DOI QR코드

DOI QR Code

Investigations of elastic vibration periods of tall reinforced concrete office buildings

  • Al-Balhawi, Ali (School of Computing, Engineering and Built Environment, Glasgow Caledonian University) ;
  • Zhang, Binsheng (School of Computing, Engineering and Built Environment, Glasgow Caledonian University)
  • 투고 : 2018.03.06
  • 심사 : 2019.06.04
  • 발행 : 2019.09.25

초록

The assessment of wind-induced vibration for tall reinforced concrete (RC) buildings requires the accurate estimation of their dynamic properties, e.g., the fundamental vibration periods and damping ratios. In this study, RC frame-shear wall systems designed under gravity and wind loadings have been evaluated by utilising 3D FE modelling incorporating eigen-analysis to obtain the elastic periods of vibration. The conducted parameters consist of the number of storeys, the plan aspect ratio (AR) of buildings, the core dimensions, the space efficiency (SE), and the leasing depth (LD) between the internal central core and outer frames. This analysis provides a reliable basis for further investigating the effects of these parameters and establishing new formulas for predicting the fundamental vibration periods by using regression analyses on the obtained results. The proposed constrained numerically based formula for vibration periods of tall RC frame-shear wall office buildings in terms of the height of buildings reasonably agrees with some cited formulas for vibration period from design codes and standards. However, the same proposed formula has a high discrepancy with other cited formulas from the rest of design codes and standards. Also, the proposed formula agrees well with some cited experimentally based formulas.

키워드

과제정보

연구 과제 주관 기관 : Higher Committee for Education Development in Iraq (HCED)

