한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제18권6호
  • /
  • Pages.33-38
  • /
  • 2019
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

곡선형 냉각채널 금형을 사용한 프론트 필라 핫스탬핑 공정에서 금형냉각시간이 기계적 특성에 미치는 영향

Effect of Die Cooling Time on Component Mechanical Properties in a Front Pillar Hot Stamping Process

  • 투고 : 2019.04.10
  • 심사 : 2019.05.17
  • 발행 : 2019.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Researchers have recently begun to study hot stamping processes to shorten the mold cooling time and improve productivity. These publications explain that the mold cooling time can be reduced by using a curved cooling channel, where the mold surface is processed to a uniform depth, instead of a straight cooling channel that uses the conventional gun drilling machine. This study investigates the characteristics of the front pillar of an automobile after using a mold with a curved cooling channel. To analyze the change in properties, we used a 1.6 mm boron steel blank and heated the prototype at $930^{\circ}C$ for 5 minutes. Next, we formed the prototype with a load of about 500 tons while varying the mold cooling time between 1 and 10 seconds. We subjected each prototype specimen to a tensile strength test, a hardness test, and a tissue surface observation.

키워드

참고문헌

  1. Lee, K., Lee, J. J., & Suh, C. H., "Evaluation of Cooling Capability of Hot Press Forming Die with Thermal CFD Simulation", Transactions of Materials Processing, Vol. 25, No. 4, pp. 242-247, 2016. https://doi.org/10.5228/KSTP.2016.25.4.242
  2. Hoffmann, H., So, H., & Steinbeiss, H., "Design of Hot Stamping Tools with Cooling System", CIRP Annals, Vol. 56, No. 1, pp 269-272, 2007. https://doi.org/10.1016/j.cirp.2007.05.062
  3. Li, Y., Ying, L., Hu, P., Shi, D., Zhao, X., & Dai, M., "Coupled Numerical Simulation of Hot Stamping Process and Experimental Verification", AIP Conference Proceedings, Vol. 1532, No. 1, pp 471-477, 2013.
  4. Cha, S. H., Seo, P. K., Nam, J. D., Ahn, M. S., & Won, K. W., "Cooling Performance Evaluation of Roof Side Die according to the Thermal Conductivity of Tool Steels", Journal of The Korean Society For Technology of Plasticity, pp. 111-114, 2014.
  5. Kum, J. W., Park, O. J., & Hong, S. M., "Tough High Thermal-Conductivity Tool Steel for Hot Press Forming", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 3, pp. 130-134, 2016. https://doi.org/10.14775/ksmpe.2016.15.3.130
  6. Hong, S. M., Ryu, S. Y., Park, J. K., Yoon, S. J., Kim, K. J., & Kim, H. Y.,"Design of cooling channel in hot press forming process of Boron Steel", Journal of The Korean Society For Technology of Plasticity, pp. 367-370, 2009.
  7. Lin, T., Song, H. W., Zhang, S. H., Cheng, M., & Liu, W. J., "Cooling system design in hot stamping tools by a thermal-fluid-mechanical coupled approach", Advances in Mechanical Engineering, Vol. 6, 2014.
  8. Lee, S. Y., Lee, K., Lim, Y. H., & Jeong, W. C.,"Study on Heat Transfer Characteristic in Hot Press Forming Process", Transactions of Materials Processing, Vol. 22, No. 2, pp. 101-107, 2013. https://doi.org/10.5228/KSTP.2013.22.2.101