DOI QR코드

DOI QR Code

Structural Performance of Beam-to-Column Joint Types in Dapo-style Buildings of the Joseon Dynasty

조선시대 다포계 건축물의 결구형태별 구조성능 평가

  • Received : 2018.10.25
  • Accepted : 2018.11.09
  • Published : 2019.07.01

Abstract

In Korean traditional wooden architecture, joint performance varies with the material characteristics of timber, the form of joint, the precision of timber-trimming and the like. Case studies prove that the beam-to-column joint type has large influence on the degrees of deformation and spacing. This is not only true of single-story buildings, but also of large-scale multi-story buildings more apparently. Therefore, this study followed the process of examining to joint types, producing their specimens and testing their structural performance. As a consequence of structural test, the dovetail joint specimen showed the best outcomes of the maximum load and rigidity. Synthesizing the structural performances by respective forms of joints, the Doraegeoji dovetail joint specimen showed the higher performance, followed in order by the Doraegeoji mortise joint specimen and the Tongneoko dovetail joint specimen. The structural performance of a building varies with the characteristics by the shouldering forms of penetrating beams and with the joint types within the columns. This should be considered for the new construction or restoration of multi-story buildings, and be continuously researched henceforth.

한국 전통 목조 건축물의 경우 구조적 성능은 재료 특성, 접합부의 형태, 치목의 정밀도 등에 따라 다르게 나타난다. 기존 사례 연구에서도 보와 기둥 접합부 형태는 변형 및 간격의 정도에 큰 영향을 미친다는 것을 보고하고 있다. 이는 단층 건물뿐만 아니라 대규모 다층 건물의 경우에도 마찬가지로 나타나고 있다. 따라서 본 연구에서는 접합부 형태에 대해 분석하고 모형을 제작하고 구조적 성능을 테스트하는 과정을 거쳤다. 그 결과, 주먹장맞춤의 실험체에서 최대 하중을 나타냈다. 각각의 형태의 접합부에 의한 구조적 성능을 종합하면, 도래걷이 주먹장맞춤이 가장 높은 성능을 나타내었으며, 다음으로 도래걷이 장부맞춤의 순으로 나타났다. 건물의 구조적 성능은 관통하는 보의 치목 형태와 기둥 내부의 접합부 형테에 따라 다르게 나타남을 알 수 있었으며, 이는 다층 건물의 신축 또는 복원을 위해 고려되어야하며 이후 계속 연구되어야 할것으로 사료된다.

Keywords

References

  1. Cultural Heritage Administration (2014), Cultural properties repair standard specifications.
  2. Chung, Y. S. (2006), A study on the joint and splice method of wooden architecture in joseon dynasty, Sungkyunkwan University doctoral thesis.
  3. Pack, C. Y. (2011), Influence factors on structural performance of traditional wooden dovetail joints, Seoul National University doctoral thesis.
  4. Lee, S. Y. (2010), Mechanical Modeling of dovetail joint in traditional wooden structures, Seoul National University master's thesis.
  5. Computers and Structures (1995), Inc, SAP2000 Integrated Finite Element Analysis and Design of Structures, Analysis Reference 1.
  6. Roy F. Pellerin, and Robert J. Ross (2002), Nondestructive Evaluation of Wood, Forest Products Society Madison, Wl.
  7. Jeong-Moon Seo, In-Ki1 Choi, and Jong-Rim Lee (1999), Static and Cyclic Behavior of Wooden Frames With Tenon Joints Under Lateral Load, Journal of Structural Engineering, 125(3), 344-349. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:3(344)