드라이브 ㆍ 컨트롤 (Journal of Drive and Control)

  • 제16권3호
  • /
  • Pages.59-66
  • /
  • 2019
  • /
  • 2671-7972(pISSN)
  • /
  • 2671-7980(eISSN)
유공압건설기계학회 (The Korean Society for Fluid Power and Construction Equipment)
권호 표지
DOI QR코드

DOI QR Code

컨볼루션을 이용한 전자 유압 시스템의 피크압력 저감 제어 연구

A Study of Peak Pressure Reduction Control of Electro Hydraulic System using Convolution

  • Kim, Kyung Soo (Korea Construction Equipment Technology Institute) ;
  • Jeong, Jin Beom (Korea Construction Equipment Technology Institute) ;
  • Ryuh, Beom Sahng (Department of Mechanical System Engineering, Chonbuk National University)
  • 투고 : 2019.06.19
  • 심사 : 2019.08.20
  • 발행 : 2019.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Hydraulic systems are essential for most of the construction equipments due to their various advantages, such as very powerful, quick response speed, precision control and remote control. Moreover, they are necessary to apply the electro hydraulic systems for precise and remote controls. Operating the small electronic joystick of the remote controller for the control of a multipurpose work machine with remote control technology increases the possibility of a sudden operation compared to the use of a conventional hydraulic joystick. When a joystick is suddenly operated, the peak pressure is generated in the system due to the quick response of the system. Then a vibration is generated due to the peak pressure, which causes instability to the operation of the construction equipment. Therefore, in this study, we confirmed the level of reduction of peak pressure occurring in the electro hydraulic system by using AMESim, when the output signal of the step shape generated by the sudden operation of the electronic joystick was changed by using the convolution operation.

키워드

참고문헌

  1. I. H. Jin et al., "Study on the Remote Control Excavator for High-Risk Operations", Proceedings of 2010 The 25th ICROS Annual Conference, pp.479-483, 2010.
  2. Y. M. Jeong and S. Y. Yang, "Development Trend of Remote Control Technology of Construction Machinery", Journal of Drive and Control, Vol.12, No.1, pp.34-38, 2015. https://doi.org/10.7839/ksfc.2015.12.2.034
  3. Y. M. Jeong and S. Y. Yang, "Application case of Sensor System Development for Excavator Automation", Journal of Drive and Control, Vol. 12, No.3, pp.77-81, 2015. https://doi.org/10.7839/ksfc.2015.12.4.077
  4. J. B. Jeong and K. S. Kim, "A Study on driving algorithm and communication characteristics for remote control of mini excavator", Journal of Drive and Control, Vol.15, No.4, pp.81-90, 2018. https://doi.org/10.7839/KSFC.2018.15.4.081
  5. B. S. Yoo, S. W. Koo and J. S. Joh, "A Study on Suppression of Vibration Caused by Quick-stop Operation of Hydraulic Excavator Boom", Journal of the Korean Society for Precision Engineering, Vol.27, No.12, pp.33-40, 2010.
  6. K. Y. Kim, D. S. Jang and H. S. Ahn, "A Study on the Bucket Trajectory Control for the Intelligent Excavation System", Journal of Drive and Control, Vol.5, No.2, pp.12-16, 2008.
  7. D. T. Jeong et al., "Mission Scenario-based Design of Hydraulic Manipulators for Armored Robot Systems", Journal of Drive and Control, Vol.14, No.4, pp.51-60, 2017. https://doi.org/10.7839/KSFC.2017.14.4.051
  8. J. J. Craig, "Introduction to Robotics: Mechanics and Control", Addison-Wesley Longman Publishing Co., Inc., Boston, 1989.
  9. R. L. Norton, "Kinematics and Dynamics of Machinery", McGraw-Hill Inc., New York, 2009.
  10. C. H. Lee, "Digital Signal Processing", HANBIT Academy, Inc., Seoul, 2013.

피인용 문헌

  1. Independent Metering Valve: A Review of Advances in Hydraulic Machinery vol.17, pp.4, 2019, https://doi.org/10.7839/ksfc.2020.17.4.054