DOI QR코드

DOI QR Code

Capacitors Energy Strategy Based Cascaded H-Bridge Converter for DC Port Failures

  • Peng, Xu (Aviation Engineering Institute, Civil Aviation Flight University of China) ;
  • Liu, Xiaohan (Aviation Engineering Institute, Civil Aviation Flight University of China) ;
  • Yang, Guolong (Aviation Engineering Institute, Civil Aviation Flight University of China) ;
  • Liu, Xijun (Aviation Engineering Institute, Civil Aviation Flight University of China) ;
  • Gao, Lixia (Aviation Engineering Institute, Civil Aviation Flight University of China) ;
  • Zhu, Xinyu (Aviation Engineering Institute, Civil Aviation Flight University of China)
  • Received : 2019.01.22
  • Accepted : 2019.04.30
  • Published : 2019.09.20

Abstract

In this paper, a capacitors energy strategy based Cascaded H-bridge Converter (CHBC) for steady DC link voltage is proposed, which allow the CHBC to work while DC power fails. The topology of the CHBC is analyzed to construct the proposed strategy. The capacitors energy strategy is deduced based on the principle that the DC link voltage should be steady, the switch state should be smooth and the switch frequency should be normal. Experiments based on a three-module prototype, including static experiment, start experiment and step change experiment, proves the correctness of the strategy. They also verified the excellent fault tolerance ability and good dynamic performance of the proposed strategy.

