  25. Zhang, D., and Fleischman, R.B. (2016), "Establishment of performance-based seismic design factors for precast concrete floor diaphragms", Earthq. Eng. Struct. Dynam., 45, 675-698. https://doi.org/10.1002/eqe.2679.
  26. Zhang, D., Fleischman, R.B., Naito, C., and Ren, R. (2011), "Experimental evaluation of pretopped precast diaphragm critical flexure joint under seismic demands", ASCE J. Struct. Eng., 137(10), 1063-1074. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000352.
  27. Zhang, D., Fleischman, R.B., Naito C.J. and Zhang, Z. (2016), "Development of Diaphragm Connector Elements for Three-Dimensional Nonlinear Dynamic Analysis of Precast Concrete Structures", Adv. Struct. Eng., 19(2), 187-202. https://doi.org/10.1177%2F1369433215624319. https://doi.org/10.1177/1369433215624319
  28. Zhang, D., Fleischman, R.B., Schoettler, M.J., Restrepo, J.I. and Mielke, M. (2019), "Precast Diaphragm Response in a Half-Scale Shake Table Test", ASCE J. Struct. Eng., 145(5). https://doi.org/10.1061/(ASCE)ST.1943-541X.0002304.
  29. Zhu H., Wan K.T., Satekenova E., Zhang, D., Leung, C. and Kim, J. (2018), "Development of lightweight strain hardening cementitious composite for structural retrofit and energy efficiency improvement of unreinforced masonry housings", Construct. Build. Mater., 167, 791-812. https://doi.org/10.1016/j.conbuildmat.2018.02.033.
  30. Zhang, D., Kim, J., Tulebekova, S., Saliyev, D. and Lee, D.H. (2018), "Structural responses of reinforced concrete pile foundations subjected to pressures from compressed air for renewable energy storage", J. Concrete Struct. Mater., 12, 74. https://doi.org/10.1186/s40069-018-0294-z.

피인용 문헌

  1. Effects of diaphragm flexibility on the seismic design acceleration of precast concrete diaphragms vol.25, pp.3, 2019, https://doi.org/10.12989/cac.2020.25.3.273
  2. Verification of diaphragm seismic design factors for precast concrete office buildings vol.20, pp.1, 2019, https://doi.org/10.12989/eas.2021.20.1.013
  3. Sensitivity analysis to determine seismic retrofitting column location in reinforced concrete buildings vol.78, pp.1, 2021, https://doi.org/10.12989/sem.2021.78.1.077