DOI QR코드

DOI QR Code

Design of Asymmetric Pre-swirl Stator for KVLCC2 Considering Angle of Attack in Non-uniform Flow Fields of the Stern

선미의 불균일 유동장에서 받음각을 고려한 비대칭 전류고정날개 설계

  • Lee, Ki-Seung (Department of Naval Architecture & Ocean Engineering, Pusan National University) ;
  • Kim, Moon-Chan (Department of Naval Architecture & Ocean Engineering, Pusan National University) ;
  • Shin, Yong-Jin (Department of Naval Architecture & Ocean Engineering, Pusan National University) ;
  • Kang, Jin-Gu (Department of Naval Architecture & Ocean Engineering, Pusan National University)
  • Received : 2018.12.05
  • Accepted : 2019.03.06
  • Published : 2019.08.20

Abstract

International Maritime Organization (IMO) regulates an emission of greenhouse gases by creating an Energy Efficiency Design Index (EEDI) to reduce environmental pollution. In propulsion system field, studies are under way on Energy Saving Device (ESD), which can improve propulsion efficiency with the propeller, to reduce the EEDI. Among the studies, the study of Pre-Swirl Stator (PSS) has been actively conducted from long time ago. Recently the variable pith angle type pre-swirl stator has been studied to improve the propulsion efficiency in non-uniform flow fields of the Stern. However, for traditional design methods, no specific design method has been established on the blade or location of radius. In this study, proper design method is proposed for each blade or location for radius according to hydrodynamic pitch angle.

Keywords

References

  1. Guedes Soares, & C., Santos T.A., 2016. Maritime Technology and Engineering 3. CRC Press, Inc.
  2. Lee, K.S., Kim, M.C., Shin, Y.J., & Kang, J.G., 2017. Study on performance of asymmetric pre-swirl stator for KVLCC2. Proceeding of the Society of Naval Architects of Korea. 8-9 19-20 November 2017, Yeosu EXPO.
  3. Lee, C.M., Shin, Y.J., Kim, M.C., Choi, J.E., & Chun, H.H., 2016. Design of asymmetric pre-swirl stator for LNG carrier according to variation of stator shapes. Journal of the Society of Naval Architects of Korea, 53(1), pp.37-44. https://doi.org/10.3744/SNAK.2016.53.1.37
  4. Lee, J.T., Kim, M.C., Suh, J.C., Kim, S.H. & Choi, J.K., 1992. Development of pre-swirl stator-propeller system for improvement of propulsion efficiency : a symmetric stator propulsion system. Journal of the Society of Naval Architects of Korea, 41(3), pp.13-21. https://doi.org/10.3744/SNAK.2004.41.3.013
  5. Park, H.J., Kim, K.S., Suh, S.B., & Park, I.R., 2016. CFD Analysis of marine propeller-hub vortex control device interaction. Journal of the Society of Naval Architects of Korea, 53(4), pp.266-274. https://doi.org/10.3744/SNAK.2016.53.4.266
  6. Win, Y.N., Wu, P.C., Akamatsu, K., Okawa, H., Stern, F., & Toda, Y., 2016. RANS simulation of KVLCC2 using simple body-force propeller model with rudder and without rudder. Journal of the Japan Associations of Naval Architects and Ocean Engineers, 23, pp.1-11. https://doi.org/10.2534/jjasnaoe.23.1