Structural Engineering and Mechanics

  • 제71권6호
  • /
  • Pages.627-641
  • /
  • 2019
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Bending analysis of functionally graded plates with arbitrary shapes and boundary conditions

  • Panyatong, Monchai (Department of Civil and Environmental Engineering, Faculty of Engineering, Rajamangala University of Technology Lanna) ;
  • Chinnaboon, Boonme (Department of Civil Engineering, Faculty of Engineering, King Mongkut's University of Technology Thonburi) ;
  • Chucheepsakul, Somchai (Department of Civil Engineering, Faculty of Engineering, King Mongkut's University of Technology Thonburi)
  • 투고 : 2019.01.15
  • 심사 : 2019.04.18
  • 발행 : 2019.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

The paper focuses on bending analysis of the functionally graded (FG) plates with arbitrary shapes and boundary conditions. The material property of FG plates is modelled by using the power law distribution. Based on the first order shear deformation plate theory (FSDT), the governing equations as well as boundary conditions are formulated and obtained by using the principle of virtual work. The coupled Boundary Element-Radial Basis Function (BE-RBF) method is established to solve the complex FG plates. The proposed methodology is developed by applying the concept of the analog equation method (AEM). According to the AEM, the original governing differential equations are replaced by three Poisson equations with fictitious sources under the same boundary conditions. Then, the fictitious sources are established by the application of a technique based on the boundary element method and approximated by using the radial basis functions. The solution of the actual problem is attained from the known integral representations of the potential problem. Therefore, the kernels of the boundary integral equations are conveniently evaluated and readily determined, so that the complex FG plates can be easily computed. The reliability of the proposed method is evaluated by comparing the present results with those from analytical solutions. The effects of the power index, the length to thickness ratio and the modulus ratio on the bending responses are investigated. Finally, many interesting features and results obtained from the analysis of the FG plates with arbitrary shapes and boundary conditions are demonstrated.

키워드

과제정보

연구 과제 주관 기관 : Thailand Research Fund (TRF), King Mongkut's University of Technology Thonburi (KMUTT)

