Computers and Concrete

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Comparison among different software for the evaluation of moment-curvature of R.C. columns

  • Received : 2019.02.28
  • Accepted : 2019.07.20
  • Published : 2019.09.25
⟨ Previous Next ⟩

Abstract

The work aims at the comparison among commonly used research programs concerning moment-curvature ($M-{\chi}$) diagrams of confined R.C. members. The software considered in this work are Sap2000, SeismoStruct and Opensees. The curves provided by these software, given the same modelling, have been compared to those provided by a theoretical fiber model. A parametric analysis has been led on rectangular column sections with different level of axial load and different stirrups spacing. The accuracy of the modelling of the considered structural programs has been investigated by comparing their results with those obtained by applying the theoretical fiber model.

Keywords

References

  1. Ahmad, S.M. and Shah, S.P. (1982), "Stress-strain curves of concrete confined by spiral reinforcement", J. Proc., 79(6), 484-490.
  2. Ahmad, S.M. and Shah, S.P. (1985), "Behavior of hoop confined concrete under high strain rates", J. Proc., 82(5), 634-647.
  3. Balmer, G.G. (1944), "Shearing strength of concrete under high triaxial stress-computation of Mohr's envelope as a curve", SP-23, Structural Research, Laboratory, U.S. Bureau of Reclamation.
  4. Barbagallo, F., Bosco, M., Marino, E.M., Rossi, P.P. and Stramondo, P.R. (2016), "Seismic upgrading of vertically irregular existing R.C. frames by BRBs", Geotech. Geolog. Earthq. Eng., 40, 181-192. https://doi.org/10.1007/978-3-319-14246-3_16
  5. Bisby Luke, A., Dent Aaron, J.S. and Green Mark, F. (2005), "Comparison of confinement models for fiber-reinforced polymer-wrapped concrete", ACI Struct. J., 102-S07.
  6. Campione, G. (2012), "Flexural behavior of steel fibrous reinforced concrete deep beams", J. Struct. Eng., 138(2), 235-246. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000442
  7. Campione, G., Cavaleri, L., Di Trapani, F., Macaluso, G. and Scaduto, G. (2016), "Biaxial deformation and ductility domains for engineered rectangular RC cross-sections: A parametric study highlighting the positive roles of axial load, geometry and materials", Eng. Struct., 107, 116-134. https://doi.org/10.1016/j.engstruct.2015.10.030.
  8. Campione, G., Fossetti, M., Giacchino, C. and Minafo, G. (2014), "RC columns externally strengthened with RC jackets", Mater. Struct./Mater. Constr., 47(10), 1715-1728. https://doi.org/10.1617/s11527-013-0146-x.
  9. Campione, G., Fossetti, M., Minafo, G. and Papia, M. (2012), "Influence of steel reinforcements on the behavior of compressed high strength R.C. circular columns", Eng. Struct., 34, 371-382. https://doi.org/10.1016/j.engstruct.2011.10.002.
  10. Cavaleri, L., Di Trapani, F., Ferrotto, M.F. and Davì, L. (2017), "Stress-strain models for normal and high strength confined concrete: Test and comparison of literature models reliability in reproducing experimental results", Ingegneria Sismica, 34, 114-137.
  11. Cavaleri, L., Di Trapani, F., Ferrotto, M.F. and Davì, L. (2017), "Stress-strain models for normal and high strength confined concrete: Test and comparison of literature models reliability in reproducing experimental results", Ingegneria Sismica, 34(3-4), 114-137.
  12. Chang, G.A. and Mander, J.B. (1994), "Seismic energy based fatique damage analysis of bridge columns: Part 1-evaluation of seismic capacity", Technical Report, March.
  13. CSI SAP 2000 (2007), "Integrated finite element analysis and design of structures", Analysis Reference, Computer and Structure Inc., University of California, Berkeley.
  14. Cusson, D. and Paultre, P. (1995), "Stress-strain model for confined high-strength concrete", J. Struct. Eng., 121(3), 468-477. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:3(468)