참고문헌

  1. Al-Balhawi, A. (2018), Dynamic Responses of Tall Reinforced Concrete Buildings subjected to Wind Loading, PhD Thesis, Glasgow Caledonian University, Glasgow, Scotland, UK.
  2. Al-Balhawi, A. and Zhang, B. (2017), "Investigations of elastic vibration periods of reinforced concrete moment-resisting frame systems with various infill walls", Eng. Struct., 151, 173-187. https://doi.org/10.1016/j.engstruct.2017.08.016.
  3. American Society of Civil Engineers (ASCE) (2010), ASCE 7 Minimum Design Loads for Buildings and other Structures, Reston, Virginia, USA.
  4. Architectural Institution of Japan (AIJ) (2000), Damping in Buildings, Tokyo, Japan.
  5. Australian/New Zealand Standard (AS/NZS) (2011), AS/NZS 1170.2 Structural Design Actions - Part 2: Wind Actions, Australia/New Zealand.
  6. Balendra, T., Ma, Z. and Tan, C.L. (2003), "Design of tall residential buildings in Singapore for wind effects", Wind Struct., 6(3), 221-248. DOI: http://dx.doi.org/10.12989/was.2003.6.3.221.
  7. Balkaya, C. and Kalkan, E. (2003), "Estimation of fundamental periods of shear-wall dominant building structures", Earthq. Eng. Struct. D., 32(7), 985-998. https://doi.org/10.1002/eqe.258.
  8. British Standards Institution (BSI) (2002), BS EN 1991-1-1 Eurocode 1: Actions on Structures - Part 1-1: General Actions - Densities, Self-weight, Imposed Loads for Buildings, London, UK.
  9. British Standards Institution (BSI) (2004a), BS EN 1992-1-1 Eurocode 2: Design of Concrete Structures - Part 1-1: General Rules and Rules for Buildings, London, UK.
  10. British Standards Institution (BSI) (2004b), BS EN 1992-1-2 Eurocode 2: Design of Concrete Structures - Part 1-2: General Rules - Structural Fire Design, London, UK.
  11. British Standards Institution (BSI) (2005a), BS EN 1990 + A1 Eurocode - Basis of Structural Design, London, UK.
  12. British Standards Institution (BSI) (2005b), BS EN 1991-1-4 Eurocode 1: Actions on Structures - Part 1-4: General Actions - Wind Actions, London, UK.
  13. Brownjohn, J.M.W., Pan, T.C. and Deng, X.Y. (2000), "Correlating dynamic characteristics from field measurements and numerical analysis of a high-rise building", Earthq. Eng. Struct. D., 29(4), 523-543. https://doi.org/10.1002/(SICI)1096-9845(200004)29:4<523::AID-EQE920>3.0.CO;2-L.
  14. Chopra, A.K. and Goel, R.K. (2000), "Building period formulas for estimating seismic displacements", Earthq. Spectra, 16(2), 533-536. https://doi.org/10.1193/1.1586125.
  15. Computer and Structures Inc. (CSI) (2003), CSiCOL V.9, Design of Simple and Complex Reinforced Concrete Columns, Berkeley, California, USA.
  16. Computer and Structures Inc. (CSI) (2016), SAP 2000, Ultimate 18.1.1 Structural Analysis Program - Manual, Berkeley, California, USA.
  17. Ellis, B.R. (1980), "An assessment of the accuracy of predicting the fundamental natural frequencies of buildings and the implications concerning the dynamic analysis of structures", Proc. Inst. Civ Eng, 69(3), 763-776. https://doi.org/10.1680/iicep.1980.2376.
  18. Gilles, D. and McClure, G. (2012), "In situ dynamic characteristics of reinforced concrete shear wall buildings", Structures Congress, ASCE, Chicago, Illinois, USA, March.
  19. Goel, R.K. and Chopra, A.K. (1998), "Period formulas for concrete shear wall buildings", J. Struct. Eng., 124(4), 426-433. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:4(426).
  20. Jalali, A. and Milani, A.S. (2005), "Fundamental periods of buildings measured from ambient vibration measurements", Proceedings of the 2005 World Sustain. Build. Conf., Tokyo, Japan, September, 2577-2584.
  21. Jayachandran, P. (2009), "Design of tall buildings: Preliminary design and optimization", National Workshop on High-rise and Tall Buildings, University of Hyderabad, India.
  22. Ju, S.H. and Lin, M.C. (1999), "Comparison of building analyses assuming rigid or flexible floors", J. Struct. Eng., 125(1), 25-31. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:2(272).
  23. Kim, J.Y., Yu, E., Kim, D.Y. and Kim S.D. (2009), "Calibration of analytical models to assess wind-induced acceleration responses of tall buildings in serviceability level", Eng. Struct., 31(9), 2086-2096. https://doi.org/10.1016/j.engstruct.2009.03.010.
  24. Kwon, O.S. and Kim, E.S. (2010), "Evaluation of building period formulas for seismic design", Earthq. Eng. Struct. D., 39(14), 1569-1583. https://doi.org/10.1002/eqe.998.
  25. Lagomarsino, S. (1993), "Forecast models for damping and vibration periods of buildings", J. Wind Eng. Ind. Aerod., 48(2-3), 221-239. https://doi.org/10.1016/0167-6105(93)90138-E.
  26. Lee, D.G., Kim, H.S. and Chun, M.H. (2002), "Efficient seismic analysis of high-rise building structures with the effects of floor slabs", Eng. Struct., 24(5), 613-623. https://doi.org/10.1016/S0141-0296(01)00126-2.
