Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Optimization of structural elements of transport vehicles in order to reduce weight and fuel consumption

  • Received : 2019.01.12
  • Accepted : 2019.04.03
  • Published : 2019.08.10
⟨ Previous Next ⟩

Abstract

In global competition manufacturing companies have to produce modern, new constructions from advanced materials in order to increase competitiveness. The aim of my research was to develop a new composite cellular plate structure, which can be primarily used for structural elements of road, rail, water and air transport vehicles (e.g. vehicle bodies, ship floors). The new structure is novel and innovative, because all materials of the components of the newly developed structure are composites (laminated Carbon Fiber Reinforced Plastic (CFRP) deck plates with pultruded Glass Fiber Reinforced Plastic (GFRP) stiffeners), furthermore combines the characteristics of sandwich and cellular plate structures. The material of the structure is much more advantageous than traditional steel materials, due mainly to its low density, resulting in weight savings, causing lower fuel consumption and less environmental damage. In the study the optimal construction of a given geometry of a structural element of a road truck trailer body was defined by single- and multi-objective optimization (minimal cost and weight). During the single-objective optimization the Flexible Tolerance Optimization method, while during the multi-objective optimization the Particle Swarm Optimization method were used. Seven design constraints were considered: maximum deflection of the structure, buckling of the composite plates, buckling of the stiffeners, stress in the composite plates, stress in the stiffeners, eigenfrequency of the structure, size constraint for design variables. It was confirmed that the developed structure can be used principally as structural elements of transport vehicles and unit load devices (containers) and can be applied also in building construction.

