DOI QR코드

DOI QR Code

Computer modeling of elastoplastic stress state of fibrous composites with hole

  • Polatov, Askhad M. (Department of Mathematics, National University of Uzbekistan) ;
  • Ikramov, Akhmat M. (Department of Mathematics, National University of Uzbekistan) ;
  • Khaldjigitov, Abduvali A. (Samarkand branch of Tashkent University of Information Technologies)
  • Received : 2019.02.19
  • Accepted : 2019.05.26
  • Published : 2019.08.25

Abstract

The paper represents computer modeling of the deformed state of physically nonlinear transversally isotropic bodies with hole. In order to describe the anisotropy of the mechanical properties of transversally-isotropic materials a structurally phenomenological model has been used. This model allows representing the initial material in the form of the coupled isotropic materials: the basic material (binder) considered from the positions of continuum mechanics and the fiber material oriented along the anisotropy direction of the original material. It is assumed that the fibers perceive only the axial tensile-compression forces and are deformed together with the base material. To solve the problems of the theory of plasticity, simplified theories of small elastoplastic deformation have been used for a transversely-isotropic body, developed by B.E. Pobedrya. A simplified theory allows applying the theory of small elastoplastic deformations to solve specific applied problems, since in this case the fibrous medium is replaced by an equivalent transversely isotropic medium with effective mechanical parameters. The essence of simplification is that with simple stretching of composite in direction of the transversal isotropy axis and in direction perpendicular to it, plastic deformations do not arise. As a result, the intensity of stresses and deformations both along the principal axis of the transversal isotropy and along the perpendicular plane of isotropy is determined separately. The representation of the fibrous composite in the form of a homogeneous anisotropic material with effective mechanical parameters allows for a sufficiently accurate calculation of stresses and strains. The calculation is carried out under different loading conditions, keeping in mind that both sizes characterizing the fibrous material fiber thickness and the gap between the fibers-are several orders smaller than the radius of the hole. Based on the simplified theory and the finite element method, a computer model of nonlinear deformation of fibrous composites is constructed. For carrying out computational experiments, a specialized software package was developed. The effect of hole configuration on the distribution of deformation and stress fields in the vicinity of concentrators was investigated.

Keywords

References

  1. Andrianov, I.V., Bolshakov, V.I., Danishevs'kyy, V.V. and Weichert, D. (2007), "Asymptotic simulation of imperfect bonding in periodic fibre-reinforced composite materials under axial shear", Int. J. Mech. Sci., 49(12), 1344-1354. https://doi.org/10.1016/j.ijmecsci.2007.04.002
  2. Brovko, G.L., Bykov, D.L., Vasin, R.A., Georgievskii, D.V., Kiiko, I.A., Molodtsov, I.N. and Pobedrya, B.E. (2011), "A. A. Il'yushin's scientific heritage and development of his ideas in mechanics", Mech. Solids, 46(1), 3-14. https://doi.org/10.3103/S002565441101002X.
  3. Ghinet, S., Atalla, N. and Osman, H. (2005), "The transmission loss of curved laminates and sandwich composite panels", J. Acoust. Soc. America, 118(2), 774-790. https://doi.org/10.1121/1.1932212.
  4. Jain, N.K. and Mittal, N.D. (2008), "Finite element analysis for stress concentration and deflection in isotropic, orthotropic and laminated composite plates with central circular hole under transverse static loading", Mater. Sci. Eng., 498(1-2), 115-124. https://doi.org/10.1016/j.msea.2008.04.078.
  5. Karpov, E.V. (2002), "Influence of the fibrous structure on stress concentration near a circular hole in borallum", Dyn. Contin. Medium, 120, 137-144.
  6. Khaldjigitov, A.A. (2003), "Plasticity theories for transversely isotropic materials", Proceedings of the 7th International Conference on Computational Plasticity, Barcelona, Spain, April.
  7. Lee, J., Lee, M.G., Barlat, F. and Kim, J.H. (2012), "Stress integration schemes for novel homogeneous anisotropic hardening model", Comput. Meth. Appl. Mech. Eng., 247-248, 73-92. https://doi.org/10.1016/j.cma.2012.07.013.
  8. Pobedrya, B.Y. (1994), "The problem in terms of a stress tensor for an anisotropic medium", J. Appl. Math. Mech., 58(1), 81-89. https://doi.org/10.1016/0021-8928(94)90032-9.
  9. Pobedrya, B.E. (1984), Mechanics of Composite Materials, Moscow State University, Moscow, Russia. (in Russian).
  10. Polatov, A.M. (2013), "Numerical simulation of elastoplastic stress concentration in fibrous composites", Coupled Syst. Mech., 2(3), 271-288. https://doi.org/10.12989/csm.2013.2.3.271.
  11. Polatov, A.M. and Nodirjanova, N.A. (2014), "Software and research of fibrous composite materials' elastic-plastic deformation", Int. J. Sci. Eng. Res., 5(12), 1288-1294.
  12. Shaik, A.S. and Mirzana, I.M. (2016), "Stress concentration of rectangular plate with a hole made with composite material using finite element analysis", J. Mech. Civ. Eng., 13(4), 1-5.
  13. Tomashevskiy, S.B. (2011), "Effect of elastoplastic deformations on the results of the calculation of contact problems of rail transport", Bull. Bryansk State Tech. Univ., 3, 17-23. (in Russian).
  14. Van Der Meer, F.P. and Sluys, L.J. (2009), "Continuum models for the analysis of progressive failure in composite laminates", J. Compos. Mater., 43(20), 2131-2156. https://doi.org/10.1177%2F0021998309343054. https://doi.org/10.1177/0021998309343054
  15. Vasil'yev, V.V., Protasov, V.D. and Bolotin, V.V. (1990), Composite Materials: Handbook, Mashinostroenie, Moscow, Russia (in Russian).
  16. Yang, F. and Chow, C.L. (1998), "Progressive damage of unidirectional graphite/epoxy composites containing a circular hole", J. Compos. Mater., 32(6), 504-525. https://doi.org/10.1177%2F002199839803200601. https://doi.org/10.1177/002199839803200601
  17. Yazici, M. (2007), "Elasto-plastic analysis of stress around square hole", Indian J. Eng. Mater. Sci., 14, 215-219.