  27. Lee, L.H., Chang, K.K. and Chun, Y.S. (2000), "Experimental formula for the fundamental period of RC buildings with shearwall dominant systems", Struct. Des. Tall Build., 9(4), 295-307. https://doi.org/10.1002/1099-1794(200009)9:4<295::AIDTAL153>3.0.CO;2-9.
  28. Li, Q. and Yi, J. (2016), "Monitoring of dynamic behaviour of super-tall buildings during typhoons", Struct. Infrastruct. Eng., 12(3), 289-311. https://doi.org/10.1080/15732479.2015.1010223.
  29. Michel, C., Gueguen, P., Lestuzzi, P. and Bard, P.Y. (2010), "Comparison between seismic vulnerability models and experimental dynamic properties of existing buildings in France", Bull. Earthq. Eng., 8(6), 1295-1307. https://doi.org/10.1007/s10518-010-9185-7
  30. Pacific Earthquake Engineering Research Centre and Applied Technology Council (PEER/ATC) (2010), PEER/ATC 72-1 Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings, Redwood, California, USA.
  31. Pan, T.-C., Goh, K.S. and Megawati, K. (2014), "Empirical relationships between natural vibration period and height of buildings in Singapore", Earthq. Eng. Struct. D., 43(3), 449-465. https://doi.org/10.1002/eqe.2356.
  32. Panzera, F., Lombardo, G. and Muzzetta, I. (2013), "Evaluation of building dynamic properties through in situ experimental and 1D modelling: The example of Catania, Italy", Phys. Chem. Earth, 63, 136-146. https://doi.org/10.1016/j.pce.2013.04.008.
  33. Poovarodom, N., Warnitchai, P., Petcharoen, C., Yinghan, P. and Jantasod, M. (2004), "Dynamic characteristics of nonseismically designed reinforced concrete buildings with soft soil condition in Bangkok", Proceedings of the 13th World Conf. Earthq. Eng., Vancouver, B.C., Canada.
  34. Sasaki, A., Satake, N., Arakawa, T., Suda, K., Ono, J. and Morita, K. (1997), "Damping properties of buildings using full-scale data", Proceedings of the Symp. Damping Technol. 21st Century, Dyn. Des. Conf., The Japan Society of Mechanical Engineers Centennial Grand Congress.
  35. Satake, N., Suda, K., Arakawa, T., Sasaki, A. and Tamura, Y. (2003), "Damping evaluation using full-scale data of buildings in Japan", J. Struct. Eng., 129(4), 470-477. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:4(470).
  36. Sev, A. and O zgen, A. (2009), "Space efficiency in high-rise office buildings", METU J. Fac. Archit., 26(2), 69-89. https://doi.org/10.4305/METU.JFA.2009.2.4
  37. Shan, J., Shi, W. and Wang, J. (2013), "Regional study on structural dynamic property of buildings in China", Earthq. Eng. Struct. D., 42(7), 1013-1029. https://doi.org/10.1002/eqe.2256.
  38. Stafford Smith, B. and Coull, A. (1991), Tall Building Structures: Analysis and Design, John Wiley & Sons Inc., Canada.
  39. Su, R.K.L., Chandler, A.M., Sheikh, M.N. and Lam, N.T.K. (2005), "Influence of non-structural components on lateral stiffness of tall buildings", Struct. Des. Tall Spec. Build., 14(2), 143-164. https://doi.org/10.1002/tal.266.
  40. Su, R.K.L., To, A., Chandler, A.M., Lee, P.K.K. and Li, J.H. (2003), "Dynamic testing and modelling of existing buildings in Hong Kong", Trans Hong Kong Inst. Eng, 10(2), 17-25. https://doi.org/10.1080/1023697X.2003.10667905.
  41. Suda, K., Satake, N., Ono, J. and Sasaki, A. (1996), "Damping properties of buildings in Japan", J. Wind Eng. Ind. Aerod., 59(2), 383-392. https://doi.org/10.1016/0167-6105(96)00018-9
  42. Tamura, Y., Suda, K. and Sasaki, A. (2000), "Damping in buildings for wind resistant design", Proceedings of the Int. Symp. Wind Struct. 21st Century, Cheju, Korea, 115-130.
  43. Taranath, B.S. (2009), Reinforced Concrete Design of Tall Buildings, CRC Press, Boca Raton, Florida, USA.
  44. The MathWorks Inc. (MWI) (2017), MATLAB and Statistics Toolbox Release 2017a, Natick, Massachusetts, USA.
  45. Velani, P.D. and Kumar, R.P. (2016), "Proposed new empirical expression for natural period of RC tall buildings in India", Int. J. Eng. Technol., 5 (20), 76-83.
  46. Vuran, E., Bal, I.E., Crowley, H. and Pinho, R. (2008), "Determination of equivalent SDOF characteristics of 3D dual RC structures", Proceeding of the 14th World Conf. Earthq. Eng., Beijing, China.
  47. Yoon, S.W. and Ju, Y.K. (2004), "Dynamic properties of tall buildings in Korea", Counc. Tall Build. Urban Habitat, Seoul, Korea, 524-530.
  48. Yoshida, A. and Tamura, Y. (2015), "Field measurement and modal identification of various structures for structural health monitoring", Int. J. High-Rise Build., 4(1), 9-25. https://doi.org/10.21022/IJHRB.2015.4.1.009.
  49. Zekioglu, A., Willford, M., Jin, L. and Melek, M. (2007), "Case study using the Los Angeles tall buildings structural design council guidelines: 40-storey concrete core wall building", Struct. Des. Tall Spec. Build., 16(5), 583-597. https://doi.org/10.1002/tal.434.

피인용 문헌

  1. Analytical model for the basement wall horizontally supported by flexible floor diaphragms vol.79, pp.5, 2019, https://doi.org/10.12989/sem.2021.79.5.601