  15. Cusson, D., De Larrard, F., Boulay, C. and Paultre, P. (1996), "Strain localization in confined high-strength concrete columns", J. Struct. Eng., 122(9), 1055-1061. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:9(1055)
  16. Desayi, P., Iyengar, K.T.S.A. and Reddy, T.S. (1978), "Equations for stress-strain curve of concrete confined in circular steel spiral", Mater. Struct. Res. Test., 11(65), 339-345.
  17. Dhakal, R.P. and Maekawa, K. (2002), "Modeling for postyield buckling of reinforcement", J. Struct. Eng., 128(9), 1139-1147. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:9(1139)
  18. Dilger, W.H., Koch, R. and Kowalczyk, R. (1984), "Ductility of plain and confined concrete under different strain rates", J. Proc., 81(1), 73-81.
  19. Fardis, M.N. and Khalili, H. (1981), "Concrete encased in fibre glass-reinforced plastic", ACI Mater. J., 78(5), 440-446.
  20. Formisano, A. (2012), "Seismic damage assessment of school buildings after 2012 Emilia Romagna earthquake", Ingegneria Sismica, 29(2-3), 72-86.
  21. Karbhari, V.M. and Gao, Y. (1997), "Composite jacketed concrete under uniaxial compression-verification of simple design equations", J. Mater. Civil Eng., ASCE, 9(4), 185-192. https://doi.org/10.1061/(ASCE)0899-1561(1997)9:4(185).
  22. Kent, D.C. and Park, R. (1971), "Flexural members with confined concrete", J. Struct. Div., ASCE, 97(7), 1969-1990. https://doi.org/10.1061/JSDEAG.0002957
  23. Li, L.J., Zeng, L., Xu, S.D. and Guo, Y.C. (2017), "Experimental study on axial compressive behavior of hybrid FRP confined concrete columns", Comput. Concrete, 19(4), 395-404. https://doi.org/10.12989/cac.2017.19.4.395.
  24. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., ASCE, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
  25. Matthys, S., Toutanji, H., Audenaert, K. and Taerwe, L. (2005), "Axial load behavior of largescale columns confined with fiber-reinforced polymer composites", ACI Struct. J., 102(2), 258-265.
  26. Mazzoni, S., McKenna, F., Scott, M.H. and Fenves, G.L. (2007), "OpenSees command language manual", Pacific Earthquake Engineering Research Center, University of California, Berkeley, U.S.A.
  27. Miyauchi, K., Inoue, S., Kuroda, T. and Kobayashi, A. (1999), "Strengthening effects of concrete columns with carbon fiber sheet", Tran. JPN Concrete Inst., 21, 143-150.
  28. Montuori, R. and Piluso, V. (2009), "Reinforced concrete columns strengthened with angles and battens subjected to eccentric load", Eng. Struct., 31, 539-550. https://doi.org/10.1016/j.engstruct.2008.10.005.
  29. Montuori, R. and Piluso, V. (2015), "Analysis and modelling of CFT members: Moment curvature analysis", Thin Wall. Struct., 86, 157-166. https://doi.org/10.1016/j.tws.2014.10.010.
  30. Montuori, R., Piluso, V. and Tisi, A. (2012a), "Comparative analysis and critical issues of the main constitutive laws for concrete elements confined with FRP", Compos. Part B, 43, 3219-3230. https://doi.org/10.1016/j.compositesb.2012.04.001.
  31. Montuori, R., Piluso, V. and Tisi, A. (2012b), "Ultimate behaviour of FRP wrapped sections under axial force and bending: Influence of stress-strain confinement model", Compos. Part B: Eng., 54(1), 85-96. https://doi.org/10.1016/j.compositesb.2013.04.059.
  32. Motezaker, M. and Kolahchi, R. (2017), "Seismic response of concrete columns with nanofiber reinforced polymer layer", Comput. Concrete, 20(3), 361-368. https://doi.org/10.12989/cac.2017.20.3.361.
  33. Nastri, E., Vergato, M. and Latour, M. (2017), "Performance evaluation of a seismic retrofitted R.C. precast industrial building", Earthq. Struct., 12(1), 13-21. https://doi.org/10.12989/eas.2017.12.1.013.