참고문헌

  1. Abad, F. and Rouzegar, J. (2017), "An exact spectral element method for free vibration analysis of FG plate integrated with piezoelectric layers", Compos. Struct., 180, 696-708. https://doi.org/10.1016/j.compstruct.2017.08.030.
  2. Aghazadeh, R., Dag, S. and Cigeroglu, E. (2018), "Modelling of graded rectangular micro-plates with variable length scale parameters", Struct. Eng. Mech., 65(5), 573-585. https://doi.org/10.12989/sem.2018.65.5.573.
  3. Alshorbagy, A.E., Alieldin, S.S., Shaat, M. and Mahmoud, F.F. (2013), "Finite element analysis of the deformation of functionally graded plates under thermomechanical loads", Math. Probl. Eng., 2013. http://dx.doi.org/10.1155/2013/569781.
  4. Amir, S., Ghannadpour, M., and Kiani, P. (2018), "Nonlinear spectral collocation analysis of imperfect functionally graded plates under end-shortening", Struct. Eng. Mech., 66(5), 557-568. https://doi.org/10.12989/sem.2018.66.5.557.
  5. Ardestani, M.M., Soltani, B. and Shams, Sh. (2014), "Analysis of functionally graded stiffened plates based on FSDT utilizing reproducing kernel particle method", Compos. Struct., 112, 231-240. https://doi.org/10.1016/j.compstruct.2014.01.032.
  6. Babouskos, N.G. and Katsikadelis, J.T. (2015), "Optimum design of thin plates via frequency optimization using BEM", Arch. Appl. Mech., 85(9-10), 1175-1190. https://doi.org/10.1007/s00419-014-0962-7.
  7. Bouhadra A., Tounsi, A., Bousahla, A., Benyoucef, S. and Mahmoud, S.R. (2018), "Improved HSDT accounting for effect of thickness stretching in advanced composite plates", Struct. Eng. Mech., 66(1), 61-73. https://doi.org/10.12989/SEM.2018.66.1.061
  8. Chinnaboon, B., Chucheepsakul, S. and Katsikadelis, J.T. (2007a), "A BEM-based meshless method for elastic buckling analysis of plates", Int. J Struct. Stabil. Dynam., 7(1), 81-99. https://doi.org/10.1142/S0219455407002162.
  9. Chinnaboon, B., Chucheepsakul, S. and Katsikadelis, J.T. (2011), "A BEM-based domain meshless method for the analysis of Mindlin plates with general boundary conditions", Comput. Meth. Appl. Mech. Eng., 200(13-16), 1379-1388. https://doi.org/10.1016/j.cma.2010.12.014.
  10. Chinnaboon, B., Katsikadelis, J.T. and Chucheepsakul, S. (2007b), "A BEM-based meshless method for plates on biparametric elastic foundation with internal supports", Comput. Meth. Appl. Mech. Eng., 197(33-34), 3165-3177. https://doi.org/10.1016/j.cma.2007.02.012.
  11. Daouadji, T.H. and Adim, B. (2017), "Mechanical behavior of FGM sandwich plates using a quasi-3D higher order shear and normal deformation theory", Struct. Eng. Mech., 61(1), 49-63. https://doi.org/10.12989/sem.2017.61.1.049.
  12. Efraim, E. and Eisenberger, M. (2007), "Exact vibration analysis of variable thickness thick annular isotropic and FGM plates", J. Sound Vib., 299(4-5), 720-738. https://doi.org/10.1016/j.jsv.2006.06.068.
  13. Fam, G.S.A., Rashed, Y.F. and Katsikadelis, J.T. (2015), "The analog equation integral formulation for plane piezoelectric media", Eng. Anal. Bound. Elem., 51, 199-212. https://doi.org/10.1016/j.enganabound.2014.10.013.
  14. Ferreira, A.J.M., Batra, R.C., Roque, C.M.C., Qian, L.F. and Jorge, R.M.N. (2006), "Natural frequencies of functionally graded plates by a meshless method", Compos. Struct., 75(1-4), 593-600. https://doi.org/10.1016/j.compstruct.2006.04.018.
  15. Hashemi, S.H., Taher, H.R.D., Akhavan, H. and Omidi, M. (2010), "Free vibration of functionally graded rectangular plates using first-order shear deformation plate theory", Appl. Math. Model., 34(5), 1276-1291. https://doi.org/10.1016/j.apm.2009.08.008.
  16. Katsikadelis, J.T. (2002), "The analog boundary integral equation method for nonlinear static and dynamic problem in continuum mechanics", Int. J Theor. Appl. Mech., 40(4), 961-984.
  17. Katsikadelis, J.T. and Babouskos, N.G. (2010), "Post-buckling analysis of viscoelastic plates with fractional derivative models", Eng. Anal. Bound. Elem., 34(12), 1038-1048. https://doi.org/10.1016/j.enganabound.2010.07.003.
  18. Katsikadelis, J.T. and Babouskos, N.G. (2012), "Stiffness and buckling optimization of thin plates with BEM", Arch. Appl. Mech., 82(10-11), 1403-1422. https://doi.org/10.1007/s00419-012-0668-7.
