Journal of the Korean Society for Aeronautical & Space Sciences (한국항공우주학회지)

The Korean Society for Aeronautical and Space Sciences (한국항공우주학회)
권호 표지
DOI QR코드

DOI QR Code

Influence of Design Parameters on the Behavior of Pyrotechnic Separation Nut

파이로테크닉 분리 너트 거동에 대한 설계 인자의 영향 분석

  • Received : 2019.05.21
  • Accepted : 2019.08.07
  • Published : 2019.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

The currently considered pyrotechnic separation nut is separated through the complicated process, because it has many internal moving parts and two variable-volume chambers connected by the vent hole. Therefore, it has many design parameters. Some of these are the contact angles between internal moving parts, the masses of the internal moving parts, the inner diameter of the push rod protrusion, the initial volumes of the chambers, the mass of the explosive charge, and the diameter of the vent hole. To improve the pyrotechnic separation nut, it is necessary to understand how the behavior of the separation nut is changed according to design parameters. In this point of view, parametric studies are carried out using the previously proposed prediction model for pyrotechnic separation nut behaviors. In each case, the parameter of the interest is changed while the others are kept unchanged. From the results, it is investigated how each design parameter influences the separation behavior.

벤트홀로 연결된 두 개의 가변 체적 챔버를 가지고 있는 파이로테크닉 분리 너트는 복잡한 과정을 통해 분리를 수행하므로 많은 설계 인자를 가지고 있다. 접촉부의 각도, 구성품의 질량, 누름봉 돌출부 안쪽 지름, 환형 챔버의 초기 부피, 확장 챔버의 초기 부피, 화약질량, 벤트홀 지름과 같은 설계 인자들의 변화에 따라 분리 너트의 성능이 어떻게 달라지는지를 파악하면 설계 개선 방향을 결정하는데 도움이 될 수 있다. 이에, 선행 연구를 통해 개발한 파이로테크닉 분리 너트 거동 예측 모델을 이용하여 매개변수 연구를 수행하였다. 다른 설계 인자의 값은 고정한 상태에서 한 설계인자의 값을 독립적으로 변화시키며 분리 시간이 어떻게 달라지는지, 변화의 원인이 무엇인지를 분석하였다.

Keywords

References

  1. Brauer, K. O., Handbook of Pyrotechnics, Chemical Publishing Co., New York, 1974.
  2. Woebkenberg, W., Matteo, D. N., and Williams, V. D., "Development of an Ultra-Low-Shock Separation Nut," The 16th Aerospace Mechanisms Symposium, NASA, United States, 1982, pp. 87-98.
  3. Chang, K. Y., "Pyrotechnic Devices, Shock Levels and Their Applications," 9th International Congress on Sound and Vibration, Orlando, FL, 2002.
  4. Harris, C. M., and Piersol, A. G., "Pyroshock Testing," Harris' Shock and Vibration Handbook, 5th ed., McGraw-Hill, New York, 2002, pp. 26.15-26.33.
  5. Fosness, E. R., Buckley, S. J., and Gammill, W. F., "Deployment and Release Devices Efforts at the Air Force Research Laboratory Space Vehicles Directorate," AIAA Space 2001 Conference and Exposition, AIAA Paper 2001-4601, 2001.
  6. Woo, J. M., Kang, D. H., Choi, J., Y., Kim, J. H., Cho, J. Y., Jang, S. G., and Yang, H. W., "Effect of Clearance on Clamping Characteristics of Segmented Nuts in Pyrotechnic Separation Nut," Journal of The Korean Society for Aeronautical and Space Sciences, Vol. 46, No. 12, 2018, pp. 994-1003. https://doi.org/10.5139/JKSAS.2018.46.12.994
  7. Woo, J. M., Cha, S. W., Cho, J. Y., Kim, J. H., Roh, T. S., Jang, S. G., Lee, H. N., and Yang, H. W., "Prediction of Pyroshock-Reduced Separation Nut Behaviors," Journal of Propulsion and Power, Vol. 34, No. 5, 2018, pp. 1240-1255. https://doi.org/10.2514/1.B36906
  8. Han, D. H., Sung, H. G., Jang, S. G., and Ryu, B. T., "Parametric Analysis and Design Optimization of a Pyrotechnically Actuated Device," International Journal of Aeronautical and Space Sciences, Vol. 17, No. 3, 2016, pp. 409-422. https://doi.org/10.5139/IJASS.2016.17.3.409
  9. Choi, J. Y., Woo, J. M., Kang, D. H., Kim, J. H., Cho, J. Y., Jang, S. G., and Yang, H. W., "Bolt Loosening Analysis under Transverse Vibration for Design of Reliable Pyrotechnic Separation Nut," Journal of The Korean Society for Aeronautical and Space Sciences, Vol. 46, No. 12, 2018, pp. 1004-1011. https://doi.org/10.5139/JKSAS.2018.46.12.1004
  10. Saltelli, A., Tarantola, S., Campolongo, F., and Ratto, M., Sensitivity Analysis in Practice: A Guide to Assessing Scientific Models, John Wiley & Sons Ltd, Chichester, 2004.