  34. Park, R. and Leslie, P.D. (1977), "Curvature ductility of circular reinforced concrete columns confined by the ACI spiral", 6th Australasian Conf. on the Mech. of Struct, and Mater., 1, 342-349.
  35. Park, R., Priestley, M.J.N. and Gill, W.D. (1982), "Ductility of square-confined concrete columns", J. Struct. Div., ASCE, 108(4), 929-950. https://doi.org/10.1061/JSDEAG.0005933
  36. Popovics, S. (1973), "A numerical approach to the complete stress-strain curves for concrete", Cement Concrete Res., 3(5), 583-599. https://doi.org/10.1016/0008-8846(73)90096-3.
  37. Razvi, S. and Saatcioglu, M. (1999), "Confinement model for high-strength concrete", J. Struct. Eng., 125(3), 281-289. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:3(281).
  38. Richart, F.E., Bradtzaeg, A. and Brown, R.L. (1928), "A study of the failure of concrete under combined compressive stresses", Bulletin No. 185, Engineering experimental station University of Illinois, Urbana, USA.
  39. Richart, F.E., Brandtzaeg, A. and Brown, R.L. (1929), "The failure of plain and spirally reinforced concrete in compression", Bulletin 190, Univ. of Illinois Engineering Experimental Station, Champaign, 111.
  40. Roy, H.E.H. and Sozen, M.A. (1964), "Ductility of concrete", Proc. Int. Symp. on the Flexural Mech. of Reinforced Concrete, ASCE-American Concrete Institute, 213-224.
  41. Saafi, M., Toutanji, H.A. and Li, Z. (1999), "Behavior of concrete columns confined with fiber reinforced polymer tubes", ACI Mater. J., 96(4), 500-509.
  42. Scott, B.D., Park, R. and Priestley, M.J.N. (1982), "Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates", J. Proc., 79(1), 13-27.
  43. SeismoStruct (2016), avaliable on http://www.seismosoft.com/SeismoStruct_2016_Release-5_ITA
  44. Shahbeyk, S., Moghaddam, M.Z. and Safarnejad, M. (2017), "A physically consistent stress-strain model for actively confined concrete", Comput. Concrete, 20(1), 85-97. https://doi.org/10.12989/cac.2017.20.1.085.
  45. Sheikh, S.A. and Uzumeri, S.M. (1980), "Strength and ductility of tied concrete columns", J. Struct. Div., ASCE, 106(5), 1079-1102. https://doi.org/10.1061/JSDEAG.0005416
  46. Sheikh, S.A. and Uzumeri, S.M. (1982), "Analytical Model for concrete confinement in tied columns", J. Struct. Div., ASCE, 108, 2703-2722. https://doi.org/10.1061/JSDEAG.0006100
  47. Silva, M.F.A. and Haach, V.G. (2016), "Parametrical study of the behavior of exterior unreinforced concrete beam-column joints through numerical modeling", Comput. Concrete, 18(2), 215-233. https://doi.org/10.12989/cac.2016.18.2.215.
  48. Simao, P.D., Barros, H., Ferreira, C.C. and Marques, T. (2016), "Closed-form moment-curvature relations for reinforced concrete cross-sections under bending moment and axial force", Eng. Struct., 129, 67-80. https://doi.org/10.1016/j.engstruct.2016.09.033.
  49. Spoelstra, M.R. and Monti, G. (1999), "FRP-confined concrete model", J. Compos. Constr, ASCE, 3(3), 143-150. https://doi.org/10.1061/(ASCE)1090-0268(1999)3:3(143).
  50. Toutanji, H.A. (1999), "Stress-strain characteristics of concrete columns externally confined with advanced fiber composite sheets", ACI Mater. J., 96(3), 397-405.
  51. UNI EN 1998-1 (2013), Eurocode 8-Design of Structures for Earthquake Resistance-Part 1: General Rules, Seismic Actions and Rules For Buildings.
  52. Vellenas, J., Bertero, V.V. and Popov, E.P. (1977), "Concrete confined by rectangular hoops subjected to axial loads", Report 77/13, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
  53. Xiao, Y. and Wu, H. (2000), "Compressive behavior of concrete confined by carbon fiber composite jackets", J. Mater. Civil Eng., ASCE, 12(2), 139-146. https://doi.org/10.1061/(ASCE)0899-1561(2000)12:2(139).

Cited by

  1. Elasto-Damage constitutive modelling of recycled aggregate concrete vol.28, pp.1, 2019, https://doi.org/10.12989/cac.2021.28.1.013