Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Design procedure for seismic retrofit of RC beam-column joint using single diagonal haunch

  • Zabihi, Alireza (Centre for Sustainable Infrastructure, Swinburne University of Technology) ;
  • Tsang, Hing-Ho (Centre for Sustainable Infrastructure, Swinburne University of Technology) ;
  • Gad, Emad F. (Centre for Sustainable Infrastructure, Swinburne University of Technology) ;
  • Wilson, John L. (Centre for Sustainable Infrastructure, Swinburne University of Technology)
  • Received : 2019.02.20
  • Accepted : 2019.04.05
  • Published : 2019.08.25
⟨ Previous Next ⟩

Abstract

Exterior beam-column joint is typically the weakest link in a limited-ductile reinforced concrete (RC) frame structure. The use of diagonal haunch element has been considered as a desirable seismic retrofit option for reducing the seismic demand at the joint. Previous research globally has focused on implementing double haunches, while the use of single haunch element as a less-invasive and more architecturally favorable retrofit option has not been investigated. In this paper, the key formulations and a design procedure for the single haunch system for retrofitting RC exterior beam-column joint are developed. An application of the proposed design procedure is then illustrated through a case study.

Keywords

Acknowledgement

Supported by : Bushfire and Natural Hazards Cooperative Research Centre

References

  1. Akbar, J., Ahmad, N., Alam, B. and Ashraf, M. (2018), "Seismic performance of RC frames retrofitted with haunch technique", Struct. Eng. Mech., 67(1), 1-8. https://doi.org/10.12989/sem.2018.67.1.001.
  2. Australian Building Codes Board (2016), National Construction Code of Australia - Class 2 and 9 Buildings - Volume One, Canberra, ACT, Australia.
  3. Aycardi, L.E., Mander, J.B. and Reinhorn, A.M. (1994), "Seismic resistance of reinforced concrete frame structures designed only for gravity loads", ACI Struct. J., 91(5), 552-563.
  4. Beres, A., El-Borgi, S., White, R.N. and Gergely, P. (1992), "Experimental results of repaired and retrofitted beam-column joint tests in lightly reinforced concrete frame buildings", NCEER-92-0025; National Center for Earthquake Engineering Research, Taipei, Taiwan. http://hdl.handle.net/10477/610.
  5. Beres, A., Pessiki, S.P., White, R.N. and Gergely, P. (1996), "Implications of experiments on the seismic behavior of gravity load designed RC beam-to-column connections", Earthq. Spectra, 12(2), 185-198. https://doi.org/10.1193/1.1585876.
  6. Calvi, G.M., Magenes, G. and Pampanin, S. (2002), "Relevance of beam-column joint damage and collapse in RC frame assessment", J. Earthq. Eng., 6(S1),75-100.
  7. Chen, T. (2006), "Retrofit strategy of non-seismically designed frame systems based on a metallic haunch system", M.Sc. Dissertation, University of Canterbury, Christchurch.
  8. Genesio, G. (2012), "Seismic assessment of RC exterior beam-column joints and retrofit with haunches using post-installed anchors", Ph.D. Dissertation, University of Stuttgart, Stuttgart.
  9. Ghobarah, A. and Said, A. (2002), "Shear strengthening of beam-column joints", Eng. Struct., 24(7), 881-888. https://doi.org/10.1016/S0141-0296(02)00026-3.
  10. Hertanto, E. (2005), "Seismic assessment of pre-1970s reinforced concrete structure", M.Sc. Dissertation, University of Canterbury, Christchurch.
  11. Lam, N.T.K., Tsang, H.H., Lumantarna, E. and Wilson, J.L. (2016), "Minimum loading requirements for areas of low seismicity", Earthq. Struct., 11(4), 539-561. https://doi.org/10.12989/eas.2016.11.4.539.
  12. Pampanin, S., Magenes, G. and Carr, A. (2003), "Modelling of shear hinge mechanism in poorly detailed RC beam-column joints", Proceedings of the FIB 2003 Symposium, Athens. http://hdl.handle.net/10092/194.
  13. Pampanin, S., Bolognini, D., Pavese, A., Magenes, G. and Calvi, G.M. (2004), "Multi-level seismic rehabilitation of existing frame systems and subassemblies using FRP composites", Proceedings of the 2nd International Conference on FRP Composites in Civil Engineering, Adelaide, Australia, December.
