References
- J. Pan, Y. Zou, and G. Cao, “Investigation of a low-power, double-sided switched reluctance generator for wave energy conversion,” IET Renew. Power Gener., Vol. 7, No. 2, pp. 98-109, May 2013. https://doi.org/10.1049/iet-rpg.2011.0274
- D. Wang, X. Du, D. Zhang, and X. Wang, “Design, optimization, and prototyping of segmental-type linear switched-reluctance motor with a toroidally wound mover for vertical propulsion application,” IEEE Trans. Ind. Electron., Vol. 65, No. 2, pp. 1865-1874, Feb. 2018. https://doi.org/10.1109/TIE.2017.2740824
-
L, Qiu, Y. Shi, J. Pan, and G. Xu, "Networked
$H{\infty}$ controller design for a direct-drive linear motion control system," IEEE Trans. Ind. Electron., Vol. 63, No. 10, pp. 6281-6291, Oct. 2016. https://doi.org/10.1109/TIE.2016.2571263 - J. Amoros, P. Andrada, B. Blanque, and M. Marin-Genesca, “Influence of design parameters in the optimization of linear switched reluctance motor under thermal constraints,” IEEE Trans. Ind. Electron., Vol. 65, No. 2, pp. 1875-1883, Feb. 2018. https://doi.org/10.1109/TIE.2017.2686361
- P. Acarnley, R. Hill, and C. Hooper, “Detection of rotor position in stepping and switched motors by monitoring of current waveforms,” IEEE Trans. Ind. Electron., Vol. 32, No. 3, pp. 215-222, Aug. 1985.
- H. Yang, J. Kim, and R. Krishnan, “Low-cost position sensorless switched reluctance motor drive using a single-controllable switch converter,” J. Power Electron., Vol. 12, No. 1, pp. 75-82, Jan. 2012. https://doi.org/10.6113/JPE.2012.12.1.75
- S. Kuai, X. F. Li, X. H. Li, and J. Ma, “Variable coefficient inductance model-based four-quadrant sensorless control of SRM,” J. Power Electron., Vol. 14, No. 6, pp. 1243-1253, Nov. 2014. https://doi.org/10.6113/JPE.2014.14.6.1243
- J. Cai and Z. Deng, “A position sensorless control of switched reluctance motors based on phase inductance slope,” J. Power Electron., Vol. 13, No. 2, pp. 264-274, Mar. 2013. https://doi.org/10.6113/JPE.2013.13.2.264
- H. Gao, F. Salmasi, and M. Ehsani, “Inductance modelbased sensorless control of the switched reluctance motor drive at low speed,” IEEE Trans. Power Electron., Vol. 19, No. 6, pp. 1568-1573, Nov. 2004. https://doi.org/10.1109/TPEL.2004.836632
- I. H. AI-Bahadly, “Examination of a sensorless rotorposition-measurement method for switched reluctance drive,” IEEE Trans. Ind. Electron., Vol. 55, No. 1, pp. 288-295, Jan. 2008. https://doi.org/10.1109/TIE.2007.909055
- S. Zhao, N.C. Cheung, W. Gan, and J. Yang, “Position estimation and error analysis in linear switched reluctance motors,” IEEE Trans. Instrum. Meas., Vol. 58, No. 8, pp. 2815-2823, Aug. 2009. https://doi.org/10.1109/TIM.2009.2016363
- Q. Wang, H. Chen, T. Xu, J. Yuan, J. Wang, and S. Abbas, "Position estimation of linear switched reluctance machine with iron losses based on eddy-current effect," IET Electric Power Appl., Vol. 10. No. 8, pp. 772-778, Sep. 2016. https://doi.org/10.1049/iet-epa.2016.0055
- Q. Wang, H. Chen, T. Xu, R. Nie, J. Wang, and S. Abbas, "Influence of mover yoke and winding connections on unbalanced normal force for double-sided linear switched reluctance machine," IET Electric Power Appl., Vol. 10. No. 2, pp. 91-100, Feb. 2016. https://doi.org/10.1049/iet-epa.2015.0214
- Q. Wang, H. Chen, T. Xu, Y. Yuan, J. Wang, and S. Abbas, "Inductance estimation method for linear switched reluctance machines considering iron losses," IET Electric Power Appl., Vol. 10. No. 3, pp. 181-188, Mar. 2016. https://doi.org/10.1049/iet-epa.2015.0318
- Q. Wang, H. Chen, and R. Nie, "Unbalanced normal force reduction in the eccentric double-sided linear switched reluctance machine," IET Electric Power Appl., Vol. 10. No. 5, pp. 384-393, Jun. 2016. https://doi.org/10.1049/iet-epa.2015.0419