Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Durability Study due to Shape of Clutch Pressure Plate

클러치 압력판의 형상에 따른 내구성 연구

  • Han, Moonsik (Department of Mechanical and Automotive Engineering, Keimyung UNIV.) ;
  • Cho, Jaeung (Division of Mechanical and Automotive Engineering, Kongju National UNIV.)
  • 한문식 (계명대학교 기계자동차공학과) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Received : 2019.05.30
  • Accepted : 2019.06.07
  • Published : 2019.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

The design of pressure plate for automotive clutch also has been improved. The tension of the clutch spring compresses the clutch plate onto the flywheel to deliver the power. In this study, three types of pressure plate for clutch were modelled by using CATIA program, and the structural analyses due to external forces were performed with ANSYS program. It is thought that this study result can be used to verify the stability and strength according to the shape of the pressure plate.

Keywords

References

  1. Lee, J. I., “The Convergence Design for Stiffness and Structure Advancement of Automotive Body,” Journal of the Korea Convergence Society, Vol. 8, No. 4, pp. 189-197, 2017. https://doi.org/10.15207/JKCS.2017.8.4.189
  2. Kim, Y. J., Ro, S. H., Shin, H. B., Shin, Y. H., Jung, K. S. and Nam, K. D., “Effects of Design Alterations on the Vibration Suppression of a Machine Tool Structure,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 3, pp. 122-129, 2016. https://doi.org/10.14775/ksmpe.2016.15.3.122
  3. Cho, J. U., "Study on Convergence Technique through Structural Analysis on the Axle of Railway Vehicle," Journal of the Korea Convergence Society, Vol. 6, No. 1, pp. 93-101, 2015. https://doi.org/10.15207/JKCS.2015.6.1.093
  4. Kim, S. Y., Lee, J. B. and Kim, K. S., “A Study on the Dynamic Analysis of Recliner Gear for Vehicle Power Seats,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 6, pp. 15-20, 2017. https://doi.org/10.14775/ksmpe.2017.16.6.015
  5. Kim, D. E., Kim, J. H. and Kang, M. C., "Test and Evaluation based on Standard Regulation of USA Federal Automotive Safety of Assistant Driver"s Seat Airbag at Low Risk Deployment Passenger Airbag using Passenger Protection Wrap," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 1, pp. 61-67, 2016. https://doi.org/10.14775/ksmpe.2016.15.1.061
  6. Bae, H. E., Kim, H. S. Ryu, M. R. and Jeon, H. Y., "A Study on Braking Performance of Brake Disc with Dual-Material," Journal of Korean Society of Mechanical Technology, Vol. 20, No. 3, pp. 300-305, 2018. https://doi.org/10.17958/ksmt.20.3.201806.300
  7. Wang, Z. H., Byun, S. J. and Kwon, Y. C., "Fatigue and Vibration Analysis of Table according to Applied Loads," Journal of Korean Society of Mechanical Technology, Vol. 20, No. 5, pp. 568-573, 2018. https://doi.org/10.17958/ksmt.20.5.201810.568
  8. Wang, Z. H. and Kwon, Y. C., "Structural Analysis of Center Pillar according to Applied Load," Journal of Korean Society of Mechanical Technology, Vol. 20, No. 4, pp. 401-406, 2018. https://doi.org/10.17958/ksmt.20.4.201808.401
  9. Lee, B. H., Lee, C. R., Jeong, Y. J. and Kim, B. H., "A Study on the Structural Analysis of Electric Vehicle Rotor Shaft for Light-Weight," Journal of Korean Society of Mechanical Technology, Vol. 20, No. 2, pp. 154-159, 2018. https://doi.org/10.17958/ksmt.20.2.201804.154
  10. Jeong, S. H. and Kim, H. S., "Durability Analysis of Timing Belt Pulley in Rotational Unit using Finite Element Analysis," Journal of Korean Society of Mechanical Technology, Vol. 19, No. 5, pp. 677-683, 2017. https://doi.org/10.17958/ksmt.19.5.201710.677
  11. Han, M. S. and Cho, J. U., "Structural and Fatigue Analysis on Shock Absorber Mount of Automobile," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 125-133, 2012.
  12. Han, M. S. and Cho, J. U., "A Study on Durability of Under Bar at Car through Structural and Fatigue Analysis," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 44-50, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.044
  13. Han, M. S. and Cho, J. U., "Structural Safety Analysis on Bicycle Suspension Seat Post," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 4, pp. 72-81, 2012.
  14. Han, M. S. and Cho, J. U., "Structural and Fatigue Analysis on Shock Absorber Mount of Automobile," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 125-133, 2012.
  15. Jung, S. H., "The Control of Spring-Mass-Damper Convergence System using $H{\infty}$ Controller and ${\mu}$- Synthesis Controller", Journal of the Korea Convergence Society, Vol. 8, No. 5, pp. 1-11, 2017. https://doi.org/10.15207/JKCS.2017.8.5.001

Cited by

  1. 자동차 리프트 형상에 따른 내구성 해석을 통한 융합 연구 vol.10, pp.12, 2019, https://doi.org/10.15207/jkcs.2019.10.12.281