  14. Pampanin, S., Christopoulos, C. and Chen, T. (2006), "Development and validation of a metallic haunch seismic retrofit solution for existing under-designed RC frame buildings", Earthq. Eng. Struct. Dynam., 35(14), 1739-1766. https://doi.org/10.1002/eqe.600.
  15. Park, R. and Paulay, T. (1975), Reinforced Concrete Struct., John Wiley and Sons, USA.
  16. Paulay, T. and Park, R. (1984), "Joints in reinforced concrete frames designed for earthquake resistance", Report prepared for the U.S.-N.Z.-Japan Seminar, Christchurch, July.
  17. Priestley, M.J.N. (1997), "Displacement-based seismic assessment of reinforced concrete buildings", J. Earthq. Eng., 1(1), 157-192. https://doi.org/10.1080/13632469708962365
  18. Raza, S., Tsang, H.H. and Wilson, J.L. (2018), "Unified models for post-peak failure drifts of normaland high-strength RC columns", Mag. Concrete Res., 70(21), 1081-1101. https://doi.org/10.1680/jmacr.17.00375
  19. Sharma, A., Reddy, G.R., Eligehausen, R., Genesio, G. and Pampanin, S. (2014), "Seismic response of reinforced concrete frames with haunch retrofit solution", ACI Struct. J., 111(3), 673-684. https://doi.org/10.14359/51686625
  20. Sharma, A., Eligehausen, R. and Reddy, G.R. (2011), "A new model to simulate joint shear behavior of poorly detailed beam-column connections in RC structures under seismic loads, Part I: Exterior joints", Eng. Struct., 33(3), 1034-1051. https://doi.org/10.1016/j.engstruct.2010.12.026.
  21. Shiravand, M.R., Nejad, A.K. and Bayanifar, M.H. (2017), "Seismic response of RC structures rehabilitated with SMA under near-field earthquakes", Struct. Eng. Mech., 63(4), 497-507. https://doi.org/10.12989/sem.2017.63.4.497.
  22. Singh, B., Chidambaram, R.S., Sharma, S. and Kwatra, N. (2017), "Behavior of FRP strengthened RC brick in-filled frames subjected to cyclic loading", Struct. Eng. Mech., 64(5), 557-566. https://doi.org/10.12989/sem.2017.64.5.557.
  23. Standards Australia (2007), AS 1170.4-2007, Structural Design Actions; Part 4: Earthquake Actions, Australian Standard; Sydney, Australia.
  24. Tasligedik, A.S., Akguzel U., Kam W.Y. and Pampanin, S. (2018), "Strength hierarchy at reinforced concrete beam- column joints and global capacity strength hierarchy at reinforced concrete beam-column joints and global capacity", J. Earthq. Eng., 22(3), 454-487. https://doi.org/10.1080/13632469.2016.1233916.
  25. The United States Geological Survey (2018), Earthquake Statistics, USA. https://earthquake.usgs.gov/
  26. Tsang, H.H., Wilson, J.L., Lam, N.T.K. and Su, R.K.L. (2017), "A design spectrum model for flexible soil sites in regions of low-to-moderate seismicity", Soil Dynam. Earthq. Eng., 92, 36-45. https://doi.org/10.1016/j.soildyn.2016.09.035.
  27. Tsang H.H., Wilson, J.L. and Lam, N.T.K. (2017), "A refined design spectrum model for regions of lower seismicity", Australian J. Struct. Eng., 18(1), 3-10. https://doi.org/10.1080/13287982.2017.1297529.
  28. Tsonos, A.G. (1999), "Lateral load response of strengthened reinforced concrete beam to column joints", ACI Struct. J., 96, 46-56.
  29. Wibowo, A., Wilson, J.L., Lam, N. TK. and Gad, E.F. (2014), "Drift performance of lightly reinforced concrete columns", Eng. Struct., 59, 522-535. https://doi.org/10.1016/j.engstruct.2013.11.016.
  30. Wilson, J.L., Wibowo, A., Lam, N.T.K. and Gad, E.F. (2015), "Drift behaviour of lightly reinforced concrete columns and structural walls for seismic design applications", Australian J. Struct. Eng., 16(1), 62-74.
  31. Yu, Q. "Kent", Uang, C. and Gross, J. (2000), "Seismic rehabilitation design of steel moment connection", ASCE J. Struct. Eng., 126(1), 69-78. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:1(69).
  32. Zabihi, A., Tsang, H.H., Gad, E.F. and Wilson, J.L. (2018), "Seismic retrofit of exterior RC beam-column joint using diagonal haunch", Eng. Struct., 174, 753-767. https://doi.org/10.1016/j.engstruct.2018.07.100.