한국구조물진단유지관리공학회 논문집 (Journal of the Korea institute for structural maintenance and inspection)

  • 제23권1호
  • /
  • Pages.130-137
  • /
  • 2019
  • /
  • 2234-6937(pISSN)
  • /
  • 2287-6979(eISSN)
한국구조물진단유지관리공학회 (Korea Institute for Structural Maintenance Inspection)
권호 표지
DOI QR코드

DOI QR Code

SMA 와이어를 이용한 연결재의 인발저항성능 평가

Evaluation of the Pull-out Resistance of the SMA Wire Connector

  • 정치영 (부산대학교 지진방재연구센터) ;
  • 우태련 (부산대학교 사회환경시스템공학과) ;
  • 이종한 (대구대학교 건설시스템공학과) ;
  • 정진환 (부산대학교 사회환경시스템공학과)
  • 투고 : 2018.10.19
  • 심사 : 2018.12.10
  • 발행 : 2019.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

PC구조형식은 사전 제작된 PC 부재를 현장에서 거치한 후 추가 긴장력 도입 및 연결부 시공의 과정을 거쳐서 구조물을 완성시키는 형식이다. 하지만 현장타설부와 PC부 사이 부착면에서 균열발생 및 수밀성 감소에 따른 누수문제가 발생할 수 있다. 이러한 균열 및 누수문제는 철근의 부식을 초래할 수 있으며, 이는 구조물의 장기사용 내구성을 급격히 감소시키는 주요 원인이 될 수 있다. 본 연구에서는 기존 PC 구조물 접합부 경계면에서의 부착력 부족에 대한 문제를 해결하기 위해서, 형상기억합금을 활용한 표면처리 부재를 제안하고, 형상기억합금 와이어를 이용한 연결부의 성능을 평가하고자 하였다. 이를 위해서 본 연구는 해당 기술 실현을 위한 사전연구로서 와이어의 개수와 절곡유무, 그리고 형상기억효과 발현 유무에 따른 연결재의 인발력을 평가하고자 하였다. 연구결과를 통해서 SMA 연결재의 인발저항성능을 결정짓는 연결부의 형상효과와 형상기억발현효과, 그리고 부착효과에 대해서 평가할 수 있었다. 또한 이에 대한 설계변수별 예측식을 제안하였고, 예측값과 실험값 간의 유효성을 확인하였다.

Precast concrete (PC) structure is one of the type of the structures which is made in a facility prior to installing it to a construction field. The contact surfaces between two PC structures should be treated for obtaining enough binding force by inducing prestressing force. However, in the many cases, the contact surface causes the crack and leakage of water. These cracks and water leakage can cause the corrosion of the rebar, and the corrosion of the rebar can severely reduce the long-term durability. In this study, the SMA wire connector is suggested to solve the problem with the contact surfaces between two PC structures. The pull-out resistance of the suggested SMA wire connector is evaluated by conducting the tests to find the effect of the number of wires, shape of connector part, and shape memory effect. As a result of this study, the empirical formula is suggested to estimate the pull-out resistance related with the effects of the shape of the connector, shape memory effect, and the adhesive force. The validity between the estimated pull-out resistance and the measured value is confirmed.

키워드

참고문헌

  1. Song, J. J., Hwang, Y. K. (2016), Field Application of Connecting Members to Construct Slab Type Precast Modular Bridge, Proceeding of the Conference of the Korea Institute for Structural Maintenance and Inspection, 205-206.
  2. Lee, J. M., Lee, S. Y., Song, J. J., Park, K. H. (2015), Static Load Tests on Flexural Strength and Crack Serviceability of a Longitudinal Joint for the Slab-Type Precast Modular Bridges, Journal of the Korea Concrete Institute, 27(2), 137-145. https://doi.org/10.4334/JKCI.2015.27.2.137
  3. Lee, P. G., Park, C. H., Jung, E. J. (2013), R&D in Modular Bridges, Magazine of the Korea Concrete Institute, 25(2), 16-20. https://doi.org/10.22636/MKCI.2013.25.2.16
  4. Kuang, Y. and Ou, J. (2008), Self-repairing performance of concrete beams strengthened using superelastic SMA wires in combination with adhesives released from hollow fibers, Smart Materials and Structures, 17(2), 025020. https://doi.org/10.1088/0964-1726/17/2/025020
  5. Park, J. H. and Yun, S. N. (2009), Basic Characteristic of Shape Memory Alloy and Its Application, Journal of the Korea fluid power systems society, 6(2), 34-39.
  6. B. Kwak, D. Kim, and E. Choi (2010), The Behavior of Steel Jakets for Compressive Concrete Composite Member under Cyclic Loading, Proceeding of the Conference of Korean Society of Civil Engineering, 1239-1242.
  7. Choi, E., Kim, D., Chung, Y. S. and Nam, T. H. (2014), Bond-slip characteristics of SMA reinforcing fibers obtained by pull-out tests, Materials research bulletin, 58, 28-31. https://doi.org/10.1016/j.materresbull.2014.04.060
  8. Shajil, N., Srinivasan, M., and Santhanam, M. (2013), Self-centering of shape memory alloy fiber reinforced cement mortar members subjected to strong cyclic loading, Materials and Structures, 46(4), 651-661. https://doi.org/10.1617/s11527-012-9923-1
  9. Kim, D. J., Kim, H. A., Chung, Y. S., and Choi, E. (2014), Pullout resistance of straight NiTi shape memory alloy fibers in cement mortar after cold drawing and heat treatment, Composite Engineering, 67, 588-594. https://doi.org/10.1016/j.compositesb.2014.08.018
  10. Choi, E., Kim, D. J., Chung, Y. S., Kim, H. S., and Jung, C. (2015), Crack-closing of cement mortar beams using NiTi cold-drawn SMA short fibers, Smart materials & structures, 24(1), 015018. https://doi.org/10.1088/0964-1726/24/1/015018
  11. Kim, M. K., Kim, D. J., Chung, Y. S., and Choi, E. (2016), Direct tensile behavior of shape-memory-alloy fiber-reinforced cement composites, Construction and Building Materials, 102, 462-470. https://doi.org/10.1016/j.conbuildmat.2015.11.015