Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지
DOI QR코드

DOI QR Code

Buckling Analysis of Laminated Composite Trapezoidal Corrugated Plates

적층 복합재료 사다리꼴 주름판의 좌굴해석

  • Park, Kyung-Jo (Department of Mechanical Design Engineering, Chonnam National University) ;
  • Kim, Young-Wann (Department of Mechanical Design Engineering, Chonnam National University)
  • Received : 2019.04.11
  • Accepted : 2019.08.26
  • Published : 2019.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

This work investigates the elastic buckling characteristics of laminated composite trapezoidal corrugated plates with simply supported edges using the analytical method. In the analysis, three types of in-plane loading conditions: uniaxial, biaxial and shear loads are considered. Because it is very difficult to determine the mechanical behavior of 3-dimensional corrugated structures analytically, the equivalent homogenization model is adapted to investigate the overall mechanical behavior of corrugated plates. The corrugated element is homogenized as an orthotropic material. The previous formulae for bending rigidities of corrugated plate are adapted in this paper. The comparisons of the proposed analytical results with those of FEA based on the shell element are made to verify the proposed analytical method. In the comparison study both the critical buckling loads and the buckling mode shapes are presented. Some numerical results are presented to check the effect of the geometric properties.

본 연구에서는 단순지지 경계조건을 갖는 적층 복합재료 사다리꼴 주름판에 대한 탄성 좌굴특성을 이론적 방법을 이용하여 분석하였다. 좌굴 해석에서는 한 방향 하중, 두 방향 하중 및 전단하중 등 3가지 유형의 내평면 하중조건이 고려되었다. 3차원 주름 구조물을 해석적으로 기계적 거동을 표현하는 것이 매우 어렵기 때문에 본 해석에서는 주름판의 전반적인 좌굴 거동을 분석하기 위해 등가균질모델을 적용하였다. 이를 위해 단위 주름을 직교이방성재료로 등가시켰으며, 이전 연구에서 유도한 주름판에 대한 등가 굽힘강성계수식을 본 해석에 적용하였다. 제안된 이론해석 결과의 타당성을 검증하기 위해 셸요소를 바탕으로 한 3차원 유한요소해석을 수행하였으며, 두 방법을 이용해 얻은 임계 좌굴하중 및 좌굴형상을 비교하였다. 주름판의 기하형상에 따른 영향을 분석하기 위해 다양한 수치 예가 제시되었다.

Keywords

References

  1. Winkler, M., and Kress, G., "Influence of Corrugation Geometry on the Substitute Stiffness Matrix of Corrugated Laminates," Composite Structures, Vol. 94, No. 9, 2012, pp. 2827-2833. https://doi.org/10.1016/j.compstruct.2012.03.008
  2. Xia, Y., Friswell, M.I., and Flores, E.S., "Equivalent Models of Corrugated Panels," International Journal of Solids and Structures, Vol. 49, No. 13, 2012, pp. 1453-1462. https://doi.org/10.1016/j.ijsolstr.2012.02.023
  3. Ghabezi, P., and Golzar, M., "Mechanical Analysis of Trapezoidal Corrugated Composite Skins," Applied Composite Materials, Vol. 20, No. 4, 2013, pp. 341-353. https://doi.org/10.1007/s10443-012-9267-6
  4. Boorle, R.K., "Bending, Vibration and Vibro-acoustic Analysis of Composite Sandwich Plates with Corrugated Core," Ph.D Thesis, University of Michigan-Dearborn, USA, 2014.
  5. Shaw, A.D., Dayyani, I., and Friswell, M.I., "Optimisation of Composite Corrugated Skins for Buckling in Morphing Aircraft," Composite Structures, Vol. 119, 2015, pp. 227-237. https://doi.org/10.1016/j.compstruct.2014.09.001
  6. Park, K.J., Jung, K., and Kim, Y.W., "Evaluation of Homogenized Effective Properties for Corrugated Composite Panels," Composite Structures, Vol. 140, 2016, pp. 644-654. https://doi.org/10.1016/j.compstruct.2016.01.002
  7. Park, K.J., and Kim, Y.W., "Vibration Analysis of Laminated Composite Corrugated Plates," Composite Research, Vol. 29, No. 6, 2016, pp. 347-352. https://doi.org/10.7234/composres.2016.29.6.347
  8. Bai, J.B., Chen, D., Xiong, J.J., and Shenoi, R.A., "A Corrugated Flexible Composite Skin for Morphing Applications," Composites Part B: Engineering, Vol. 131, 2017, pp. 134-143. https://doi.org/10.1016/j.compositesb.2017.07.056
  9. Farzampour, A., Laman, J.A., and Mofid, M., "Behavior Prediction of Corrugated Steel Plate Shear Walls with Openings," Journal of Constructional Steel Research, Vol. 114, 2015, pp. 258-268. https://doi.org/10.1016/j.jcsr.2015.07.018
  10. Dou, C., Jiang, Z.-Q., Pi, Y.-L., and Guo, Y.-L., "Elastic Shear Buckling of Sinusoidally Corrugated Steel Plate Shear Wall," Engineering Structures, Vol. 121, 2016, pp. 136-146. https://doi.org/10.1016/j.engstruct.2016.04.047
  11. Jiaoa, P., Borchania, W., Soleimania, S., and McGraw, B., "Lateral-torsional Buckling Analysis of Wood Composite I-beams with Sinusoidal Corrugated Web," Thin-Walled Structures, Vol. 119, 2017, pp. 72-82. https://doi.org/10.1016/j.tws.2017.05.025
  12. Cao, Q., and Huang, J., "Experimental Study and Numerical Simulation of Corrugated Steel Plate Shear Walls Subjected to Cyclic Loads," Thin-Walled Structures, Vol. 127, 2018, pp. 306-317. https://doi.org/10.1016/j.tws.2018.01.042