Keywords

References

  1. Barbero, E.J. (1999), Introduction to Composite Materials Design, Taylor and Francis, USA.
  2. Barkanov, E., Eglitis, E., Almeida, F., Bowering, M.C. and Watson, G. (2016), "Weight optimal design of lateral wing upper covers made of composite materials", Eng. Optimiz., 48(9), 1618-1637. https://doi.org/10.1080/0305215X.2015.1128422.
  3. Blasques, J.P. and Stolpe, M. (2011), "Maximum stiffness and minimum weight optimization of laminated composite beams using continuous fiber angles", Struct. Multidiscip. Optim., 43(4), 573-588. https://doi.org/10.1007/s00158-010-0592-9.
  4. Borri, A. and Speranzini, E. (1993), "Multicriteria optimization of laminated composite material structures", Meccanica, 28(3), 233-238. https://doi.org/10.1007/BF00989126.
  5. Correia, J.R., Bai, Y. and Keller, T. (2015), "A review of the fire behaviour of pultruded GFRP structural profiles for civil engineering applications", Compos. Struct., 127, 267-287. https://doi.org/10.1016/j.compstruct.2015.03.006.
  6. Craig, A.S. (2012), "Optimizing sandwich beam for strength and stiffness", J. Sand. Struct. Mater., 14, 573-595. https://doi.org/10.1177/1099636212449851.
  7. Ferreira, A.D.B.L., Novoa, P.R.O. and Marques, A.T. (2016), "Multifunctional Material Systems: A state-of-the-art review", Compos. Struct., 151, 3-35. https://doi.org/10.1016/j.compstruct.2016.01.028.
  8. Gillet, A., Francescato, P. and Saffre, P. (2010), "Single-and multiobjective optimization of composite structures: the influence of design variables", J. Compos. Mater., 44(4), 457-480. https://doi.org/10.1177/0021998309344931.
  9. Himmelblau, D.M. (1972), Applied Nonlinear Programming, McGraw-Hill, New York, USA.
  10. Hollaway, L.C. (2010), "A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties", Constr. Build. Mater., 24, 2419-2445. https://doi.org/10.1016/j.conbuildmat.2010.04.062.
  11. Houmat, A. (2018), "Optimal lay-up design of variable stiffness laminated composite plates by a layer-wise optimization technique", Eng. Optimiz., 50(2), 205-217. https://doi.org/10.1080/0305215X.2017.1307978.
  12. Jones, R.M. (1993), Mechanics of Composite Materials, Taylor and Francis, USA.
  13. Kalantari, M., Chensong, D. and Ian, J.D. (2017), "Effect of matrix voids, fibre misalignment and thickness variation on multi-objective robust optimization of carbon/glass fibre reinforced hybrid composites under flexural loading", Compos. B. Eng., 123,136-147. https://doi.org/10.1016/j.compositesb.2017.05.022.
  14. Kennedy, J. (1997), "The particle swarm: social adaptation of knowledge", Proceedings of the International Conference on Evolutionary Computation, Indianapolis, USA, October.
  15. Lakshmi, K.A. and Rao, R.M. (2013), "Multi-objective optimal design of laminated composite skirt using hybrid NSGA", Meccanica, 48(6), 1431-1450. https://doi.org/10.1007/s11012-012-9676-5.
  16. Liao, Y.S. and Chiou, C.Y. (2006), "Robust optimum designs of fiber-reinforced composites using constraints with sensitivity", J. Compos. Mater., 40(22), 2067-2081. https://doi.org/10.1177/0021998306061301.
  17. Liu, W., Butler, R. and Kim, H.A. (2008), "Optimization of composite stiffened panels subject to compression and lateral pressure using a bi-level approach", Struct. Multidiscip. Optim., 36(3), 235-245. https://doi.org/10.1007/s00158-007-0156-9.
  18. Marannano, G. and Mariotti, G.V. (2008), "Structural optimization and experimental analysis of composite material panels for naval use", Meccanica, 43(2), 251-262. https://doi.org/10.1007/s11012-008-9120-z.
  19. Nikbakt, S., Kamarian, S. and Shakeri, M. (2018), "A review on optimization of composite structures Part I: Laminated composites", Compos. Struct., 195, 158-185. https://doi.org/10.1016/j.compstruct.2018.03.063.
  20. Noor, A.K., Burton, W.S. and Bert, C.W. (1996), "Computational models for sandwich panels and shells", Appl. Mech. Rev., 49(3), 155-199. https://doi.org/10.1115/1.3101923.
  21. Peng, W., Chen, J., Wei, J. and Tu, W. (2010), "Optimal strength design for fiber-metal laminates and fiber-reinforced plastic laminates", J. Compos. Mater., 45(2), 237-254. https://doi.org/10.1177/0021998310373521.
  22. Rajasekaran, S. (2010), "Optimal laminate sequence of thin-walled composite beams of generic section using evolution strategies", Struct. Eng. Mech., 34(5), 597-609. https://doi.org/10.12989/sem.2010.34.5.597.
  23. Rao, A.R.M. and Arvind, N. (2007), "Optimal stacking sequence design of laminate composite structures using tabu embedded simulated annealing", Struct. Eng. Mech., 25(2), 239-268. https://doi.org/10.12989/sem.2007.25.2.239.
  24. Rao, A.R.M. and Lakshmi, K. (2012), "Optimal design of stiffened laminate composite cylinder using a hybrid SFL algorithm", J. Compos. Mater., 46(24), 3031-3055. https://doi.org/10.1177/0021998311435674.
  25. Sohouli, A., Yildiz, M. and Suleman, A. (2017), "Design optimization of thin-walled composite structures based on material and fiber orientation", Compos. Struct., 176, 1081-1095. https://doi.org/10.1016/j.compstruct.2017.06.030.
  26. Vinson, J.R. (2001), "Sandwich structures", Appl. Mech. Rev., 54(3), 201-214. https:/doi.org/10.1115/1.3097295.
  27. Vo-Duy, T., Duong-Gia, D., Ho-Huu,V., Vu-Do, H.C. and Nguyen-Thoi, T. (2017), "Multi-objective optimization of laminated composite beam structures using NSGA-II algorithm", Compos. Struct., 16, 498-509. https://doi.org/10.1016/j.compstruct.2017.02.038.
  28. Wang, D., Abdalla, M.M. and Zhang, W. (2017), "Buckling optimization design of curved stiffeners for grid-stiffened composite structures", Compos. Struct., 159, 656-666. https://doi.org/10.1016/j.compstruct.2016.10.013.
  29. Zenkert, D. (1995), An Introduction to Sandwich Construction, EMAS Publication, W Midlands, United Kingdom.