Keywords

References

  1. X. Peng, X. He, P. Han, H. Lin, S. Gao, and Z. Shu, "Opposite vector based phase shift carrier space vector pulse width modulation for extending the voltage balance region in single-phase 3LNPC cascaded rectifier," IEEE Trans. Power Electron, Vol. 32, NO. 9, pp. 7381-7393, Sep. 2017. https://doi.org/10.1109/TPEL.2016.2611607
  2. X. She, A. Q. Huang, and X. J. Xu, “Current sensorless power balance strategy for DC/DC converters in a cascaded multilevel converter based solid state transformer,” IEEE Trans. Power Electron, Vol. 29, No. 1, pp. 17-22, Jan. 2014. https://doi.org/10.1109/TPEL.2013.2256149
  3. H. W. Sim, J. S. Lee, and K. B. Lee, “Detecting open-switch faults: Using asymmetric zero-voltage switching states,” IEEE Ind. Appl. Mag., Vol. 22, No. 2, pp. 27-37, Mar./Apr. 2016. https://doi.org/10.1109/MIAS.2015.2459096
  4. X. Peng, X. He, P. Han, A. Guo, Z. Shu, and S. Gao, "Smooth switching technique for voltage balance management based on three-level neutral point clamped cascaded rectifier," Energies, Vol. 9, No. 10, Oct. 2016
  5. B. Gou, X. Ge, S. Wang, X. Feng, J. B. Kuo, and T. G. Habetler, “An open-switch fault diagnosis method for single-phase PWM rectifier using a model-based approach in high-speed railway electrical traction drive system,” IEEE Trans. Power Electron, Vol. 31, No. 5, pp. 3816-3826, May. 2016. https://doi.org/10.1109/TPEL.2015.2465299
  6. D. Dujic, Z. Chuanhong, A. Mester, J. K. Steinke, M. Weiss, S. Lewdeni-Schmid, T. Chaudhuri, and P. Stefanutti, “Power electronic traction transformer-low voltage prototype,” IEEE Trans. Power Electron, Vol. 28, No. 12, pp. 5522-5534, Dec. 2013. https://doi.org/10.1109/TPEL.2013.2248756
  7. S. Yang, D. Xiang, A. Bryant, P. Mawby, L. Ran, and P. Tavner, "Condition monitoring for device reliability in power electronic converters: A review," IEEE Trans. Power Electron, Vol.25, No. 11, pp. 2734-2752, Nov. 2010. https://doi.org/10.1109/TPEL.2010.2049377
  8. S. Yang, A. Bryant, P. Mawby, D. Xiang, L. Ran, and P. Tavner, "An industry-based survey of reliability in power electronic converters," IEEE Energy Conversion Congress and Exposition, 2009.
  9. P. Han, X. He, H. Ren, Y. Wang, X. Peng, Z. Shu, S., Y. Wang, and Z. Chen. "Fault diagnosis and system reconfiguration strategy of single phase three level neutral point clamped cascaded inverter," IEEE Trans. Ind. Appl., Vol. 55, No. 4, pp. 3863-3876, Jul./Aug. 2019. https://doi.org/10.1109/tia.2019.2901359
  10. J. H. Choi, S. Kim, D. S. Yoo, and K. H. Kim, “A diagnostic method of simultaneous open-switch faults in inverter-fed linear induction motor drive for reliability enhancement,” IEEE Trans. Ind. Electron., Vol. 62, No. 7, pp. 4065-4077, Jul. 2015. https://doi.org/10.1109/TIE.2014.2385044
  11. X. Ge, J. Pu, B. Guo, and Y. Liu, “An open-circuit fault diagnosis approach for single-phase three-level neutralpoint- clamped converters,” IEEE Trans. Power Electron, Vol. 33, No. 3, pp. 2559-2570, Mar. 2018. https://doi.org/10.1109/TPEL.2017.2691804
  12. J. Lamb and B. Mirafzal, “Open-circuit IGBT fault detection and location isolation for cascaded multilevel converters,” IEEE Trans. Ind. Electron, Vol. 64, No. 6, pp. 4846-4856, Jun. 2017. https://doi.org/10.1109/TIE.2017.2674629
  13. S. P. Gautam, L. Kuma, S. Gupta, and N. Agrawal, “A single-phase five-level inverter topology with switch faulttolerance capabilities,” IEEE Trans. Ind. Electron, Vol. 64, No. 3, pp. 2004-2014, Mar. 2017. https://doi.org/10.1109/TIE.2016.2626368
  14. U. M. Choi, K.B. Lee, and F. Blaabjerg, “Diagnosis and tolerant strategy of an open-switch fault for t-type threelevel inverter systems,” IEEE Trans. Ind. Appl, Vol. 50, No. 1, pp. 495-508, Jan./Feb. 2014. https://doi.org/10.1109/TIA.2013.2269531
  15. N. A. Joan, B. M Sergio, J. Boardonau, S. Alepuz, and C. P. Alejandro, “Analysis of the Fault-Tolerance Capacity of the Multilevel Active-Clamped Converter,” IEEE Trans. Ind. Electron, Vol. 60, No. 11, pp. 4773-4783, Nov. 2013. https://doi.org/10.1109/TIE.2012.2222856
  16. A. Chen, L. Hu, L. Chen, Y. Deng, G. Yao, and X. He, "A multilevel converter topology with fault-tolerant ability," IEEE Applied Power Electronics Conference and Exposition, 2004.
  17. S. Zeliang, H. Xiaoqiong, W. Zhiyong, Q. Daqiang, and J. Yongzi, “Voltage balancing approaches for diode-clamped multilevel converters using auxiliary capacitor-based circuits,” IEEE Trans. Power Electron., Vol. 28, No. 5, pp. 2111-2124, May 2013. https://doi.org/10.1109/TPEL.2012.2215966
  18. S. Zeliang, Z. Haifeng, H. Xiaoqiong, D. Na, and J. Yongzi, “One-inductor-based auxiliary circuit for dc-link capacitor voltage equalisation of diode-clamped multilevel converter,” IET Power Electron., Vol. 6, No. 7, pp. 1339-1349, Aug. 2013. https://doi.org/10.1049/iet-pel.2012.0242
  19. Z Haifeng, S Zeliang, G Fenghua, Q Bin, and G Shibin, “Five-level diode-clamped active power filter using voltage space vector-based indirect current and predictive harmonic control,” IET Power Electron., Vol. 7, No. 3, pp. 713-723, Mar. 2014. https://doi.org/10.1049/iet-pel.2013.0075
  20. A. Dell'Aquila, M. Liserre, V. G. Monopoli, and P. Rotondo, “Overview of PI-based solutions for the control of DC buses of a single-phase H-bridge multilevel active rectifier,” IEEE Trans. Ind. Appl, Vol. 44, No. 3, pp. 857-866, May/Jun. 2008. https://doi.org/10.1109/TIA.2008.921405
  21. M. Moosavi, G. Farivar, H. Iman-Eini, and S.M. Shekarabi, “A voltage balancing strategy with extended operating region for cascaded H-bridge converters,” IEEE Trans. Power Electron., Vol. 29, No. 9, pp. 5044-5053, Sep. 2014. https://doi.org/10.1109/TPEL.2013.2286270
  22. X. She, A. Q. Huang, and G. Wang, “3-D space modulation with voltage balancing capability for a cascaded sevenlevel converter in a solid-state transformer,” IEEE Trans. Power Electron, Vol. 26, No. 12, pp. 3778-3789, Dec. 2011. https://doi.org/10.1109/TPEL.2011.2142422
  23. X. Peng, X. He, P. Han, X. Lin, Z. Shu, and S. Gao, “Sequence pulse modulation for voltage balance in a cascaded H-bridge rectifier,” J. Power Electron., Vol. 17, No. 13, pp. 664-673, Mar. 2017. https://doi.org/10.6113/JPE.2017.17.3.664
  24. H. Lin, Z. Shu, X. He, and M. Liu, “N-D SVPWM with DC voltage balancing and vector smooth transition algorithm for cascaded multilevel converter,” IEEE Trans. Ind. Electron, Vol. 64, No. 5, pp. 3837-3847, May 2018.
  25. P. Han, X. He, Z. Zhao, H. Yu, Y. Wang, and Z. Shu, “DC-link capacitor voltage balanced modulation strategy based on three level neutral point clamped cascaded rectifier,” J. Power Electron., Vol. 19, No. 1, pp. 99-107, Jan. 2019. https://doi.org/10.6113/JPE.2019.19.1.99