  19. Kitipornchai, S., Yang, J. and Liew, K.M. (2006), "Random vibration of the functionally graded laminates in thermal environments", Comp. Meth. Appl. Mech. Eng., 195(9-12), 1075-1095. https://doi.org/10.1016/j.cma.2005.01.016.
  20. Najafizadeh, M.M. and Heydari H.R. (2004), "Thermal buckling of functionally graded circular plates based on higher order shear deformation plate theory", Eur. J Mech. Solid., 23(6), 1085-1100. https://doi.org/10.1016/j.euromechsol.2004.08.004.
  21. Neves, A.M.A., Ferreira, A.J.M., Carrera, E., Cinefra, M., Roque, C.M.C., Jorge, R.M.N. and Soares, C.M.M. (2012), "A quasi-3D hyperbolic shear deformation theory for the static and free vibration analysis of functionally graded plates", Compos. Struct., 94(5), 1814-1825. https://doi.org/10.1016/j.compstruct.2011.12.005.
  22. Nguyen, T.K., Sab, K. and Bonnet, G. (2008), "First-order shear deformation plate models for functionally graded materials", Compos. Struct., 83, 25-36. https://doi.org/10.1016/j.compstruct.2007.03.004.
  23. Panyatong, M., Chinnaboon, B. and Chucheepsakul, S. (2018), "Nonlinear bending analysis of nonlocal nanoplates with general shapes and boundary conditions by the boundary-only method", Eng. Anal. Bound. Elem., 87, 90-110. https://doi.org/10.1016/j.enganabound.2017.12.003.
  24. Qian, L.F., Batra, R.C. and Chen, L.M. (2004), "Static and dynamic deformations of thick functionally graded elastic plates by using higher-order shear and normal deformable plate theory and meshless local Petrov-Galerkin method", Compos. B Eng., 35(6-8), 685-697. https://doi.org/10.1016/j.compositesb.2004.02.004.
  25. Reddy, J.N. (2000), "Analysis of functionally graded plates", Int. J. Numer. Meth. Eng., 47(1-3), 663-684. https://doi.org/10.1002/(SICI)1097-0207(20000110/30)47:1/3%3C663::AID-NME787%3E3.0.CO;2-8
  26. Reddy, J.N. and Kim, J. (2012), "A nonlinear modified couple stress-based third-order theory of functionally graded plates", Compos. Struct., 94(3), 1128-1143. https://doi.org/10.1016/j.compstruct.2011.10.006.
  27. Roque, C.M.C., Ferreira, A.J.M. and Jorge, R.M.N. (2007), "A radial basis function approach for the free vibration analysis of functionally graded plates using a refined theory", J. Sound Vib., 300(3-5), 1048-1070. https://doi.org/10.1016/j.jsv.2006.08.037.
  28. Shaat, M., Mahmoud, F.F., Alshorbagy, A.E. and Alieldin, S.S. (2013), "Bending analysis of ultra-thin functionally graded Mindlin plates incorporating surface energy effects", Int. J Mech. Sci., 75, 223-232. https://doi.org/10.1016/j.ijmecsci.2013.07.001.
  29. Shen, H.S. (2007), "Thermal postbuckling behavior of shear deformable FGM plates with temperature-dependent properties", Int. J Mech. Sci., 49(4), 466-478. https://doi.org/10.1016/j.ijmecsci.2006.09.011.
  30. Talha, M. and Singh, B.N. (2010), "Static response and free vibration analysis of FGM plates using higher order shear deformation theory", Appl. Math. Model., 34(12), 3991-4011. https://doi.org/10.1016/j.apm.2010.03.034.
  31. Wu, C.P. and Li, H.Y. (2010), "An RMVT-based third-order shear deformation theory of multilayered functionally graded material plates", Compos. Struct., 92(10), 2591-2605. https://doi.org/10.1016/j.compstruct.2010.01.022.
  32. Yang, J., Liew, K.M. and Kitipornchai, S. (2005), "Stochastic analysis of compositionally graded plates with system randomness under static loading", Int J Mech. Sci., 47(10), 1519-1541. https://doi.org/10.1016/j.ijmecsci.2005.06.006.
  33. Yiotis, A.J. and Katsikadelis, J.T. (2013), "Analysis of cylindrical shell panels. A meshless solution", Eng. Anal. Bound. Elem., 37(6), 928-935. https://doi.org/10.1016/j.enganabound.2013.03.005.
  34. Zhang, D.G. and Zhou, Y.H. (2008), "A theoretical analysis of FGM thin plates based on physical neutral surface", Comput. Mater. Sci., 44, 716-720. https://doi.org/10.1016/j.commatsci.2008.05.016.
  35. Zhang, L.W. and Liew, K.M. (2016), "Element-free geometrically nonlinear analysis of quadrilateral functionally graded material plates with internal column supports", Compos. Struct., 147, 99-110. https://doi.org/10.1016/j.compstruct.2016.03.034.